Garmin GMR 624 xHD2 Open Array Radar and Pedestal Flush Mount Template

Printing a Mounting Template

Notice

It is not recommended that you print a mounting template on your own. Use the template that came in the product box.

If you do print the template, you must follow these instructions for printing a mounting template precisely. To print large templates,

you need large enough paper and printer. Failure to have the correct sized paper and printer, or a failure to follow these instructions,

may result in an incorrectly sized template and therefore an incorrect cutout (too large or too small) on the mounting surface of your

boat.

1

Select

File

>

Print

.

➋

➌

➍

➎

➊

2

Select

None

for

Page Scaling

➊

.

3

Ensure the check mark is next to

Auto-Rotate and Center

➋

.

4

Drag the arrow

➌

to the right, to view page 2 in the window below.

4

Verify that the paper size is larger than the template

➍

.

In this example, the paper is not larger than the template.

5

If the paper size is not large enough, select

Properties

➎

and select a

Page Size

that is larger than the template.

Notice

Garmin is not responsible for any damages or expenses resulting from a miscut mounting surface arising from a failure to follow

these instructions.