Garmin Edge 800 Quick Start Manual

Garmin Edge 800 Manual

Get Garmin Edge 800 PDF manuals and user guides View all Garmin Edge 800 manuals
Add to My Manuals
Save this manual to your list of manuals

Garmin Edge 800 manual content summary:

  • Garmin Edge 800 | Quick Start Manual - Page 1
    quick start manual EDGE® 800 TOUCHSCREEN GPS-ENABLED BIKE COMPUTER
  • Garmin Edge 800 | Quick Start Manual - Page 2
    person or organization of such changes or improvements. Visit the Garmin Web site (www.garmin.com) for current updates and supplemental information concerning the use and operation of this and other Garmin products. Garmin®, Garmin Training Center®, and Edge®, are trademarks of Garmin Ltd. or its
  • Garmin Edge 800 | Quick Start Manual - Page 3
    on the Edge (page 3). 4. Locate satellites (page 5). 5. Set up the optional heart rate monitor (page 5) and the optional GSC™ 10 (page 6). 6. Go for a ride (page 9). 7. Save your ride (page 9). 8. Get Garmin Connect™ or Garmin Training Center® software (page 9). 9. Transfer history to your computer
  • Garmin Edge 800 | Quick Start Manual - Page 4
    position the bike mount so the front of the Edge is oriented toward the sky. You can install the bike mount on the stem (shown on page 3) or the handlebars. 1. Select a secure location to mount the Edge where it does not interfere with the safe operation of your bike. 2 Edge 800 Quick Start Manual
  • Garmin Edge 800 | Quick Start Manual - Page 5
    the bike mount on the bike stem. 4. Attach the bike mount securely using the two bands ➋. 5. Align the tabs on the back of the Edge with the bike mount notches ➌. Edge 800 Quick Start Manual Releasing the Edge 1. Turn the Edge clockwise to unlock the device. 2. Lift the Edge off the mount. Turning
  • Garmin Edge 800 | Quick Start Manual - Page 6
    to configure system settings and user profile settings. • Follow the on-screen instructions to complete the initial setup. • Activate and pair the ANT+™ sensors during configuration, if your Edge included a heart rate monitor and a GSC 10: ◦◦ If you have a heart rate monitor, select Yes. For setup
  • Garmin Edge 800 | Quick Start Manual - Page 7
    the locating satellite page disappears. Putting on the Heart Rate Monitor note: If you do not have a heart rate monitor, you can skip this task. Wear the heart rate monitor directly on your skin, just below your breastplate. It should be snug enough to stay in place during your ride. Edge 800 Quick
  • Garmin Edge 800 | Quick Start Manual - Page 8
    data. When the heart rate monitor is paired, a message appears, and appears solid on the status page. Installing the GSC 10 note: If you do not have a GSC 10, you can skip this task. Both magnets must be aligned with their respective indication lines for the Edge to receive data. 1. Place the GSC 10
  • Garmin Edge 800 | Quick Start Manual - Page 9
    the crank arm using the adhesive mount and a cable tie ➍. The pedal magnet must be within 5 mm of the GSC 10. The indication line ➎ on the pedal magnet must line up with the indication line ➏ on the GSC 10. 4. Unscrew the spoke magnet ➐ from the plastic piece. ➐ ➑ ➒ Edge 800 Quick Start Manual 7
  • Garmin Edge 800 | Quick Start Manual - Page 10
    a reset. Press Reset again if you require additional passes. 10. When everything is aligned and working correctly, tighten the cable ties, the sensor arm, and the spoke magnet. When the GSC 10 is paired, a message appears, and appear solid on the status page. 8 Edge 800 Quick Start Manual
  • Garmin Edge 800 | Quick Start Manual - Page 11
    ride data. • Garmin Connect is Web-based software. • Garmin Training Center is computer software that does not require the Internet after installation. 1. Go to www.garmin.com /intosports. 2. Select your product. 3. Click Software. 4. Follow the on-screen instructions. Edge 800 Quick Start Manual
  • Garmin Edge 800 | Quick Start Manual - Page 12
    to an available USB port on your computer. 2. Pull up the weather cap ➊ from the mini-USB port ➋. ➊ ➋ 4. Open Garmin Connect (www.garminconnect.com), or open Garmin Training Center. 5. Follow the instructions included with the software. Following a Course From the Web 1. Connect the Edge to your
  • Garmin Edge 800 | Quick Start Manual - Page 13
    workout page, the elevation profile page, and the map. For a complete list of the available data fields, see the Edge 800 Owner's Manual. 1. Select MENU > > Bike Settings > Data Fields. 2. Select a page. Edge 800 Quick Start Manual 3. Select the number of data fields you want to see on the page. To
  • Garmin Edge 800 | Quick Start Manual - Page 14
    • See the Edge 800 Owner's Manual, for more information. • Go to www.garmin.com/intosports for a list of third-party ANT+ sensors that are compatible with the Edge. Owner's Manual Getting the Manuals from the Device 1. Connect the device to your computer using the USB cable (page 10). 2. Open the
  • Garmin Edge 800 | Quick Start Manual - Page 15
    .com/intosports. 2. Select your product. 3. Click Manuals. Buying Optional Accessories Go to http://buy.garmin.com, or contact your Garmin dealer for information about optional accessories and replacement parts. Registering Your Device Help us better support you by completing our online registration
  • Garmin Edge 800 | Quick Start Manual - Page 16
    For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www.garmin.com. © 2010 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd. Liberty
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
EDGE
®
800
quick start manual
TOUCHSCREEN GPS-ENABLED BIKE COMPUTER