Garmin GHP 20 Marine Autopilot System for Yamaha Helm Master Installation Inst
Garmin GHP 20 Marine Autopilot System for Yamaha Helm Master Manual
View all Garmin GHP 20 Marine Autopilot System for Yamaha Helm Master manuals
Add to My Manuals
Save this manual to your list of manuals |
Garmin GHP 20 Marine Autopilot System for Yamaha Helm Master manual content summary:
- Garmin GHP 20 Marine Autopilot System for Yamaha Helm Master | Installation Inst - Page 1
dealer or Garmin product support. Read all installation instructions before proceeding with the helm unattended. Always be prepared to promptly regain manual control of your boat. Learn to operate the . See the Important Safety and Product Information guide in the product box for product warnings and - Garmin GHP 20 Marine Autopilot System for Yamaha Helm Master | Installation Inst - Page 2
Contents GHP™ 20 Steer-by-Wire Installation Instructions...........1 Registering the Device 1 Contacting Garmin Product Support 1 Important Safety Information 1 GHP 20 Package Manually Running the Automated Configuration Procedures...........13 Manually Running the Sea Trial Wizard 13 Manually - Garmin GHP 20 Marine Autopilot System for Yamaha Helm Master | Installation Inst - Page 3
NMEA 2000-compatible devices are not available, you can connect the GHC 20 to optional NMEA 0183-compatible devices instead. Serial Number GHP 20 Installation Instructions 3 - Garmin GHP 20 Marine Autopilot System for Yamaha Helm Master | Installation Inst - Page 4
Extension Cables NMEA 2000 extension cables are available if needed. Contact your local Garmin dealer or Garmin Product Support for ordering information. Tools Needed • Safety glasses • Drill and drill bits • 3 1/2 in. must provide the correct types of screws. 4 GHP 20 Installation Instructions - Garmin GHP 20 Marine Autopilot System for Yamaha Helm Master | Installation Inst - Page 5
: There is an installation checklist on the last page of these instructions. Remove the last page and refer to the checklist as you proceed the keys on the GHC 20. • The mounting surface must be strong enough to support the weight of the GHC 20 and protect it from excessive vibration or shock. • The - Garmin GHP 20 Marine Autopilot System for Yamaha Helm Master | Installation Inst - Page 6
GHP 20 General Connection Diagram Refer to this diagram for component-interconnection reference only. Follow the detailed installation instructions for each component starting on page 7. ➊ ➋ ➌ ➍ ➎ ➐ ➏ Item Description Important Considerations ➊ GHC 20 ➋ NMEA 2000 network The GHC 20 and the - Garmin GHP 20 Marine Autopilot System for Yamaha Helm Master | Installation Inst - Page 7
cable from the CCU to the steering system. If you need to lengthen the steering controller cable, use a NMEA 2000 extension cable. GHP 20 Installation Instructions 7 - Garmin GHP 20 Marine Autopilot System for Yamaha Helm Master | Installation Inst - Page 8
plan to mount the GHC 20. The flush-mount template is included in the product box, not in these instructions. The flush-mount template has adhesive on the back. 2. Remove the protective liner from the adhesive on the information on NMEA 2000, go to www.garmin.com. 8 GHP 20 Installation Instructions - Garmin GHP 20 Marine Autopilot System for Yamaha Helm Master | Installation Inst - Page 9
enough, you can use a drop cable up to 20 ft. (6 m) long (not included). 6. Connect the drop cable to the to the CCU. GHP 20 Installation Instructions 9 - Garmin GHP 20 Marine Autopilot System for Yamaha Helm Master | Installation Inst - Page 10
0183. NMEA 0183 Connection Considerations • To identify the Transfer (Tx) A(+) and B(-) wires for your NMEA 0183-compatible device, consult the installation instructions for your device. • When connecting NMEA 0183 devices with two transmitting and two receiving lines, it is not necessary for the - Garmin GHP 20 Marine Autopilot System for Yamaha Helm Master | Installation Inst - Page 11
and select Select. 3. Correct the value. 4. Repeat steps 2 and 3 for all incorrect values. 5. When you are finished reviewing the values, select Done. GHP 20 Installation Instructions 11 - Garmin GHP 20 Marine Autopilot System for Yamaha Helm Master | Installation Inst - Page 12
line. 2. Select Begin, and continue to drive in a straight line. 3. When instructed, turn the boat slowly clockwise, taking care to make the turn as steady and an option: • If the autotune completed successfully, select Done and take manual control of the boat. • If the autotune failed, adjust the - Garmin GHP 20 Marine Autopilot System for Yamaha Helm Master | Installation Inst - Page 13
, select Menu > Setup > Dealer Autopilot Configuration > Automated Setup. 3. Select Autotune, Calibrate Compass, or Set North. 4. Follow the on-screen instructions. Manually Running the Sea Trial Wizard The Sea Trial Wizard allows you to quickly define all of the important configuration settings on - Garmin GHP 20 Marine Autopilot System for Yamaha Helm Master | Installation Inst - Page 14
a common ground. > > ➊ GHC 20 ➋ NMEA 2000 network (provides power to the GHC 20) ➌ 12 VDC power source ➍ NMEA 0183-compatible device 14 GHP 20 Installation Instructions - Garmin GHP 20 Marine Autopilot System for Yamaha Helm Master | Installation Inst - Page 15
Product Information Water Speed Position - Rapid Update COG & SOG - Rapid Update Cross Track Error Navigation Data GNSS Sats in View Wind Data GHP 20 Installation Instructions 15 - Garmin GHP 20 Marine Autopilot System for Yamaha Helm Master | Installation Inst - Page 16
Settings Although all of the configuration is typically completed automatically through the wizard, you can manually adjust any setting (page 13). NOTE: Depending upon the configuration of the autopilot, certain this setting to correct the steering direction. 16 GHP 20 Installation Instructions - Garmin GHP 20 Marine Autopilot System for Yamaha Helm Master | Installation Inst - Page 17
GHP 20. See the configuration section of the GHC 20 Owner's Manual for more information. Error and Warning Messages Error Message Cause Autopilot engage. Alarm sounds Autopilot transitions to standby Steering Controller Not Supported The steering system • Alarm sounds of the boat is not - Garmin GHP 20 Marine Autopilot System for Yamaha Helm Master | Installation Inst - Page 18
- Garmin GHP 20 Marine Autopilot System for Yamaha Helm Master | Installation Inst - Page 19
and use it to assist with the GHP 20 installation process. Read all installation instructions before installing the GHP 20. Contact Garmin Product Support if you have any questions during the installation process. 1. Refer to the diagram and notes starting on page 6 to understand the necessary - Garmin GHP 20 Marine Autopilot System for Yamaha Helm Master | Installation Inst - Page 20
must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Information in this document is subject to change without notice. Garmin reserves the right to change or improve
GHP 20 Installation Instructions
1
GHP
™
20 Steer-by-Wire Installation
Instructions
To obtain the best possible performance and to avoid damage to your
boat, install the Garmin
®
GHP 20 marine autopilot system according
to the following instructions. Professional installation of the autopilot
system is highly recommended.
This autopilot system is designed to interface with your specific type of
boat. If you are not sure that this system is designed for use with your
boat, contact your Garmin dealer or Garmin product support.
Read all installation instructions before proceeding with the
installation.
If you experience difficulty during the installation, contact
Garmin Product Support.
NOTE:
There is an installation checklist on the last page of these
instructions. Remove the last page and refer to the checklist as you
proceed through the GHP 20 installation.
Registering the Device
•
Go to
.
•
Keep the original sales receipt, or a photocopy, in a safe place.
For future reference, write the serial number assigned to each
component of your GHP 20 system in the spaces provided on
page 3
.
The serial numbers are located on a sticker on each component.
Contacting Garmin Product Support
•
Go to
www.garmin.com/support
and click
Contact Support
for in-
country support information.
•
In the USA, call (913) 397.8200 or (800) 800.1020.
•
In the UK, call 0808 2380000.
•
In Europe, call +44 (0) 870.8501241.
Important Safety Information
WARNINGS
You are responsible for the safe and prudent operation of your
vessel.
The GHP 20 is a tool that will enhance your capability to operate
your boat. It does not relieve you from the responsibility of safely
operating your boat. Avoid navigational hazards and never leave the
helm unattended.
Always be prepared to promptly regain manual control of your boat.
Learn to operate the GHP 20 on calm and hazard-free open water.
Use caution when operating the GHP 20 near hazards in the water, such
as docks, pilings, and other boats.
See the
Important Safety and Product Information
guide in the product
box for product warnings and other important information.
CAUTION
Equipment to be connected to this product should have a fire enclosure
or be provided with a fire enclosure.
Always wear safety goggles, ear protection, and a dust mask when
drilling, cutting, or sanding.
Notice
When drilling or cutting, always check the opposite side of the surface.
Be aware of fuel tanks, electrical cables, and hydraulic hoses.