Garmin GPSMAP 296 Pilot's Guide - Page 142
Installation Information, Connecting the Power/Data Cable - antenna
View all Garmin GPSMAP 296 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
APPENDIX > INSTALLATION INFORMATION Installation Information This section of the Appendix provides information on connecting the GPSMAP 296 to auxiliary devices and removing the antenna. Connecting the Power/Data Cable The power/data cable connects the GPSMAP 296 to an 11-35 VDC system and provides interface capabilities for connecting external devices. The color code in the diagram below and to the right indicates the appropriate harness connections. Replacement fuse is a 3AG - 1.5 Amp fuse. Ground Black Alarm White Voice (+) Brown Data In 1 Yellow Voice (-) Orange Data Out 1 Blue Data In 2 Green Power Red Data Out 2 Violet Power/Data Connector on the GPSMAP 296 Unit 134 Data Out 1 Blue Data In 2 Green Power Red Data Out 2 Violet Voice (-) Orange Ground Black Alarm White Voice (+) Brown Data In 1 Yellow Power/Data Connector on the Cable (+) (−) 11−35 VDC Data Out 2 (Violet) (RXD) Data In 2 (Green) (TXD) Autopilot/ NMEA Device Data Out 1 (Blue) (White/Blue) (+) GSD 20 (−) Sounder Data In 1 (Yellow) (White/Blue) (Orange) Closed = ON Open = OFF switch GPSMAP 296 Pilot's Guide