Garmin Edge 800 Owner's Manual - Page 53
Replacing the GSC 10 Battery - replacement battery
View all Garmin Edge 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Replacing the GSC 10 Battery 1. Locate the circular battery cover ➊ on the side of the GSC 10. ➊ ➋ Appendix Note: Be careful not to damage or lose the O-ring gasket on the cover. 6. Use a coin to twist the cover clockwise back into place (arrow points to locked). After you replace the GSC 10 battery, you must pair it with the device again. 2. Use a coin to twist the cover counter-clockwise until it is loose enough to remove (arrow points to unlocked). 3. Remove the cover and the battery ➋. 4. Wait 30 seconds. 5. Insert the new battery with the positive side facing up. Edge 800 Owner's Manual 49
Edge 800 Owner’s Manual
49
Appendix
Replacing the GSC 10 Battery
1. Locate the circular battery cover
➊
on the side of the GSC 10.
➊
➋
2. Use a coin to twist the cover
counter-clockwise until it is loose
enough to remove (arrow points to
unlocked).
3. Remove the cover and the battery
➋
.
4. Wait 30 seconds.
5. Insert the new battery with the
positive side facing up.
NOTE
: Be careful not to damage
or lose the O-ring gasket on the
cover.
6. Use a coin to twist the cover
clockwise back into place (arrow
points to locked).
After you replace the GSC 10 battery,
you must pair it with the device again.