Fujitsu fi-4860C Installation Guide

Fujitsu fi-4860C Manual

Get Fujitsu fi-4860C PDF manuals and user guides View all Fujitsu fi-4860C manuals
Add to My Manuals
Save this manual to your list of manuals

Fujitsu fi-4860C manual content summary:

  • Fujitsu fi-4860C | Installation Guide - Page 1
    P3PC-E177-03EN fi-4860C Image Scanner Installation Guide
  • Fujitsu fi-4860C | Installation Guide - Page 2
    contents of the scanner package, part names, and operator panel operation. 2. INSTALLATION AND CONNECTIONS This chapter describes how to install and connect the scanner to a PC, and how to install the scanner application software. The "Operator's Guide" is stored on the "User Manual (CD-ROM)". The
  • Fujitsu fi-4860C | Installation Guide - Page 3
    this scanner. 7. OPERATOR PANEL MENUS This chapter describes Setup-mode and Test-mode. 8. OPTIONS This chapter describes options. 9. SCANNER SPECIFICATIONS This chapter lists the scanner specifications. We hope that this manual is useful in taking full advantage of the fi-4860C Duplex Color Scanner
  • Fujitsu fi-4860C | Installation Guide - Page 4
    if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment the user's authority to operate the equipment. • The use of a shielded interface cable is required to comply with the Class A limits of Part 15 of
  • Fujitsu fi-4860C | Installation Guide - Page 5
    Bescheimigung des Herstellers / Importeurs Hiermit wird bescheinigt, daß der/dieldas •fi-4860C in Übereinsstimmung mit den Bestimmungen der •AmtsblVfg 243/1991 funkentstört ist. Der Deutschen Bundesport wurde das Inverkehrbringen dieses Gerätes angezeigt und die Berechtigung
  • Fujitsu fi-4860C | Installation Guide - Page 6
    monitors, printers, facsimiles, copiers, scanners, and multifunction devices. Their standards flight control of aircraft, air traffic control, operation control in mass-transport systems, medical equipment safety in question is not ensured. The user should use this product without adopting measures
  • Fujitsu fi-4860C | Installation Guide - Page 7
    contained in the scanner parts. Disposing of the scanner should be conducted as required by local ordinances or regulations. Illegal Copying Reproducing bills, coins, government securities and passports, licenses issued by public author or civilian organizations, official documents, private paper is
  • Fujitsu fi-4860C | Installation Guide - Page 8
    companies. How Trademarks Are Indicated In This Manual References to operating systems (OS) are indicated as follows: Windows® 95: Refers to Microsoft® Windows® 95 operating system. Windows® 98: Refers to Microsoft® Windows® 98 operating system. Windows® Me: Refers to Refers to Microsoft
  • Fujitsu fi-4860C | Installation Guide - Page 9
    CAREFULLY BEFORE USING THIS PRODUCT. IF NOT USED CORRECTLY, UNEXPECTED INJURY MAY BE CAUSED TO USERS OR BYSTANDERS. While all efforts have been made to ensure the accuracy of all information in this manual, PFU LIMITED assumes no liability to any party for any damage caused by errors or omissions
  • Fujitsu fi-4860C | Installation Guide - Page 10
    . Warning Indications Used In This Manual This manual uses the following indications to ensure safe and correct use of this product, and to prevent possible danger and injury to the operator and other persons. CAUTION This indication alerts operators to an operation that, if not strictly observed
  • Fujitsu fi-4860C | Installation Guide - Page 11
    . This symbol alerts operators to helpful advice regarding oper- HINT ation. A TRIANGLE symbol indicates that special care and attention is required. The drawing inside the triangle shows the specific caution. A CIRCLE with a diagonal line inside shows action which users are not allowed to
  • Fujitsu fi-4860C | Installation Guide - Page 12
    manual, operate by following the actual displayed screen referring to the User's Manual of the scanner application you are using. Furthermore, the screenshots in this manual are for the FUJITSU TWAIN32 scanner driver and the Image Capturing Software Utilities "ScandAll 21" for Microsoft® Windows
  • Fujitsu fi-4860C | Installation Guide - Page 13
    ■ Safety Precautions WARNING The following describes important warnings described in this manual. Do not touch the AC cable with wet hands. Do not insert or disconnect the power plug with wet hands. Doing so might cause electric
  • Fujitsu fi-4860C | Installation Guide - Page 14
    plug. Wipe off any dust from metal parts on the power plug or metal fittings with a soft, dry cloth. Accumulated dust might cause fire or electric shock. Do not install in locations subject to oil smoke, steam, humidity, and dust. Do not install the scanner in locations subject to oil smoke, steam
  • Fujitsu fi-4860C | Installation Guide - Page 15
    (water, small metal objects, liquids, etc.) get inside the scanner, immediately turn off the scanner and disconnect the power plug from the power outlet. Then contact the agent where you bought the scanner or Maintenance Service Center. Pay particular attention to this warning in households where
  • Fujitsu fi-4860C | Installation Guide - Page 16
    in this manual. Do not install the scanner on unstable surfaces. Install the scanner on a desk so that none of its parts protrude outside of the desktop. Also, make sure that the scanner is installed on a flat, level surface. Do not install the scanner on unstable surfaces. Install the scanner on
  • Fujitsu fi-4860C | Installation Guide - Page 17
    . Do not place heavy objects or climb on top of the scanner. Do not place heavy objects on the scanner or use the scanner's top surface for performing other work. Improper installation might cause injuries. Before moving the scanner, disconnect the power plug from the power outlet. Do not move
  • Fujitsu fi-4860C | Installation Guide - Page 18
    when scanner is operating as this may cause injuries. Disconnect the power plug from the power outlet when the scanner is not used for a long period of time. When the scanner is not used for a long period of time, be sure to disconnect the power plug from the power outlet for safety. Do not install
  • Fujitsu fi-4860C | Installation Guide - Page 19
    Please send your comments on this manual or on Fujitsu products to the following addresses: FUJITSU COMPUTER PRODUCTS OF AMERICA, INC. -5457 Website: http://www.fujitsu.ca/ E-mail: [email protected] (For Sales Questions) [email protected] (For technical questions) FUJITSU EUROPE LTD. Hayes Park
  • Fujitsu fi-4860C | Installation Guide - Page 20
    : (63-2)817-7576 Imaging Products Division, PFU LIMITED Solid Square East Tower, 580 Horikawacho, Saiwai-ku, Kawasaki-shi, Kanagawa 212-8563, Japan Phone: (81-44)540-4658 Fax: (81-44)540-4639 Website: http://www.pfu.fujitsu.com/e_index.html E-mail: [email protected] PFU LIMITED (Corporate
  • Fujitsu fi-4860C | Installation Guide - Page 21
    ● xx
  • Fujitsu fi-4860C | Installation Guide - Page 22
    CONNECTIONS ..... 11 Installing the Scanner 12 Connecting the Scanner 13 Installing the Scanner Driver and Application 19 Appendix-1 Messages of Operator Panel AP-1 Appendix-2 Consumables and replacement cycle ..... AP-13 Appendix-3 Troubleshooting AP-14 Appendix-4 Clearing document jams AP-16
  • Fujitsu fi-4860C | Installation Guide - Page 23
    ● xxii
  • Fujitsu fi-4860C | Installation Guide - Page 24
    1 SCANNER BASICS This chapter describes how to prepare the scanner before use. 1.1 Checking the Contents of the Scanner Package 2 1.2 Names and Functions of Parts 3 1.3 Operator Panel 6 1
  • Fujitsu fi-4860C | Installation Guide - Page 25
    the scanner from. Please handle the scanner and the accessories with care. Scanner Scanner and Accessories Power cable (x1) User Manual (CD-ROM) FUJITSU TWAIN32 FUJITSU ISIS driver Scanner driver (CD-ROM) (CD-ROM) Adobe® Acrobat® 5.0 (CD-ROM) Installation Guide (This manual) fi-XXXX
  • Fujitsu fi-4860C | Installation Guide - Page 26
    1.2 Names and Functions of Parts This section describes the names of parts and their functions. ■ Units                 1  SCANNER BASICS     1.2 Names and Functions of Parts 3
  • Fujitsu fi-4860C | Installation Guide - Page 27
    for operating the scanner. 2 Power button Used to power the scanner on/off. 3 Hopper Document input tray. 4 Side guides Used for adjusting the document width. 5 Hopper extension Used for long documents. 6 ADF (Automatic docu- Feeds documents automatically. ment feeder) 7 Pick roller unit
  • Fujitsu fi-4860C | Installation Guide - Page 28
    ■ Assemblies Lamp unit Removable glass sheetguide Lamp socket cover PAD Assy Lamp Guide plate Brake roller unit Pick roller unit Lamp Lamp socket cover SCANNER BASICS 1 1.2 Names and Functions of Parts 5
  • Fujitsu fi-4860C | Installation Guide - Page 29
    1.3 Operator Panel The operator panel is located at the Upper right hand side of the scanner. The panel consists of an LCD display (16 characters x 2 line), LEDs, and buttons. ■ Arrangement Power button 6 1.3 Operator Panel
  • Fujitsu fi-4860C | Installation Guide - Page 30
    button is pushed while the Check lamp is on or is blinking. Enter Used for setup, or test mode. SCANNER BASICS Exit Used for setup, or test mode. Returns LCD display to "Ready" status. Previous Used for setup , or test mode. Changes the setting of the selected item. 1.3 Operator Panel 7
  • Fujitsu fi-4860C | Installation Guide - Page 31
    or Double feed is detected. Press [Stop] button to clear the error, and the LED lights out. In the case of Paper jam, when the document is removed, and the Upper transport unit is closed, the LED lights out automatically. ■ Function of LCD panel LCD Function Displays the
  • Fujitsu fi-4860C | Installation Guide - Page 32
    shown bellow: Batch counter L x xxx x Re a d y xxxxxx Abrasion counter K 1 Fig.1 SCANNER BASICS Simultaneously press the both (Left) and (Right) button for at least one second, to switch .2" to "Fig.1", press the both (Left) and (Right) button for at least one second. 1.3 Operator Panel 9
  • Fujitsu fi-4860C | Installation Guide - Page 33
    documents parts replacement cycle. Refer to "Chapter7 OPERATOR PANEL MENUS of the Opelator's Guide" on page 155, included in "User Manual (CDROM)" about how to reset this counter. Keeps a cumulative count of the total number of scans made by the scanner. This counter is increased by one per sheet
  • Fujitsu fi-4860C | Installation Guide - Page 34
    how to install and connect the scanner to a PC, and how to install the Fujitsu application software. References to operating systems (OS) are indicated as follows: Windows® 95 : Microsoft® Windows® 95 operating system Windows® 98 : Microsoft® Windows® 98 operating system Windows® Me : Microsoft
  • Fujitsu fi-4860C | Installation Guide - Page 35
    for installing the scanner. ■ Cautions on placement of scanner 1. Move the scanner to the installing area. Refer to the "Operator's Guide" stored on the "User Manual (CD-ROM)" about the dimensions of the scanner, and the space required for its installation. ATTENTION Move the scanner with
  • Fujitsu fi-4860C | Installation Guide - Page 36
    -68V-68HD-LVD ADAPTEC ACK-68V-68HD-LVD-2M-ICE KOFAX Adrenaline 650i ADAPTEC ACK-LVD-CBL KIT Use of other SCSI card may cause unstable scan operations. If you use ADAPTEC SCSI card 29160/39160, make sure you install the proper drivers and updates as described below: 2.2 Connecting the Scanner 13
  • Fujitsu fi-4860C | Installation Guide - Page 37
    4.60.) You can download the driver from the following address. If you use "FUJITSU TWAIN32 Version9.x", you do not need to install the ASPI driver. For Windows®98, Windows NT®4.0, Windows®Me, Windows®2000 and Windows®XP http://www.adaptec.com/worldwide/support/drivers_by_product.html?sess=no &cat
  • Fujitsu fi-4860C | Installation Guide - Page 38
    separately. If the file address at ADAPTEC is changed, go to the HINT ADAPTEC site (http://www.adaptec.com/worldwide/homepage.html) and go to [Support]-[Downloads] to get the necessary files and update information. INSTALLATION AND CONNECTIONS 2.2 Connecting the Scanner 15
  • Fujitsu fi-4860C | Installation Guide - Page 39
    to the same ID, either change the scanner's SCSI ID or change the SCSI ID of the other SCSI device. For details on how to change the SCSI ID, refer to the "Chap- ter 7. OPERATOR PANEL MENUS of the Operator's Guide" on page 155, included in the "User manual (CD-ROM)" . 16 2.2 Connecting the
  • Fujitsu fi-4860C | Installation Guide - Page 40
    Turn on the scanner Press the side of " | " on the Main line switch. Main line switch (Back side) Power on ! 2 Then press the Power button on the Operator panel. When the power is supplied, the green LED on the Operator panel lights. Power Button INSTALLATION AND CONNECTIONS 2.2 Connecting
  • Fujitsu fi-4860C | Installation Guide - Page 41
    4. Press the power switch on your PC. 18 2.2 Connecting the Scanner
  • Fujitsu fi-4860C | Installation Guide - Page 42
    section explains about installing the FUJITSU TWAIN32 scanner driver and Image Capturing Software "ScandAll 21" (ScandAll 21) . For further details on installing the FUJITSU TWAIN32 scanner driver, refer to the Scanner Utility for Microsoft® Windows® User's Guide on the scanner driver CD-ROM. The
  • Fujitsu fi-4860C | Installation Guide - Page 43
    Install the TWAIN data source after installing the mini-driver. ATTENTION ATTENTION If a old version of FUJITSU TWAIN32 Scanner driver is installed to your PC, refer to the "Scanner Utility for Microsoft® Windows® User's Guide" of the Scanner driver (CD-ROM) to update the mini-driver. The Windows
  • Fujitsu fi-4860C | Installation Guide - Page 44
    [Next>] the select search method screen is displayed. •For Windows®98 select "Find the most suitable driver for the device being used" then click [Next>]. •For Windows®2000 select "Find the most suitable driver for the device" then click [Next>]. 2.3 Installing the Scanner Driver and Application 21
  • Fujitsu fi-4860C | Installation Guide - Page 45
    4. Insert the Scanner driver (CD-ROM) into the CD-ROM drive If automatic start has been set up, the start up screen for the HINT setup disk is displayed. Click the [Exit] button and close this screen. 22 2.3 Installing the Scanner Driver and Application
  • Fujitsu fi-4860C | Installation Guide - Page 46
    CD-ROM is the D drive). After that click [Next>]. •For Windows®2000, just check "Specify location" and then in the next screen specify "Copy source for origination file" then specify D:\Driver2 (If your CD-ROM is the D drive), then click [OK]. 2.3 Installing the Scanner Driver and Application 23
  • Fujitsu fi-4860C | Installation Guide - Page 47
    other operating systems click [Next>]. ATTENTION For Windows®2000, "Digital Signature Not Found" is displayed. Click [Yes] and continue the installation. ATTENTION For Windows®98 there is a request to insert a disc. When this happens, insert the Windows®98 CD-ROM. 24 2.3 Installing the Scanner
  • Fujitsu fi-4860C | Installation Guide - Page 48
    INSTALLATION AND CONNECTIONS 7. The following screen is displayed, Click [Finish]. 2 8. Restart the system. After restarting the system, install the TWAIN data source. 2.3 Installing the Scanner Driver and Application 25
  • Fujitsu fi-4860C | Installation Guide - Page 49
    (3) When you use Windows®98, Windows®Me, Windows®2000, Windows®XP, select Driver Installation screen for TWAIN32 V9.9. 1. Insert the Scanner Driver CD-ROM, then use the explorer to double click on D:\Driver2\Setup\install.exe (If your CD-ROM is the D drive). When automatic start has been set up,
  • Fujitsu fi-4860C | Installation Guide - Page 50
    installation. 2 When installing the "TWAIN data source", the folder named HINT [Scanner Utility for Microsoft Windows] is created in [Start]- [Programs]. Continue, installation of the Image Capturing Software "ScandAll 21". INSTALLATION AND CONNECTIONS 2.3 Installing the Scanner Driver
  • Fujitsu fi-4860C | Installation Guide - Page 51
    lights and "Ready" is display on the LCD after warm up. 2. Turn on your PC and log on Windows®. When using Windows NT®4.0, log on as an administrator. Select Installation Twain32 V8.9. 3. Insert the Scanner driver (CD-ROM) to the CD-ROM drive and/or use explorer to double click on D:\Driver1\ASPI
  • Fujitsu fi-4860C | Installation Guide - Page 52
    of the component is displayed below. •Check the installation directory. If you need to change the installation destination, click the [Change Directory] button then specify the destination. •Click the [Continue] button to start the installation. 2.3 Installing the Scanner Driver and Application 29
  • Fujitsu fi-4860C | Installation Guide - Page 53
    Component] during installation. When installing the "TWAIN data source", the folder named HINT [Scanner Utility for Microsoft Windows] is created in [Start]- [Programs]. Continuously, install the Image Capturing Software "ScandAll 21". 30 2.3 Installing the Scanner Driver and Application
  • Fujitsu fi-4860C | Installation Guide - Page 54
    "ScandAll 21" ATTENTION When using Windows NT®4.0, Windows®2000 or Windows®XP, log on as an administrator . 1. Insert the Scanner driver CD-ROM to the CD-ROM drive and use select installation under ScandAll 21 or ScandAll 21 in the [ScandAll] folder in the CD-ROM drive. When automatic start
  • Fujitsu fi-4860C | Installation Guide - Page 55
    2. Select the language you use during installation in [Choose setup Language] then click [OK]. This screen might not be displayed. 3. Click [Next>] in the following screen. 32 2.3 Installing the Scanner Driver and Application
  • Fujitsu fi-4860C | Installation Guide - Page 56
    INSTALLATION AND CONNECTIONS 4. Carefully read the License Agreement then click [Yes], if you agree. 2 5. Confirm the name of the destination folder then click [Next>]. 2.3 Installing the Scanner Driver and Application 33
  • Fujitsu fi-4860C | Installation Guide - Page 57
    6. The following screen is displayed, Click [Finish]. 34 2.3 Installing the Scanner Driver and Application
  • Fujitsu fi-4860C | Installation Guide - Page 58
    that the scanner works properly, as follows. 1. Place a document on the hopper. For details on how to load documents, refer to "fi-4860C Operator's Guide" included in the "User Manual (CD-ROM)". ATTENTION When using Windows®98, Windows®Me, Winows®2000, or Windows®XP and the documents are set
  • Fujitsu fi-4860C | Installation Guide - Page 59
    , - Select "FUJITSU fi-4860CEAdij" when using FUJITSU TWAIN32 Version 9.8. - Select "FUJITSU TWAIN32" when using FUJITSU TWAIN32 Version 8.8. Then click [Select]. ATTENTION The part of the model name 'EAdij' varies depending on options. 36 2.3 Installing the Scanner Driver and Application
  • Fujitsu fi-4860C | Installation Guide - Page 60
    scanning conditions. Then click the [Scan] button. For details on settings in the [TWAIN Driver] dialog box, refer to the "Scanner Utility for Microsoft® Windows® User's Guide" on the Scanner driver (CD-ROM). 2 INSTALLATION AND CONNECTIONS 2.3 Installing the Scanner Driver and Application 37
  • Fujitsu fi-4860C | Installation Guide - Page 61
    images are slightly different from the screen images in "fi-4860C Quick Installation Guide", follow the actual screen display for installation. Please also refer to the software operation manual and implement the installation according to the actual screens. 38 2.3 Installing the Scanner Driver
  • Fujitsu fi-4860C | Installation Guide - Page 62
    APPENDIX-1 MESSAGES OF OPERATOR PANEL ■ Massages of Scaner Operation Status changes to with progress of time, and when all become , it (Initializing) move to the following check states. (Ejecting document) (Checking sensor)
  • Fujitsu fi-4860C | Installation Guide - Page 63
    panel disappears and the Power LED lamp lights, the scanner is in Low power mode. TTENTION The scanner wake up from Low power mode by one of the following operations. Press any button (except power button) on the Operator Panel. Set the documents on the Hopper. Send the command from PC. AP
  • Fujitsu fi-4860C | Installation Guide - Page 64
    l e Feed No w Re a d i n g ! x x x x "xxxx" shows the number of Batch counter value. HINT (Waiting) HINT The following message is displayed while the scanner is waiting in the state where double feed (check in thickness) has detected. Press the button, and the double feed detection state is
  • Fujitsu fi-4860C | Installation Guide - Page 65
    of Batch counter value. HINT The following message displayed if a document is jammed in the ADF. Refer to "Operator guide" included in "User manual CD-ROM" for removing the document remained in the scanner. Pa pe r J a mx One of "1" - "8" is displayed instead of "x", depending on
  • Fujitsu fi-4860C | Installation Guide - Page 66
    . Do u b l e Feed (by length check) The following message is displayed, when the double feed is detectied by length check. Lengt h er r or The following message is displayed, when a document is not sent from the hopper to the ADF. Mi s - p i c k Check LED does not blink at Mis
  • Fujitsu fi-4860C | Installation Guide - Page 67
    is displayed, When skewed document is fed from the hopper to the ADF. I r r egul ar paper not set correctly or when there are too many documents. (When the documents are on the hopper.) Ho
  • Fujitsu fi-4860C | Installation Guide - Page 68
    displayed, when rotating the Separation roller and the Brake roller does not rotate at all. Sep ar at i on r ol l er wo r n value exceeds the setting value to display an consumables replacement message. Ab
  • Fujitsu fi-4860C | Installation Guide - Page 69
    please contact to a distributor or an nearest imaging service and support center for help. (Front messages are displayed, when the fuse of various (Toransport motor) motors (Toransport motor, Separation motor, Pick motor, Hop- per motor) goes out. Fus e Feed al ar m mo t o r
  • Fujitsu fi-4860C | Installation Guide - Page 70
    (Front side) The following message is displayed, when the fuse for the lamp for front side belows out. Fus e al ar m Fr o nt si de l a mp The following message is displayed, when the fuse for the lamp (Back side) for back side belows out. Fus e al ar m
  • Fujitsu fi-4860C | Installation Guide - Page 71
    The following message is displayed, when an error occurs in the sensor control part. Se n s o r Co n t r o l Al a r m
  • Fujitsu fi-4860C | Installation Guide - Page 72
    The following message is displayed, when an error occurs in the Power supply. P o we r suppl y er r or The following message is displayed, when an error occurs in EEPROM. A DDR ES S xxH E E P ROM Al a r m The EEPROM address where the error occurs is
  • Fujitsu fi-4860C | Installation Guide - Page 73
    MDC. MD C d o wn l o ad Er r o r The following message is displayed, when an error occurs in fi-486PRFR (Imprinter of front-side) or fi-486PRRE (Imprinter of rear-side). Pr e I mp r i n t e r Al a r m Pos t I mp r i n t e r Al a r m The following message
  • Fujitsu fi-4860C | Installation Guide - Page 74
    characters/sheet) The replacement cycle is based on the printing on Letter/A4 woodfree paper or wood containing paper documents(64g/m2). The replacement cycle may differ due to paper quality, print density or paper type. For the purchase of the consumables, please contact the FUJITSU scanner dealer
  • Fujitsu fi-4860C | Installation Guide - Page 75
    fi-4860C Operator's Guide. Document jam occurs frequently. Refer to Chapter 5.2 Troubleshooting "Synptom11" on page 135 of the fi-4860C Operator's Guide. There is a shadow on the leading edge of the scanned image. Refer to Chapter 5.2 Troubleshooting "Synptom12" on page 138 of the fi-4860C Operator
  • Fujitsu fi-4860C | Installation Guide - Page 76
    Scanner is not recognized by PC automatically. Refer to Chapter 5.2 Troubleshooting "Synptom13" on page 139 of the fi-4860C Operator's Guide. Windows® system gets unstable. Refer to Chapter 5.2 Troubleshooting "Synptom14" on page 141 of the fi-4860C Operator's Guide. AP-15
  • Fujitsu fi-4860C | Installation Guide - Page 77
    - Be careful not to get injured during jam removal. - When removing jammed documents, be careful not to get your neckties or necklaces entangled inside the scanners. - The surface of the glass sometimes becomes hot during operation. Take care not to get burned. ■ Removing jams from the hopper or
  • Fujitsu fi-4860C | Installation Guide - Page 78
    toward you, lift up the ADF upper sheet guide. ADF upper sheet guide ADF release lever 4. Remove the jammed document. TTENTION - Staples and paper clips etc. can cause document jams. - Make sure you check the document and the document transport path for obstructions before you start scanning
  • Fujitsu fi-4860C | Installation Guide - Page 79
    ADF upper sheet guide ADF release lever 3. Pull out the jammed document to the stacker. 4. Lift the Upper transport unit fully to release the safety lock and then lower the transport unit carefully. AP-18
  • Fujitsu fi-4860C | Installation Guide - Page 80
    frequently, adjust the brake force of the Brake roller using setup mode. - Double-feed - Mis-pick - Paper jam1 1. Enter into the setup mode. Please refer to the section "1.3 Basic Operations of the Operator Panel" on page 6 of the fi-4860C Operator's Guide, "Using the setup and test mode." The
  • Fujitsu fi-4860C | Installation Guide - Page 81
    -pick" or "Document jam" occurs fre- quently Thick Strong Medium Thick Less strong Increase doc- Decrease doc- ument separa- ument separa- tion force tion force Medium Medium Thin Medium (Factory default setting) Medium Easy Thin Easy If Mis-pick occurs frequently, adjust the Pick roller
  • Fujitsu fi-4860C | Installation Guide - Page 82
    Pick speed Fast (Factory default) Mid Slow Mis-pick occurs frequently. Decrease pick speed TTENTION When you set pick speed at "Mid" or "Slow", scanning speed is reduced. AP-21
  • Fujitsu fi-4860C | Installation Guide - Page 83
    AP-22
  • Fujitsu fi-4860C | Installation Guide - Page 84
    2 Accessories 2 Adobe Acrobat 5.0 2 Installation Guide 2 Power cable 2 Scanner driver 2 User Manual 2 ADF 4 Adobe Acrobat 5.0 2 Assemblies 5 Brake roller unit 5 Guide plate 5 Lamp 5 Lamp socket 5 Lamp unit 5 PAD Assy 5 Pick roller unit 5 Removable sheet guide 5 B Batch counter 10
  • Fujitsu fi-4860C | Installation Guide - Page 85
    of Parts......... 3 O Operator panel 4, 6 Operator's Guide 12 P PAD Assy 4, 5 Pick roller unit 4, 5 Power button 4 Power cable 2 Power inlet 4 Preface ix R Regulatory Information iii Removable sheet guide 5 S Safety Precautions xii ScandAll 21 19, 31 Scanner Basics 1 Scanner driver
  • Fujitsu fi-4860C | Installation Guide - Page 86
    fi-4860C Image Scanner Installation Guide P3PC-E177-02EN Date of issuance: January, 2003 Issuance responsibility: PFU LIMITED Printed in Japan • Copying of the contents of this manual in whole or in part and copying of the scanner application is forbidden under the copyright law. • The contents of
  • Fujitsu fi-4860C | Installation Guide - Page 87
    This Manual uses recycled paper.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
Installation Guide
fi-4860C Image Scanner
P3PC-E177-0
3
EN