Garmin GPSMAP 4012 Flush Mount Template
Garmin GPSMAP 4012 - Marine GPS Receiver Manual
 |
UPC - 753759066055
View all Garmin GPSMAP 4012 manuals
Add to My Manuals
Save this manual to your list of manuals |
Garmin GPSMAP 4012 manual content summary:
- Garmin GPSMAP 4012 | Flush Mount Template - Page 1
Printing a GPSMAP® 4000/5000 Series Flush Mount Template in Adobe Acrobat A B C Adobe Acrobat Print 11˝x17˝ paper, or you do not have 11˝x17˝ paper, you must print this template at an office services store or similar location that has the ability to print on 11˝x17˝ paper. (B) You must set the 'Page - Garmin GPSMAP 4012 | Flush Mount Template - Page 2
SCHNEIDEN SIE ENTLANG DIESER LINIE CORTE EN ESTA LÍNEA SKÆR PÅ DENNE LINJE SKJÆR LANGS DENNE STREKEN SÅGA LÄNGS MED DEN HÄR LINJEN GPSMAP® 4012/4212 Flush Mount Template Unit dimensions: 14 3/4" (375 mm) W x 9 15/32" (240.5 mm) H Dimensions de l'appareil : 375 mm x 240,5 mm (l x H) Dimensioni
-
1 -
2
 |
 |
P
RINTING
A
GPSMAP
®
4000/5000 S
ERIES
F
LUSH
M
OUNT
T
EMPLATE
IN
A
DOBE
A
CROBAT
Notes:
(A) You must print the template on 11˝x17˝ paper.This is normally selected in the ‘Printer Properties’, and will differ by manufacturer.
•
If your printer is not capable of printing on 11˝x17˝ paper, or you do not have 11˝x17˝ paper, you must print this template at an office
services store or similar location that has the ability to print on 11˝x17˝ paper.
(B)
You must set the ‘Page Scaling’ setting to ‘None’.
(C)
Select ‘Auto-Rotate and Center’ to make sure the template prints in the correct orientation.
Important Information:
•
Before cutting the mounting surface, measure the printout to make sure it printed at the correct size. Both the length and width
measurements are noted on the template.
Verify both the length and width measurements before cutting
.
•
When cutting the Flush Mount template, cut
inside the line
, then sand and/or file the mounting surface to ensure a good fit.
A
B
C
Adobe Acrobat Print Dialog Box