Garmin GPS 18 Setup Guide
Garmin GPS 18 - Deluxe USB Sensor Manual
 |
UPC - 753759042660
View all Garmin GPS 18 manuals
Add to My Manuals
Save this manual to your list of manuals |
Garmin GPS 18 manual content summary:
- Garmin GPS 18 | Setup Guide - Page 1
Navigation Software setup guide This setup guide includes instructions to connect your GPS 18 to your computer, install software on your computer, and unlock the detailed maps. To ensure a successful installation, follow the steps outlined in this guide. Do not connect the USB cable to your PC until - Garmin GPS 18 | Setup Guide - Page 2
and follow the instructions on your computer screen. Step 2: Connect the GPS 18 to Your Computer GPS 18 PC 1. Connect the 12-Volt adapter to your vehicle's 12-Volt receptacle. 2. After properly mounting the GPS 18, routing the cable to your computer, and installing nRoute software, insert the DB - Garmin GPS 18 | Setup Guide - Page 3
in USB Port of Computer 2. Once the GPS 18 USB is connected, Windows should automatically locate and install the drivers. If Windows is unable to locate and install the drivers, select your DVD-ROM drive from the "Add New Hardware" Wizard dialog box (Example: "E:"). Step 3: Install Detailed Maps - Garmin GPS 18 | Setup Guide - Page 4
For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www.garmin.com. © 2005 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U.S.A. Garmin (Europe) Ltd. Unit 5, The
-
1 -
2 -
3 -
4
 |
 |
GPS 18
with nRoute
™
Navigation Software
setup guide
This setup guide includes instructions to
connect your GPS 18 to your computer,
install software on your computer, and
unlock the detailed maps.
To ensure a successful installation, follow
the steps outlined in this guide.
Do not
connect the USB cable to your PC until
you are instructed to do so.
190-00309-02 Rev. A