Fujitsu PDS4241 User Manual

Fujitsu PDS4241 Manual

Get Fujitsu PDS4241 PDF manuals and user guides View all Fujitsu PDS4241 manuals
Add to My Manuals
Save this manual to your list of manuals

Fujitsu PDS4241 manual content summary:

  • Fujitsu PDS4241 | User Manual - Page 1
    English USER'S MANUAL 42" WIDE PLASMA DISPLAY PDS4241W/PDS4242W Contents Page Before Use • Safety Precautions E-2-E-3 • Features E-4 • Accessories E-5 • Handy Tips E-5 • Installation E-6 Usage • Part Names and Functions E-7-E-10 • Using the Remote Control E-11 • Connecting the Display to
  • Fujitsu PDS4241 | User Manual - Page 2
    , Centennial Avenue Elstree, Hertfordshire, WD6 3SG Manufacturer: Shinjyo Fujitsu General Limited 702-3 Kanazawa Shinjyo-shi Yamagata Japan declares under our sole responsibility that the product, Type: 42" PLASMA DISPLAY Model Name: PDS4241W to which this declaration relates are in conformity
  • Fujitsu PDS4241 | User Manual - Page 3
    , Centennial Avenue Elstree, Hertfordshire, WD6 3SG Manufacturer: Shinjyo Fujitsu General Limited 702-3 Kanazawa Shinjyo-shi Yamagata Japan declares under our sole responsibility that the product, Type: 42" PLASMA DISPLAY Model Name: PDS4242W to which this declaration relates are in conformity
  • Fujitsu PDS4241 | User Manual - Page 4
    PRECAUTIONS FCC NOTICE • PDS4241W: A Class A if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. and service. Please read these "Important Safeguards" carefully before use. - All the safety and operating instructions should
  • Fujitsu PDS4241 | User Manual - Page 5
    : a) When the power supply cord or plug is damaged. b) If liquid has been spilled, or objects have fallen on the product. c) If the product has been exposed to rain or water. d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are
  • Fujitsu PDS4241 | User Manual - Page 6
    and RGB, signals, this display supports input of high-quality video Power management function • The display features a DPMS (Display Power Management Signaling) function that ensures automatic power saving capability. Flexible as part of a system • You can operate the display by remote control
  • Fujitsu PDS4241 | User Manual - Page 7
    CHECKING ACCESSORIES One remote control Two AA batteries One user's manual One power cable Two ferrite cores Manual HANDY TIPS • Pictures may become "burnt" into the screen phosphors if the screen is left on for extended periods. To ensure that the display has a prolonged service life, be
  • Fujitsu PDS4241 | User Manual - Page 8
    performs the installation. See the appropriate instruction manual for more information on the installation hardware the display sideways or backward. * To prevent the power and other cables from being accidentally pulled, make sure originally supplied with the display when repacking it. Reference
  • Fujitsu PDS4241 | User Manual - Page 9
    of the power supply. Lit (red): Stand-by Lit (green): Power ON Lit (orange): Power saving (DPMS: Power saving function) mode ON Flashing (red): Malfunction (Flashes differently depending on the type of malfunction. See P. E-44 for more information.) 2 Remote control signal receiver Receives
  • Fujitsu PDS4241 | User Manual - Page 10
    4 to 16 Ω.) *See the speaker instruction manual for more information. 2 Sound 1 input (RS-232C) This terminal is provided for you to control the display from the PC. Connect it to the RS See P. E-33.) B Power input terminal Connect this terminal to the power cable supplied with the display. When
  • Fujitsu PDS4241 | User Manual - Page 11
    English Description of Input Terminals DVI-D terminal (RGB 1 INPUT/DVI-D) RGB2 input terminal (RGB2 INPUT/mD-sub) Pin No. Input signal Pin No. Input signal 1 Red 9 - 2 Green 10 Ground 3 Blue 11 - 4 - 12 - 5 Ground 13 Horizontal synchronization 6 Ground 14 Vertical
  • Fujitsu PDS4241 | User Manual - Page 12
    PART NAMES AND FUNCTIONS (Continued) Remote Control 1 3 8 1 Power ON button [POWER ON] ➝ (See P. E-14.) 2 Turns the power ON. 5 2 Power OFF button [POWER OFF] 4 Turns the power OFF. ➝ (See P. E-14.) 6 3 RGB input mode selector button [RGB] Switches between RGB input modes. 7 4 Video input
  • Fujitsu PDS4241 | User Manual - Page 13
    there are no obstacles between the remote control and the display's signal receiver. Left 30° 30° Right 5 m (Front) Upper 20° 20° Lower Information The remote control may not function properly if you use a high-frequency fluorescent lamp. If you experience problems, move the lamp or use the
  • Fujitsu PDS4241 | User Manual - Page 14
    Be sure to turn OFF the power to the display and external equipment before making any connections. No cables are supplied with the display for connection to any connections. Loose connectors can result in picture or color problems. Make sure that all connectors are securely inserted into their
  • Fujitsu PDS4241 | User Manual - Page 15
    English POWER INPUT COMPONENT VIDEO INPUT (color difference input) / RGB3 INPUT RGB2 RGB1 INPUT INPUT (mD-sub) (DVI-D) RS-232C S-VIDEO INPUT VIDEO INPUT AUDIO2 AUDIO1 INPUT
  • Fujitsu PDS4241 | User Manual - Page 16
    of the display. When you do so, the main power turns ON. 2 Press control. on the remote When you do so, the power indicator lamp turns green. 3 Press or to select a desired input mode. * You can also use the switches on the display's control panel to accomplish these steps. TURNING OFF THE
  • Fujitsu PDS4241 | User Manual - Page 17
    Each time you press , a different input mode appears. The sequence is as follows: * You can also use the switches on the display's control panel to accomplish these steps. RGB1:Displays pictures from equipment connected to the RGB1 (DVI-D) terminal. RGB2:Displays pictures from equipment connected
  • Fujitsu PDS4241 | User Manual - Page 18
    you are in a Video or S-video input mode When you are in a Comp.video input mode * You can also use the switches on the display's control panel to accomplish these steps. When you are in an RGB input mode Wide1 mode * Depending on the type of signal, some aspects may not
  • Fujitsu PDS4241 | User Manual - Page 19
    English SCREEN SIZE Normal Displays pictures of normal size (i.e., a 4:3 aspect ratio). Auto The screen size changes automatically in accordance with the contents of image software you use. Wide1 Displays natural-looking pictures of standard size on the wide screen. Picture of standard size
  • Fujitsu PDS4241 | User Manual - Page 20
    HOW TO USE MENUS SELECTING OPTIONS IN A MENU Use the [MODE] button on the display or and on the remote control to select a desired input mode. 1 Press . The main menu screen will appear. 2 Press or to switch between sub-menus. Each time you press or , one
  • Fujitsu PDS4241 | User Manual - Page 21
    English Option (1) Contrast Function Adjusts picture contrast. (2) Brightness Adjusts screen brightness. (3) Color (for Video, S-video, Comp.video) (4) Tint (for Video, S-video, Comp.video) (5) Sharpness Adjusts color darkness. Adjusts tint. Adjusts picture sharpness. Operation : Higher
  • Fujitsu PDS4241 | User Manual - Page 22
    HOW TO USE MENUS (Continued) USING THE AUDIO MENU When you finish selecting a desired option in the AUDIO menu screen, press . When you do so, the adjustment screen for that option appears. Press or to select option and press or to make adjustment. Press to store. (See P. E-28-E-29.) The
  • Fujitsu PDS4241 | User Manual - Page 23
    selected with or . Use or to select the optimum value for eliminating flicker. Use or for switching. Range -60 to +60 Auto/Manual (Can adjust 1 to 32 for Manual) -1 to +1 -8 to +8 Display Auto Calibration screen and press to execute. Select Execute, and select Yes and press to execute Auto
  • Fujitsu PDS4241 | User Manual - Page 24
    HOW TO USE MENUS (Continued) Input Terminal Menu(See P. E-30, E-33-E-34.) Option (1) Video Input (for Video) (2) S-video Input (for S-video) (3) BNC Input (4) D-SUB Input Function Selects video mode. Selects video mode. Selects BNC Input signal. Selects D-SUB Input signal. Operation Use or for
  • Fujitsu PDS4241 | User Manual - Page 25
    . Sets up to display white over the entire screen. Sets up Exhibition mode. Display Code Setting screen and press or to select an option. Select Manual to set up Parameter. Use or for switching. Use or for switching. Sets up whether horizontal or vertical installation. Locks the main unit button
  • Fujitsu PDS4241 | User Manual - Page 26
    Menu screen will appear. "PICTURE" selected in the main menu screen FEATURES FACTORY DEFAULT * You can also use the switches on the display's control panel to accomplish these steps. 3 Press or to select "Tint". 4 Press . The "Tint" adjustment screen will appear. 5 Press or to change tint
  • Fujitsu PDS4241 | User Manual - Page 27
    English • Adjusting Contrast (Contrast) Any value between -30 and +30 can be selected. : Higher contrast : Lower contrast Press to store. • Adjusting Screen Brightness (Brightness) Any value between -60 and +60 can be selected. : Brighter screen : Darker screen Press to store. •
  • Fujitsu PDS4241 | User Manual - Page 28
    will appear. "POSITION/SIZE" selected from the main menu screen FEATURES FACTORY DEFAULT * You can also use the switches on the display's control panel to accomplish these steps. 3 Press or "Position". to select 4 Press . The "Position" adjustment screen will appear. 5 Press or to select
  • Fujitsu PDS4241 | User Manual - Page 29
    English Adjusting Screen Position (Position) Horizontal position (Horizontal) : Moves screen to the right. → : Moves screen to the left. → Vertical position (Vertical) : Moves screen up. → : Moves screen down. → Press to store. Adjusting Screen Size (Size) Screen width (Width) : Increases
  • Fujitsu PDS4241 | User Manual - Page 30
    in the main menu screen FEATURES FACTORY DEFAULT 3 Press or "Balance". to select * You can also use the switches on the display's control panel to accomplish these steps. 4 Press . The "Balance" adjustment screen will appear. 5 Press or to adjust the balance. : Higher volume from the
  • Fujitsu PDS4241 | User Manual - Page 31
    English Adjusting Treble (Treble) Any value between -6 and +6 can be selected. : Stronger treble : Weaker treble Adjusting Bass (Bass) Any value between -6 and +6 can be selected. : Stronger bass : Weaker bass Adjusting Volume Balance (Balance) Any value between -10 and +10 can be selected. :
  • Fujitsu PDS4241 | User Manual - Page 32
    in the main menu screen FEATURES FACTORY DEFAULT The FEATURES Menu screen will appear. * You can also use the switches on the display's control panel to accomplish these steps. 3 Press or Menu". to select "On Screen • Select a desired option for adjustment/setup from Adjustment, Function, On
  • Fujitsu PDS4241 | User Manual - Page 33
    or No. Yes: Stores the data of Auto Calibration. No: Disables the execution result of Auto Calibration. (3) Press to execute. When selecting Manual by Clock Phase "Auto Calibration" setting screen "Yes/No" selection screen * On-screen information disappears if you do not take any action for
  • Fujitsu PDS4241 | User Manual - Page 34
    , one of the available choices appears in the following sequence: -90 Deg. : Displays text from left to right when the display is installed with the power indicator lamp at the top. Normal : Displays text normally. +90 Deg. : Displays text from left to right when the display is installed with the
  • Fujitsu PDS4241 | User Manual - Page 35
    English INPUT TERMINAL • Selecting Video Mode (Video Input) You can use this option to select the desired video mode of pictures it will receive to the Video Input terminal. Each time you press or , one of the available modes appears in the following sequence: Auto: Automatically selects NTSC,
  • Fujitsu PDS4241 | User Manual - Page 36
    is ON and the display has not received any signals for the predetermined period of time. When DPMS is active, the power indicator lamp turns orange. (1) Select DPMS and press . DPMS screen appears. (2) Press or to select Time. (3) Each time you press or , one of the available
  • Fujitsu PDS4241 | User Manual - Page 37
    sequence: "Screen Orbiter" setting screen Off:Disables Screen Orbiter. Time: Moves the pattern approximately every one hour. Mode: Moves the pattern when the power is turned ON or when you switch between modes. (4)Press or to select "Moving Area". (5) Press or to select the range for moving the
  • Fujitsu PDS4241 | User Manual - Page 38
    over the entire screen. When the predetermined time elapses, the power will turn OFF. When using the display continuously When switching between When you use two or more displays, you can use a single remote control to control individual displays by assigning a unique number to each of the displays
  • Fujitsu PDS4241 | User Manual - Page 39
    signal by code number. Each time you press or , one of the available choices appears in the following sequence: Auto Manual Auto: Automatically displays the input signal to the optimum. Manual: Selects RGB code number. Press to store. * In Auto mode, the optimum resolution may not be set up
  • Fujitsu PDS4241 | User Manual - Page 40
    display returns to the original setting in about 5 minutes even if the adjustment is changed. * The setup will be cancelled when removing the power plug from the receptacle. • Horizontal/Vertical installation (Installation) All modes You can use this option to setup the number of fan rotation
  • Fujitsu PDS4241 | User Manual - Page 41
    /setting made in the MENU to factory settings. 1 Press . The main menu screen will appear. * You can also use the switches on the display's control panel to accomplish these steps. 2 Press or to select "FACTORY DEFAULT". Each time you press or , one of the available menus appears in the
  • Fujitsu PDS4241 | User Manual - Page 42
    Stand 0° to 15° mounting angle (variable) The pipe is not supplied with the ceilinghanging unit, so consult your produce dealer. P-42CT11 P-42TT29 that all installation requirements for that option (as given in the relevant instruction manual) are met. * The colors of options do not match the
  • Fujitsu PDS4241 | User Manual - Page 43
    . The fifth input signal will replace the adjustment value of the first input signal. To do this, select a desired signal and follow the instructions in "Adjusting Screen Position and Size" on P. E-26-E-27 to adjust the parameters. When you finish, the settings will be automatically stored. Thus
  • Fujitsu PDS4241 | User Manual - Page 44
    104 °F Humidity: 20 to 90 % Accessories 1 remote control, 2AA batteries, 1 instruction manual, 1 power cable, 2 ferrite cores • Specifications and external appearance may be change for the sake of improvement. • is a worldwide trademark of Fujitsu General Limited and is a registered trademark
  • Fujitsu PDS4241 | User Manual - Page 45
    English Regulation --- PDS4241W • UL, CSA Safety: UL1950/CSA C22.2 No.950 EMC: FCC Part 15 Class 1996 EN61000-4-8 1993 EN61000-4-11 1994 • AS Safety: IEC60950 A1/A2/A3/A4 EMC: AS/NZS 3548 Regulation --- PDS4242W • UL, CSA Safety: UL1950/CSA C22.2 No.950 EMC: FCC Part 15 Class B, ICES-003 Class B •
  • Fujitsu PDS4241 | User Manual - Page 46
    before contacting your dealer for servicing. Problem • Power does not turn ON. • No pictures are displayed. • Remote control does not function properly. • below, the power indicator lamp flashes differently depending on the type of problem: - Flashes repeatedly: Improper supply voltage level -
  • Fujitsu PDS4241 | User Manual - Page 47
    1116, Suenaga, Takatsu-ku, Kawasaki 213-8502, Japan Printed in Japan 8113122015
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
Before using the display, read this manual carefully so that you know how to use the display correctly.
Refer to this manual whenever questions or problems about operation arise.
Be sure to read and observe the
safety precautions.
Keep this manual where the user can see it easily.
* Installation and removal require special expertise.
Consult your product dealer for details.
Contents
USER’S MANUAL
42” WIDE PLASMA DISPLAY
PDS4241W/PDS4242W
Before Use
•
Safety Precautions ··································· E-2–E-3
• Features ····························································E-4
• Accessories ······················································ E-5
•
Handy Tips
······················································· E-5
• Installation ······················································· E-6
Usage
•
Part Names and Functions ···················· E-7–E-10
•
Using the Remote Control ···························· E-11
•
Connecting the Display to External
Equipment ············································ E-12–E-13
•
Basic Operations ············································E-14
•
Selecting Input Mode·····································E-15
•
Watching Pictures on the Wide Screen
··· E-16–E-17
•
How to Use Menus ······························· E-18–E-23
Adjustments
•
Adjusting Pictures (PICTURE Menu) ··· E-24–E-25
•
Adjusting Screen Position and Size
(POSITION/SIZE Menu) ························ E-26–E-27
•
Adjusting Audio (AUDIO Menu) ········· E-28–E-29
•
Other Adjustments (FEATURES Menu)
··· E-30–E-38
•
Initialization of user adjustment value
(FACTORY DEFAULT) ·····································E-39
Others
• Options ····························································E-40
•
Factory Settings ············································ E-41
• Specification ··················································· E-42
•
Cleaning and Maintenance····························E-44
Page
Page
English