Garmin GPSMAP 740/740s Owner's Manual - Page 36
Navigating with a Garmin Autopilot, Information, User Data, Tracks, Active Track Options, Record
View all Garmin GPSMAP 740/740s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Navigation Managing the Track Log Memory During Recording 1. From the Home screen, select Information > User Data > Tracks > Active Track Options > Record Mode. 2. Complete an action: • Select Fill to record a track log until the track memory is full. • Select Wrap to continuously record a track log, replacing the oldest track data with new data. Configuring the Recording Interval of the Track Log You can indicate the frequency at which the track plot is recorded. Recording more-frequent plots is more accurate but fills the track log faster. The Resolution interval is recommended for the most-efficient use of memory. 1. From the Home screen, select Information > User Data > Tracks > Active Track Options > Interval > Interval. 2. Complete an action: • Select Distance to record the track based on a distance between points, select Change, and enter the distance. • Select Time to record the track based on a time interval, select Change, and enter the time interval. • Select Resolution to record the track plot based on a variance from your course. Select Change to enter the maximum error allowed from the true course before recording a track point. 3. Select Done. Copying Tracks See "Chartplotter Data Management" (page 52). Deleting All Saved Waypoints, Routes, and Tracks From the Home screen, select Information > User Data > Clear User Data > All > OK. Navigating with a Garmin Autopilot When you start navigation (Go To, Route To, or Guide To), if you are connected through a National Marine Electronics Association (NMEA) 2000 network to a compatible Garmin autopilot (such as the GHP™ 10), you are prompted to engage the autopilot. 32 GPSMAP 700 Series Owner's Manual