Fujitsu PDS5001 User Manual

Fujitsu PDS5001 Manual

Get Fujitsu PDS5001 PDF manuals and user guides View all Fujitsu PDS5001 manuals
Add to My Manuals
Save this manual to your list of manuals

Fujitsu PDS5001 manual content summary:

  • Fujitsu PDS5001 | User Manual - Page 1
    English USER'S MANUAL 50" WIDE PLASMA DISPLAY PDS5001W/PDS5001U/ PDS5002W/PDS5002U Contents Page Before Use • Safety Precautions E-2-E-3 • Features manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions. Keep this manual where the user can
  • Fujitsu PDS5001 | User Manual - Page 2
    , Centennial Avenue Elstree, Hertfordshire, WD6 3SG Manufacturer: Shinjyo Fujitsu General Limited 702-3 Kanazawa Shinjyo-shi Yamagata Japan declares under our sole responsibility that the product, Type: 50" PLASMA DISPLAY Model Name: PDS5001W to which this declaration relates are in conformity
  • Fujitsu PDS5001 | User Manual - Page 3
    1973 Place of Issue: United Kingdom Date of Issue: Oct. 2001 Signature: H. Hirosaki, Chief Exective Officer Fujitsu General (U.K) Co. Limited Declaration reference: Fujitsu General (U.K) Co. Limited Unit 150, Centennial Park, Centennial Avenue Elstree, Hertfordshire, WD6 3SG, United Kingdom
  • Fujitsu PDS5001 | User Manual - Page 4
    SAFETY PRECAUTIONS FCC NOTICE • PDS5001W/PDS5001U: A Class A digital device This equipment has been tested and found to equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
  • Fujitsu PDS5001 | User Manual - Page 5
    service to qualified service personnel. - Unplug this product from the wall outlet and refer service to qualified service the operating instructions. Adjust only those controls that are covered by the Operation Manual, as products such as VCR's, and personal computers, you should turn off the power
  • Fujitsu PDS5001 | User Manual - Page 6
    and performance, it is perfectly suited for multimedia applications. Variety of input signals • In addition to video, S-video, and RGB, signals, this display supports input of high-quality video signals such as DVD and HDTV. • The display has an RGB input terminal to receive digital RGB signal of
  • Fujitsu PDS5001 | User Manual - Page 7
    user's manual One power cable Two ferrite cores Manual (W type) HANDY TIPS (U type) • Pictures may become "burnt" into the screen phosphors if the screen is left on for extended periods. To ensure that the display has a prolonged service developed a problem. When with the instructions given on
  • Fujitsu PDS5001 | User Manual - Page 8
    unit is recommended to use for installing on the wall . Also, be also sure that your dealer performs the installation. See the appropriate instruction manual for more information on the installation hardware you select. To prevent an accident and ensure safety in the event of an earthquake, fix the
  • Fujitsu PDS5001 | User Manual - Page 9
    to finalize the selection of a desired option in a menu. Warning If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the power plug from the receptacle and contact your dealer. Leaving the display power ON can result
  • Fujitsu PDS5001 | User Manual - Page 10
    PART NAMES AND FUNCTIONS (Continued) Bottom 1 RGB 2 input terminal (RGB 2 INPUT/mD-sub) Connect this terminal to the PC's display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal. 2 RGB 1 input terminal (RGB 1 INPUT/DVI-D) Connect this terminal to the PC's
  • Fujitsu PDS5001 | User Manual - Page 11
    English Description of Input Terminals DVI-D terminal (RGB 1 INPUT/DVI-D) mD-sub terminal (RGB2 INPUT/mD-sub) RS-232C terminal (RS-232C) Pin No. Input signal Pin No. Input signal 1 Red 9 - 2 Green 10 Ground 3 Blue 11 - 4 - 12 - 5 Ground 13 Horizontal synchronization 6
  • Fujitsu PDS5001 | User Manual - Page 12
    PART NAMES AND FUNCTIONS (Continued) Remote Control 1 3 8 1 Power ON button [POWER ON] ➝ (See P. E-14.) 2 Turns the power ON. 5 2 Power OFF button [POWER OFF] 4 Turns the power OFF. 6 3 RGB input mode selector button [RGB] Switches between RGB input modes. 7 4 Video input mode selector
  • Fujitsu PDS5001 | User Manual - Page 13
    ° 30° Right 5 m (Front) Upper 20° 20° Lower Information The remote control may not function properly if you use a high-frequency fluorescent lamp. If you experience problems, move the lamp or use the remote control from a different position. E-11
  • Fujitsu PDS5001 | User Manual - Page 14
    EQUIPMENT Carefully check the terminals for position and type before making any connections. Loose connectors can result in picture or color problems. Make sure that all connectors are securely inserted into their terminals. Terminal VIDEO INPUT S-VIDEO INPUT COMPONENT VIDEO INPUT RGB INPUT
  • Fujitsu PDS5001 | User Manual - Page 15
    English VIDEO INPUT S-VIDEO INPUT RS-232C RGB1 INPUT (DVI-D) RGB2 INPUT (mD-sub) COMPONENT VIDEO INPUT (color difference input) / RGB3 INPUT To video output terminal To S-video output terminal To RS-232C To display To display output (digital RGB) (analog RGB) terminal output output
  • Fujitsu PDS5001 | User Manual - Page 16
    BASIC OPERATIONS TURNING ON THE POWER 1 Select the OFF/STD-BY switch at the STD-BY of the display. When you do so, the power indicator lamp turns red. 2 Press control. on the remote When you do so, the power indicator lamp turns green. 3 Press or to select a desired input mode. * You can
  • Fujitsu PDS5001 | User Manual - Page 17
    English SELECTING INPUT MODE VIDEO INPUT MODE 1 Press mode. to select a desired input Each time you press , a different input mode appears. The sequence is as follows: * You can also use the switches on the display's control panel to accomplish these steps. Video: Displays pictures from
  • Fujitsu PDS5001 | User Manual - Page 18
    WATCHING PICTURES ON THE WIDE SCREEN SWITCHING BETWEEN SCREEN SIZES 1 Press . The currently selected mode will appear. 2 Press to select a desired picture mode. Each time you press , a different picture mode appears. The sequences used are as follows: Normal mode When you are in a Video or
  • Fujitsu PDS5001 | User Manual - Page 19
    English SCREEN SIZE Normal Displays pictures of normal size (i.e., a 4:3 aspect ratio). Auto The screen size changes automatically in accordance with the contents of image software you use. Wide1 Displays natural-looking pictures of standard size on the wide screen. Picture of standard size
  • Fujitsu PDS5001 | User Manual - Page 20
    HOW TO USE MENUS SELECTING OPTIONS IN A MENU Use the [MODE] button on the display or and on the remote control to select a desired input mode. 1 Press . The main menu screen will appear. 2 Press or to switch between sub-menus. Each time you press or , one of the available menus appears. The
  • Fujitsu PDS5001 | User Manual - Page 21
    (Comp.video, RGB) -16 to +16 Video, S-video, Comp.video Dynamic1/Dynamic2/ Dynamic3/Dynamic4 RGB Dynamic1/Dynamic2/ Dynamic3/Dynamic4/Static Warm/Standard/Cool/User 0 to 255 for each of Red, Green and Blue Off/Min./Std./Max. USING THE POSITION/SIZE MENU When you finish selecting a desired option
  • Fujitsu PDS5001 | User Manual - Page 22
    with or . Use or to select the optimum value for eliminating flicker. Use or for switching. Range -60 to +60 Auto/Manual (Can adjust 1 to 32 for Manual) -1 to +1 -8 to +8 Selects the optimum dynamic range of images. Display Auto Calibration screen and press to execute. Select Execute, and
  • Fujitsu PDS5001 | User Manual - Page 23
    English Function Menu(See P. E-28, E-30.) Option (1) 24 Frame Mode (for Video, S-video, Comp.video) (2) 3D Y/C (for Video(3.58NTSC)) Function Displays the optimum movie pictures. Selects whether to enable the 3D Y/C circuit. Operation Use or for switching. Use or for switching. Range On (Movie)
  • Fujitsu PDS5001 | User Manual - Page 24
    Display Code Setting screen and press or to select an option. Select Manual to set up Parameter. Use or for switching. Use or for switching XGA/ WXGA RGB2, RGB3: Auto/VGA/WVGA/480P/ XGA/WXGA/SXGA/ SXGA+ Auto/Manual On /Off(disabled) On (Exhibition mode)/ Off(disabled) -90 Deg. (counterclockwise)/
  • Fujitsu PDS5001 | User Manual - Page 25
    English USING THE FACTORY DEFAULT MENU • Select FACTORY DEFAULT and execute to restore the adjustment/setting made in the MENU to factory settings. (See P. E-36.) FACTORY DEFAULT Menu screen Yes/No selection screen Option FACTORY DEFAULT Function Restores the adjustment/ setting made in the
  • Fujitsu PDS5001 | User Manual - Page 26
    ADJUSTING PICTURES (PICTURE MENU) BASIC OPERATIONS [EX.: ADJUSTING TINT (Tint)] You can make changes to all picture adjustment options in the PICTURE Menu. The changes you make will be stored for a selected input mode. Therefore, you need to select a desired input mode before making any changes.
  • Fujitsu PDS5001 | User Manual - Page 27
    appears in the following sequence: Warm: More reddish colors Standard:Standard color temperature Cool: More bluish colors User: User Color Temp. setup • Setting User Color Temp. (User Color Temp.) Can set up when User is selected in Color Temp. Press or to select Red, Green or Blue and press or to
  • Fujitsu PDS5001 | User Manual - Page 28
    ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU) BASIC OPERATION [EX.: ADJUSTING HORIZONTAL DIRECTION OF SCREEN POSITION] You can make changes to all screen adjustment options in the POSITION/SIZE Menu. The changes you make will be stored for the selected input mode. Therefore, you need to
  • Fujitsu PDS5001 | User Manual - Page 29
    English Adjusting Screen Position (Position) Horizontal position (Horizontal) : Moves screen to the right. → : Moves screen to the left. → Vertical position (Vertical) : Moves screen up. → : Moves screen down. → Press to store. Adjusting Screen Size (Size) Screen width (Width) : Increases
  • Fujitsu PDS5001 | User Manual - Page 30
    OTHER ADJUSTMENTS (FEATURES MENU) BASIC OPERATION [EX. : SELECTING LANGUAGE (Language)] You can make the following changes in the FEATURES Menu. 1 Press . The main menu screen will appear. 2 Press or to select "FEATURES". Each time you press or , one of the available menus appears in the
  • Fujitsu PDS5001 | User Manual - Page 31
    or No. Yes: Stores the data of Auto Calibration. No: Disables the execution result of Auto Calibration. (3) Press to execute. When selecting Manual by Clock Phase "Auto Calibration" setting screen "Yes/No" selection screen * On-screen information disappears if you do not take any action for
  • Fujitsu PDS5001 | User Manual - Page 32
    OTHER ADJUSTMENTS (FEATURES MENU)(Continued) FUNCTION • Displaying the optimum movie pictures (24 Frame Mode) Can make the optimum display of 24 frames/second signals such as movie pictures. Each time you press or , one of the available choices appears in the following sequence: On Off On :
  • Fujitsu PDS5001 | User Manual - Page 33
    English INPUT TERMINAL • Selecting Video Mode (Video Input) You can use this option to select the desired video mode of pictures it will receive to the Video Input terminal. Each time you press or , one of the available modes appears in the following sequence: Auto: Automatically selects NTSC,
  • Fujitsu PDS5001 | User Manual - Page 34
    OTHER ADJUSTMENTS (FEATURES MENU)(Continued) INPUT TERMINAL • Selecting D-SUB Input (D-SUB Input) All modes You can use this option to select the signal system it will receive to D-SUB Input terminal. (1) Select D-SUB Input and press . D-SUB Input screen appears. (2) Select the signal system
  • Fujitsu PDS5001 | User Manual - Page 35
    English • Minimizing phosphor burn-in (Screen Orbiter) You can use this option to move the screen position to minimize phosphor-induced "burn-in". Follow the steps below. (1) Select "Screen Orbiter" and press . The "Screen Orbiter" setting screen will appear. (2) Press or to select "Mode/Time
  • Fujitsu PDS5001 | User Manual - Page 36
    signal by code number. Each time you press or , one of the available choices appears in the following sequence: Auto Manual Auto: Automatically displays the input signal to the optimum. Manual: Selects RGB code number. Press to store. * In Auto mode, the optimum resolution may not be set up
  • Fujitsu PDS5001 | User Manual - Page 37
    English • Setting Exhibition Mode (Exhibition Mode) All modes You can use this option to display the enhanced contrast, which is most suitable for the use by unspecified persons. Each time you press or , one of the available choices appears in the following sequence: On Off On: Sets up
  • Fujitsu PDS5001 | User Manual - Page 38
    INITIALIZATION OF USER ADJUSTMENT VALUE(FACTORY DEFAULT) BASIC OPERATION [EX.: RESTORINGTHE VALUES OFTHE ADJUSTMENT/SETTINGTO FACTORY SETTINGS] You can restore the values of the adjustment/setting made in
  • Fujitsu PDS5001 | User Manual - Page 39
    that all installation requirements for that option (as given in the relevant instruction manual) are met. * The colors of options do not match the your dealer. CAUTION: This display (PDS5001W/PDS5001U/PDS5002W/PDS5002U) is for use only with Fujitsu General Limited's option (P-50WB01, P-50CT01
  • Fujitsu PDS5001 | User Manual - Page 40
    the first input signal. To do this, select a desired signal and follow the instructions in "Adjusting Screen Position and Size" on P. E-26-E-27 to adjust the for the sake of improvement. • is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and
  • Fujitsu PDS5001 | User Manual - Page 41
    °F Humidity: 20 to 80 % Accessories 1 remote control, 2AA batteries, 1 instruction manual, 1 power cable, 2 ferrite cores Regulation --- PDS5001W/PDS5002W Regulation --- PDS5001U/PDS5002U • EMC:FCC Part 15 Class A, ICES-003 Class A (PDS5001W) EMC:FCC Part 15 Class B, ICES-003 Class B (PDS5002W
  • Fujitsu PDS5001 | User Manual - Page 42
    In the event of problems with the display, check the following explanations before contacting your dealer for servicing. Problem • Power does not turn setup may have been made. Return to original setup or initialize the User adjustment value. • Check for incorrect battery orientation. • Check for
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
Before using the display, read this manual carefully so that you know how to use the display correctly.
Refer to this manual whenever questions or problems about operation arise.
Be sure to read and observe the
safety precautions.
Keep this manual where the user can see it easily.
* Installation and removal require special expertise.
Consult your product dealer for details.
Contents
USER’S MANUAL
50” WIDE PLASMA DISPLAY
PDS5001W/PDS5001U/
PDS5002W/PDS5002U
Before Use
•
Safety Precautions ··································· E-2–E-3
• Features ···························································· E-4
• Accessories ······················································ E-5
•
Handy Tips
······················································· E-5
• Installation ······················································· E-6
Usage
•
Part Names and Functions ···················· E-7–E-10
•
Using the Remote Control ···························· E-11
•
Connecting the Display to External
Equipment ············································ E-12–E-13
•
Basic Operations ············································ E-14
•
Selecting Input Mode·····································E-15
•
Watching Pictures on the Wide Screen··
E-16–E-17
•
How to Use Menus ······························· E-18–E-23
Adjustments
•
Adjusting Pictures (PICTURE Menu) ··· E-24–E-25
•
Adjusting Screen Position and Size
(POSITION/SIZE Menu) ························ E-26–E-27
•
Other Adjustments (FEATURES Menu) ··
E-28–E-35
•
Initialization of user adjustment value
(FACTORY DEFAULT) ·····································E-36
Others
• Options ····························································E-37
•
Factory Settings ············································ E-38
• Specification ···················································E-39
•
Cleaning and Maintenance····························E-40
Page
Page
English