Garmin GPSMAP 296 Pilot's Guide - Page 125
To have the unit automatically scan for a frequency, Text Out
View all Garmin GPSMAP 296 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
• Text Out-allows the unit to output simple text data that includes, data, time, location, and velocity. The Baud can be set to 1200, 2400, 4800, or 9600. • None-provides no interfacing capabilities. If you select GARMIN DGPS or RTCM In/NMEA Out format, you can control a differential beacon receiver directly from your GPSMAP 296 using the Com 1 or Com 2 sub tabs. You can have the unit automatically scan for the DGPS beacon signal, or you can enter the beacon frequency and bit rate on the unit, and the information is used to tune the beacon receiver. If you use a DGPS receiver, WAAS capability is automatically turned off. MAIN MENU > SETUP TAB To have the unit automatically scan for a frequency: 1. With the unit set to GARMIN DGPS or RTCM In/NMEA Out, use the ROCKER to highlight the Beacon field and press ENTER. 2. Highlight Scan, and press ENTER. The numbers in the Frequency field change as the unit scans from 284 kHz to 325 kHz, 200 bit rate, then 100, at 6-second intervals. Highlight Scan, and press ENTER Shows the status of the scan Com 2 tab of the Setup tab with GARMIN DGPS selected GPSMAP 296 Pilot's Guide 117