Garmin GPSMAP 441s Owner's Manual

Garmin GPSMAP 441s Manual

Get Garmin GPSMAP 441s PDF manuals and user guides View all Garmin GPSMAP 441s manuals
Add to My Manuals
Save this manual to your list of manuals

Garmin GPSMAP 441s manual content summary:

  • Garmin GPSMAP 441s | Owner's Manual - Page 1
    GPSMAP® 400/500 series owner's manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 2
    of such changes or improvements. Visit the Garmin Web site (www.garmin.com) for current updates and supplemental information concerning the use and operation of this and other Garmin products. Garmin®, the Garmin logo, GPSMAP®, AutoLocate®, BlueChart®, g2 Vision®, and MapSource® are trademarks of
  • Garmin GPSMAP 441s | Owner's Manual - Page 3
    6. • Using the Navigation Chart: page 8. • Changing the Chart Settings: page 12. • Navigating to a Destination: page 27 • Creating and Using Waypoints: page 29. • Configuring System Settings: page 41. • Using Sonar: page 50. • Alarms and Messages: page 71. GPSMAP 400/500 Series Owner's Manual i
  • Garmin GPSMAP 441s | Owner's Manual - Page 4
    Shortcuts i Manual Conventions i Quick Links i Declaration of Conformity (DoC iv Product Registration iv Contact Garmin iv Getting Started 1 Unit and Using Routes 30 Using Tracks 31 Using BlueChart g2 Vision 33 Navigating with a Garmin Autopilot 33 Viewing Information 34 Viewing a Compass
  • Garmin GPSMAP 441s | Owner's Manual - Page 5
    Split Frequency Screen 51 Understanding the Split Zoom Screen 51 Understanding the Temp Log Screen 52 Setting Up Sonar 52 Advanced Sonar Settings 53 Using Digital Selective Calling (DSC 55 Using the Chartplotter with a VHF Radio 55 Adding a DSC Contact 56 Viewing the DSC List 56 Receiving
  • Garmin GPSMAP 441s | Owner's Manual - Page 6
    .8200 or (800) 800.1020. In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000. In Europe, go to www.garmin.com/support and click Contact Support for in-country support information, or contact Garmin (Europe) Ltd. by phone at +44 (0) 870.8501241. iv GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 7
    Unit Overview Getting Started GPSMAP 536/546 NMEA 2000 Power/Data External GPS antenna GPSMAP 531 GPSMAP 400/500 Series Owner's Manual Getting Started POWER/ BACKLIGHT RANGE (-/+) ROCKER MARK SELECT MENU HOME SD card slot GPSMAP 546 shown 1
  • Garmin GPSMAP 441s | Owner's Manual - Page 8
    Getting Started NMEA 2000® XM antenna with audio adapter External GPS antenna Power/Data GPSMAP 530/535/540/545 External GPS antenna GXM 31 antenna Power/Data GPSMAP 430x/440x 2 GPSMAP 441/541 GPSMAP 430/431/440 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 9
    the unit, press and hold the Power key. Home Screen GPSMAP 400/500 Series Owner's Manual Getting Started Initializing Unit Settings The first time devices connected to a serial port, specify which ports are connected. AIS Receiver (is not available if you select None for NMEA Devices)-Select Yes if
  • Garmin GPSMAP 441s | Owner's Manual - Page 10
    Auto Backlight (automatic backlight is available only on the GPSMAP 535, 536, 545, and 546). To switch between Day mode and Night mode: 1. Press and release the Power key. 2. Select Color Mode. 3. Press left or right on the Rocker to switch between modes. 4 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 11
    the Keypad GPSMAP 400/500 Series Owner's Manual POWER/ BACKLIGHT RANGE (-/+) ROCKER MARK SELECT MENU HOME Getting Started POWER/BACKLIGHT-Press and hold to turn the unit on or off. Press and release to adjust the backlight and day and night modes. RANGE (-/+)-Press to adjust the range of the sonar
  • Garmin GPSMAP 441s | Owner's Manual - Page 12
    Getting Started For more information about GPS, visit the Garmin Web site at www.garmin.com/aboutGPS. Using Simulator Mode Simulator mode turns the GPS receiver off for use indoors or for practice. The unit does not track satellites in simulator mode. CAUTION: Do not try to navigate using simulator
  • Garmin GPSMAP 441s | Owner's Manual - Page 13
    return to the Home screen. • Charts-selects Navigation, Fishing, Perspective 3D, Mariner's Eye 3D, Fish Eye 3D, and Split Navigation charts. Note: Mariner's Eye 3D, Fish Eye 3D, and Fishing charts are available only if you use a BlueChart g2 Vision SD card. GPSMAP 400/500 Series Owner's Manual 7
  • Garmin GPSMAP 441s | Owner's Manual - Page 14
    Charts Your chartplotter has a worldwide map and a built-in detailed map of US inland lakes, or BlueChart g2 cartography for the USA and Bahamas shoreline. • Navigation Chart-displays all relevant navigation data available on your preloaded maps, including buoys, lights, cables, depth soundings
  • Garmin GPSMAP 441s | Owner's Manual - Page 15
    to your destination (only available while navigating). Data Bars-show or hide cruising, navigation, fishing, fuel, or sailing numbers. GPSMAP 400/500 Series Owner's Manual Using Charts Data bars • Cruising-turn the GPS Speed, GPS Heading, Depth, and GPS Position data bar on or off. Select
  • Garmin GPSMAP 441s | Owner's Manual - Page 16
    and cable areas. Navigating to a Point on the Chart 1. From the Home screen, select Charts. 2. Select Navigation Chart, Fishing Chart, or Split Navigation Chart. 3. Use the Rocker to select the point on the chart to which you want to go. 4. Press SELECT. 10 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 17
    To. 6. Select Go To (or Guide To when using a preprogrammed BlueChart g2 Vision card for Automatic Guidance). 7. Follow the colored line on the screen to the destination. To create a route to a point on the chart, see page 30. Panning the Navigation Chart Use the Rocker to move the map pointer
  • Garmin GPSMAP 441s | Owner's Manual - Page 18
    If more than one item is in the area, select Review, and then select the item. 12 Viewing Tide-Station BlueChart g2 Vision SD card. Tides/Currents-turns tides and currents on or off (page 36). Service Points-turns marine service points marine wind sensor. GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 19
    chart (page 19). The Weather feature is only available if the chartplotter is connected to a weather module and you have an XM® navigation is always up. The heading line appears vertically on the screen if shown. Wind direction indicator Compass rose GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 20
    sectors, depending on the zoom level. • Chart Borders-turns chart borders on when using a BlueChart g2 Vision SD card and you want to see what area the maps cover. • Photo Points-turns camera icons (page 21) on or off when using a BlueChart g2 Vision SD card. GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 21
    chart to view two different zoom levels of the Navigation chart at the same time. Split Navigation Chart (with a BlueChart g2 Vision card) The top half of the screen is zoomed in select MENU. Waypoints & Tracks-view, add, and configure waypoints and tracks. GPSMAP 400/500 Series Owner's Manual 15
  • Garmin GPSMAP 441s | Owner's Manual - Page 22
    Width-adjusts the width of the course line drawn when navigating. This setting also affects routes (Route To), but does not affect automatic guidance (Guide To). Using Mariner's Eye 3D A BlueChart g2 Vision SD card offers Mariner's Eye 3D, which provides a detailed three-dimensional view from above
  • Garmin GPSMAP 441s | Owner's Manual - Page 23
    -Turns hazard colors on or off. The Off setting shows the land as seen from the water. The On setting indicates shallow water and land with a color scale. Blue indicates deep water, yellow is shallow water, and red is very shallow water. GPSMAP 400/500 Series Owner's Manual Mariner's Eye 3D (Water
  • Garmin GPSMAP 441s | Owner's Manual - Page 24
    lines of the BlueChart g2 Vision cartography, Fish Eye 3D provides an underwater view of the sea floor or lake bottom. Use the Range keys to adjust the view. Note: You must have an "s" series unit (such as a GPSMAP 430s) with a connected transducer or have a connection to a Garmin sounder via CANet
  • Garmin GPSMAP 441s | Owner's Manual - Page 25
    land, sea, or both portions of the Navigation chart when using a preprogrammed BlueChart g2 Vision SD card. To enable satellite imagery: 1. While viewing the Navigation chart, press MENU. 2. Select Chart the satellite photos will cover both land and water. GPSMAP 400/500 Series Owner's Manual 19
  • Garmin GPSMAP 441s | Owner's Manual - Page 26
    are only present at closer zoom levels. If you cannot see the high-resolution images in your BlueChart g2 Vision region, either zoom in further using the Range (+) key, or set the detail level higher in and out while viewing the aerial photo on the full screen. GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 27
    The Chart/Sonar screen, like the Sonar screen, is only available when using a sonar-capable unit with a transducer attached. Use the Chart/Sonar screen to view the Navigation chart, Fishing chart, Mariner's Eye 3D, or Fish Eye 3D and sonar at the same time. GPSMAP 400/500 Series Owner's Manual 21
  • Garmin GPSMAP 441s | Owner's Manual - Page 28
    System (AIS) enables you to identify and track other vessels. 22 Lost AIS target Dangerous AIS target AIS target Tracking AIS target Lost dangerous AIS target Closest point and time of approach to dangerous target AIS Targeting on the Navigation Chart GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 29
    Dangerous target has been lost. A red X indicates that the AIS transmission from the vessel has been lost, and the chartplotter displays a message banner asking whether the vessel should continue to be can impact the calculation of the projected course line. GPSMAP 400/500 Series Owner's Manual 23
  • Garmin GPSMAP 441s | Owner's Manual - Page 30
    course over ground and heading information are provided by an activated AIS target, but rate of turn information is not provided, the Mariner's Eye 3D are available with a preprogrammed BlueChart g2 Vision data card. 1. From the Home screen, select Charts. 24 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 31
    with a preprogrammed BlueChart g2 Vision data card. 1. From the Home screen, select Charts. 2. Select Navigation Chart, Fishing Chart, Perspective 3D, or Mariner's Eye 3D. 3. Use the Rocker to select the AIS vessel. 4. Select AIS Vessel > Deactivate. GPSMAP 400/500 Series Owner's Manual 25
  • Garmin GPSMAP 441s | Owner's Manual - Page 32
    chart and Mariner's Eye 3D are available with a preprogrammed BlueChart g2 Vision data card. 1. From the Home screen, select Charts. 2. Select Navigation Chart, Fishing Chart, Perspective 3D, or Mariner's Eye 3D. 3. Select MENU > Other Vessels > AIS List. 26 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 33
    destination. You must be using a BlueChart g2 Vision SD card for this option to appear. Caution: Guide To does not ensure obstacle and bottom clearance. For safety, always resolve any discrepancies or questions before continuing navigation. Where To? Navigating to a Destination You can search for
  • Garmin GPSMAP 441s | Owner's Manual - Page 34
    Navigate To. 5. Select Go To. OR Select Guide To when using a preprogrammed BlueChart g2 Vision card to use Automatic Guidance. 6. Follow the colored location > Navigate To > Go To or Route To (or Guide To when using a preprogrammed BlueChart g2 Vision card). GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 35
    up to 1,500 waypoints (3,000 waypoints for models GPSMAP 431/441/531/541/536/546, including "s" models) with move the waypoint on the Navigation chart: 1. Select the waypoint on the Navigation chart. 2. Select Review. (The Review button is only shown when GPSMAP 400/500 Series Owner's Manual 29
  • Garmin GPSMAP 441s | Owner's Manual - Page 36
    GPSMAP 431/441/531/541/536/546, including "s" models), with up to 250 waypoints each. To create a route from your present location: 1. From the Navigation pointer ( ) to select the initial location at which you want to start the new route. If you select Use Waypoint List, select the first waypoint
  • Garmin GPSMAP 441s | Owner's Manual - Page 37
    using Automatic Guidance (when using a preprogrammed BlueChart g2 Vision card): 1. From the Navigation chart, select your destination. 2. Select Navigate To > Guide To. Your route is calculated. NOTE: > On. A trailing line on the chart indicates your track. GPSMAP 400/500 Series Owner's Manual 31
  • Garmin GPSMAP 441s | Owner's Manual - Page 38
    track log, replacing the oldest track data with new data. Record Interval-defines the frequency at which the track plot is recorded. Recording more-frequent plots is more accurate -sets the value of the interval. Track Color-sets the color of the track plot. GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 39
    on BlueChart g2 Vision-compatible Garmin GPS units. Navigating with a Garmin Autopilot When you start any type of navigation (Go To, Route To, Guide To, or Follow Track), if you are connected to a compatible Garmin autopilot, you are prompted to engage the autopilot. GPSMAP 400/500 Series Owner
  • Garmin GPSMAP 441s | Owner's Manual - Page 40
    . Viewing Numbers You can view and customize numerical data including depth, GPS information, and navigation information. You can customize the number of fields shown and the type select Information > Dashboard > Numbers. 2. Press MENU and select Configure. 34 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 41
    to show in each field. Viewing Information Viewing Trip Information From the Home screen, select Information > Dashboard > Trip. GPSMAP 400/500 Series Owner's Manual To reset the trip information, maximum speed, odometer, or all values, press MENU while viewing the trip information. Viewing
  • Garmin GPSMAP 441s | Owner's Manual - Page 42
    sensor, such as the Garmin GFS™ 10. To GPS Speed or Water Speed (using data from a speed wheel) for the fuel economy calculation. Viewing Tide-station Information Note: You must use a BlueChart g2 BlueChart g2 Vision card to view Tidestation information. 36 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 43
    the Navigation chart. GPSMAP 400/500 Series Owner's Manual Viewing merge MapSource data to your chartplotter: 1. Insert an SD card into your chartplotter to allow it to place update to the most-current version by clicking Help > Check for Software Updates, or check the Garmin Web site at www.garmin
  • Garmin GPSMAP 441s | Owner's Manual - Page 44
    data from the SD card to the chartplotter and combine it with existing user data. • Select Replace From Card to overwrite items on your chartplotter. 4. Select the file name from the list. The data is transferred from the SD card to the chartplotter. 38 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 45
    your chartplotter to the SD card. To transfer data to or from a NMEA 2000 network: 1. Connect the unit to a NMEA 2000 network. (Refer to the GPSMAP 400/500 Installation Instructions.) Only the following units are NMEA 2000 compatible: GPSMAP 441/441s GPSMAP 541/541s GPSMAP 536/536s GPSMAP 546
  • Garmin GPSMAP 441s | Owner's Manual - Page 46
    chartplotter, received from the same boat, it replaces the first call in the list. Select Options to sort calls by name, type, MMSI, distance from your boat, or the time the call was received. Select Options > Delete All to delete all the calls from the list. 40 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 47
    is applied, unless the chartplotter is turned off with the Power Key before power is lost. GPS-view GPS satellites. • Skyview-view the GPS satellite constellation. • WAAS/EGNOS-toggle WAAS (in North America) or EGNOS GPSMAP 400/500 Series Owner's Manual Configuring the Chartplotter (in Europe) on
  • Garmin GPSMAP 441s | Owner's Manual - Page 48
    Configuring the Chartplotter Note: You must be receiving NMEA sonar depth data or using a Garmin sounder module Configuring Navigation Preferences To change navigation preferences, from the Home screen, select Configure > Preferences > Navigation. Route leg. 42 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 49
    , select Configure > Preferences > Navigation > Auto Guidance > Shoreline Distance > Far. • If the turns in the Auto Guidance line are too wide, from the Home screen, select Configure > Preferences > Navigation > Auto Guidance > Shoreline Distance > Near. GPSMAP 400/500 Series Owner's Manual 43
  • Garmin GPSMAP 441s | Owner's Manual - Page 50
    input support for the DPT, MTW, and VHW sentences. • NMEA High Speed-supports the input or output of standard 0183 data for most AIS receivers. NMEA 0183 Setup-enable or disable NMEA 0183 output sentences for sounder, route, system, and Garmin NMEA settings. 44 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 51
    . 2. Select a setting (Sounder, Route, System, or Garmin). 3. Select the NMEA 0183 compatible: GPSMAP 441/441s GPSMAP 541/541s GPSMAP 536/536s GPSMAP 546 GPSMAP 430/440/530/540/535/545 (including "s" models) are CANet compatible. GPSMAP 400/500 Series Owner's Manual Configuring the Chartplotter
  • Garmin GPSMAP 441s | Owner's Manual - Page 52
    GPS location accuracy falls outside the specified value. Setting Sonar Alarms To set a sonar alarm from the Home screen, select Configure > Alarms > Sonar. Note: You must be receiving NMEA sonar depth data or using a Garmin sounder module to configure sonar 46 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 53
    Garmin XM WX weather receiver to view weather information (page 60). 1. From the Home screen, select Configure > Alarms > Weather. 2. Turn the following alarms on or off: marine, tornado, severe storm, flood, or flash flood. Setting the Total Fuel Onboard Alarm You can configure your chartplotter
  • Garmin GPSMAP 441s | Owner's Manual - Page 54
    AIS (Automatic Identification System) on or off. AIS alerts you to area traffic by providing boat IDs, position, course, and speed for boats that are within range and equipped with a transponder. For more information concerning the use of AIS, see page 22. 48 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 55
    Configure > Other Vessels > AIS Alarm. • Range-change the AIS Alarm-when On is selected, a message is displayed ("AIS: Dangerous Target") when a vessel enters the safe zone. When Off is selected, the message will not be displayed. GPSMAP 400/500 Series Owner's Manual Configuring the Chartplotter
  • Garmin GPSMAP 441s | Owner's Manual - Page 56
    the Full Screen Select the Full Screen option to view a full-screen graph of the transducer's sonar readings. From the Home screen, select Sonar > Full Screen. Depth Temperature Speed Suspended targets Transducer frequency or beam width Full Screen Range 50 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 57
    graph and a zoomed in portion on the same screen. From the Home screen, select Sonar > Split Zoom. Depth, temperature, and speed Range Frequencies Split Frequency GPSMAP 400/500 Series Owner's Manual Zoomed depth scale Zoom window Range Zoom level Transducer frequency or beam width Split Zoom 51
  • Garmin GPSMAP 441s | Owner's Manual - Page 58
    noise to help reduce clutter. Depth Line-quickly reference a specific depth (Show or Hide). To set the depth of the reference line, select Show, and then press up or down on the Rocker. A-Scope-display a vertical flasher along the right side of the screen. 52 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 59
    . Suspended targets appear as symbols with no background information shown. The target depth of each symbol is displayed. GPSMAP 400/500 Series Owner's Manual Using Sonar • Whiteline-highlights the strongest signal from the bottom to help identify its hardness or softness. ◦◦ Off (default)-turns
  • Garmin GPSMAP 441s | Owner's Manual - Page 60
    to adjust manually, Manual Range). Gain-controls the sensitivity of the sonar receiver (Auto, or to adjust manually, Manual). To see more detail, increase the gain. If the screen is cluttered, decrease the gain. Frequency-when using a dual frequency transducer, select how the frequencies appear on
  • Garmin GPSMAP 441s | Owner's Manual - Page 61
    capable, GPS position information is transmitted with DSC calls. The chartplotter can receive DSC distress and position information from the radio. The chartplotter can track the positions of vessels sending position reports. Quickly set up and send individual routine call details to your Garmin VHF
  • Garmin GPSMAP 441s | Owner's Manual - Page 62
    of the vessel, select Trail to show or hide the trail line for the vessel, and select Trail Line to change the line color. Select Clear Report to delete the call report. Select Create Waypoint to set a waypoint at the position sent with the distress call. 56 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 63
    Garmin radio, see your Garmin VHF Radio Owner's Manual. For information on activating navigation to a man-overboard location, see page 29. GPSMAP 400/500 Series Owner's Manual Using Digital Selective Calling Position Tracking When you connect your Garmin chartplotter the line color. Select Clear Report
  • Garmin GPSMAP 441s | Owner's Manual - Page 64
    chartplotter interface to set up an individual routine call. When setting up an individual routine call from your chartplotter, you can select one of the following channels on which you want to communicate. The radio transmits this request with your call. 58 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 65
    individual routine call to an AIS target: 1. While viewing a chart, use the Rocker to select an AIS target . 2. Select AIS Vessel > Call with Radio. 3. Select Send to send the information about the call to the radio. 4. On your Garmin VHF radio, select Call. GPSMAP 400/500 Series Owner's Manual 59
  • Garmin GPSMAP 441s | Owner's Manual - Page 66
    mode does not provide live weather data. Using XM WX Weather The Garmin XM receiver and antenna receives XM WX weather data and shows it on your chartplotter's Navigation chart and other screens throughout the chartplotter. The weather data for each feature comes from reputable weather data centers
  • Garmin GPSMAP 441s | Owner's Manual - Page 67
    colors. The time stamp in the upper-left corner of the screen indicates the elapsed time since the National Weather Service last updated . To view weather information on a Perspective 3D chart or a Mariner's Eye 3D chart: Press MENU > Weather Radar > On. and GPSMAP 400/500 Series Owner's Manual 61
  • Garmin GPSMAP 441s | Owner's Manual - Page 68
    animated loop of the latest updates. • Waypoints-shows or hides waypoints. Select Navigation Only to display only waypoints that are along the route being navigated. Understanding Storm Cell Information The network only detects cloud-to-ground lightning. 62 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 69
    the projected locations received from the National Hurricane marine weather warning zones. Hurricane GPSMAP 400/500 Series Owner's Manual Marine Warning Understanding County Warnings When the National Weather Service issues a weather warning for a county, the county is highlighted with the color
  • Garmin GPSMAP 441s | Owner's Manual - Page 70
    area. Moving away from a high-pressure center in any horizontal direction results in decreased pressure. Winds flow clockwise around high-pressure centers in North America. GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 71
    associated with areas of stronger winds. Pressure units are shown in Millibars (mb), Inches of Mercury (in), and Hectopascals (hPa). Understanding Water Temperature Data The Water of the screen. The temperature breaks are indicated by isotherm lines. GPSMAP 400/500 Series Owner's Manual 65
  • Garmin GPSMAP 441s | Owner's Manual - Page 72
    15 knots 20 knots 50 knots Understanding Wave Height The Wave Height feature shows wave heights. The wave heights for an area are shown in color intensities. 66 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 73
    on the Visibility feature show the forecasted change in surface visibility. From the Home screen, select Information > Weather > Visibility. GPSMAP 400/500 Series Owner's Manual To view the forecasted visibility for another time period: 1. Press right on the Rocker to select Next. The forecasted
  • Garmin GPSMAP 441s | Owner's Manual - Page 74
    Audio When a Garmin XM receiver is connected to the audio input of your boat, you can listen to XM audio channels. To display the XM audio interface while navigating: From the guide. Channel Entry-allows you to select an XM channel. Level-adjusts the volume. 68 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 75
    545s High-sensitivity, 14 parallel channel, WAAS-capable receiver. GPSMAP 431/431s GPSMAP 441/441s GPSMAP 531/531s GPSMAP 541/541s High-sensitivity, 12 parallel channel, WAAS-capable receiver. GPSMAP 536/536s GPSMAP 546/546s Update Rate: once per second GPSMAP 400/500 Series Owner's Manual 69
  • Garmin GPSMAP 441s | Owner's Manual - Page 76
    3AG - 3.0 A Sonar Power: 1 kW Transducer (1 kW transducers are supported by the GPSMAP 535s/536s/545s/546s units only), 1,000 W (RMS), 8,000 W (peak to peak); Dual Frequency, 500 W (RMS), 4,000 W (peak to peak); Dual Beam, 400 W (RMS), 3,200 W (peak to peak) 70 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 77
    Maps-data on the data card is not unlocked for the unit. Contact your dealer or Garmin Product Support. Can't Write User Card, Card May Be Full-error reading card; remove and reinsert. Contact your dealer or Garmin Product Support if the problem persists. GPSMAP 400/500 Series Owner's Manual 71
  • Garmin GPSMAP 441s | Owner's Manual - Page 78
    Received From-shows the MMSI or name associated with an MMSI. Database Error-internal problem with the unit. Contact your dealer or Garmin Product Support to have the unit serviced Below Transducer-you must enter an appropriate Keel Offset for the transducer (page GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 79
    been reached. Sonar Service Incompatible-the external sonar device you are connected to needs a software update. Sonar Timeout-there is an internal problem with the unit. Contact your dealer or Garmin Product Support to have the unit serviced. Sonar Service Lost-the external sonar device you were
  • Garmin GPSMAP 441s | Owner's Manual - Page 80
    computer: 1. Remove the SD card from the chartplotter and insert it into an SD card reader that is attached to a computer. 2. From Windows Explorer, open the Garmin\scrn folder on the SD card. 3. Copy antireflective coatings) and a clean, lint-free cloth. 74 GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 81
    2000 network installed on the boat. GPSMAP 441/441s GPSMAP 541/541s GPSMAP 536/536s GPSMAP 546/546s To connect one of these chartplotter to an existing NMEA 2000 network and to see a list of supported NMEA 2000 PGN numbers, see the GPSMAP 400/500 Series Installation Instructions. Weather Data
  • Garmin GPSMAP 441s | Owner's Manual - Page 82
    subject to Customer Agreement included with the XM Welcome Kit and available at xmradio.com. XM Radio U.S. Satellite Services available only to those at least 18 years of age in the 48 contiguous United States. XM WX is a trademark of XM Satellite Radio Inc. GPSMAP 400/500 Series Owner's Manual
  • Garmin GPSMAP 441s | Owner's Manual - Page 83
    eye 3D 18 fishing 19 mariner's eye 3D 16 navigation 8 settings 12 cleaning the unit 74 Clear User Data 37 collision alarm 26, 49 colors, hazard 17 Color Scheme 53 Communications 44 Compass 34 compass rose 12 contact information, Garmin iv GPSMAP 400/500 Series Owner's Manual course up 13 current
  • Garmin GPSMAP 441s | Owner's Manual - Page 84
    Vessels 48 P Pause Sonar 53 Perspective 3D 15 AIS 26 MARPA 26 photos 12 physical specifications 69 Points of Interest (POI) 14, 21, 33 Position Format 42 position tracking 57 Posn. Precision 45 Power/Backlight key 5 power source 70 product registration iv Proj. Heading 25 Q quick links i R radio 55
  • Garmin GPSMAP 441s | Owner's Manual - Page 85
    36 viewing information 12 Time (options) 42 tracks 18, 31 Trails 25 transducer dual frequency 54 transferring data 37, 38 Trip Odometer 35 True (north) 42 turn the unit off 3 Turn Transition 42 GPSMAP 400/500 Series Owner's Manual U unit ID number 6 units of measure 41 user data backing up 38
  • Garmin GPSMAP 441s | Owner's Manual - Page 86
  • Garmin GPSMAP 441s | Owner's Manual - Page 87
  • Garmin GPSMAP 441s | Owner's Manual - Page 88
    the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www.garmin.com. April 2011 © 2010-2011 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
GPSMAP
®
400/500 series
owner’s manual