Garmin GPSMAP 8530 Black Box Installation Instructions
Garmin GPSMAP 8530 Black Box Manual
 |
View all Garmin GPSMAP 8530 Black Box manuals
Add to My Manuals
Save this manual to your list of manuals |
Garmin GPSMAP 8530 Black Box manual content summary:
- Garmin GPSMAP 8530 Black Box | Installation Instructions - Page 1
for your boat. In addition, these instructions will cover the mounting and wiring of the primary GPSMAP 8500 device. Important Safety Information WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. When connecting - Garmin GPSMAP 8530 Black Box | Installation Instructions - Page 2
that connects to this port must also connect to the GPSMAP 8500 through the GARMIN PROCESSOR BOX port with a Garmin Marine Network cable. A third-party monitor can be connected to this port, but touchscreen input will not be supported. The GRID is a remote input device that controls the functions - Garmin GPSMAP 8530 Black Box | Installation Instructions - Page 3
cutting. 4 Using a jigsaw, cut the mounting surface along the inside of the solid line indicated on the template. 5 Place the device in the cutout to test the fit. 6 If necessary, use a file and sandpaper to refine the size of the cutout. 7 After the device fits correctly in the cutout, make - Garmin GPSMAP 8530 Black Box | Installation Instructions - Page 4
of the GMM and third-party display. Consult the instructions provided with your GMM and third-party display for information regarding power connections. 1 Route a Garmin Marine Network cable and a DVI-D cable to the primary GMM and the GPSMAP 8500. 2 Route a DVI-D cable to an additional GMM or - Garmin GPSMAP 8530 Black Box | Installation Instructions - Page 5
o-ring on the ends of the Garmin Marine Network cable. 4 Connect the Garmin Marine Network cable to the GARMIN MONITOR port on the GPSMAP 8500 and to the GARMIN PROCESSOR BOX port on the GMM. 5 Connect the DVI-D cable to the MAIN DVI-I VIDEO OUT port on the GPSMAP 8500 and to the MAIN DVI VIDEO - Garmin GPSMAP 8530 Black Box | Installation Instructions - Page 6
Description 12 Vdc power source Power cable NMEA 0183-compliant device NMEA 0183 cable Garmin Wire Function Power Power ground Data ground Receive B (-) Receive A (+) Garmin Wire Color Red Black Black Orange/white White NMEA 0183 Device Wire Function Power Power ground Data ground N/A Transmit - Garmin GPSMAP 8530 Black Box | Installation Instructions - Page 7
NMEA 0183 devices. Consult the installation instructions for your NMEA 0183-compliant device Garmin device. See the NMEA 0183 section or communication configuration section of the owner's manual provided with your Garmin Violet Violet/white Black/white Red/white Gray Pink Blue Blue/white N/A N/A - Garmin GPSMAP 8530 Black Box | Installation Instructions - Page 8
Description 12 Vdc power source Power cable NMEA 0183-compliant device NMEA 0183 cable Garmin Wire Function Power Power ground Data ground RxA (+) RxB (-) TxA (+) TxB (-) Garmin Wire Color Red Black Black White Orange/white Gray Pink NMEA 0183 Device Wire Function Power Power ground Data - Garmin GPSMAP 8530 Black Box | Installation Instructions - Page 9
Data Description 12 Vdc power source Power cable NMEA 0183-compliant device NMEA 0183 cable Garmin Wire Function Power Power ground Data ground TxA (+) TxB (-) Garmin Wire Color Red Black Black Gray Pink NMEA 0183 Device Wire Function Power Power ground Data ground RxA N/A Item À Á NMEA - Garmin GPSMAP 8530 Black Box | Installation Instructions - Page 10
ports is available only for display on the GMM or on an additional monitor connected to the same GPSMAP 8500. Composite video is not shared across the Garmin Marine Network or NMEA 2000 network. • The two DVI-I output ports are labeled MAIN DVI-I VIDEO OUT and MIRROR DVI-I VIDEO OUT. These two - Garmin GPSMAP 8530 Black Box | Installation Instructions - Page 11
WARNING terminal, and connect the black wire to the negative Garmin Marine Network The card reader is not compatible with Garmin chartplotters prior to the GPSMAP 8000 Series and GPSMAP 8500. Connect the card reader to a Garmin device on the Garmin Marine Network using a Garmin Marine Network heading - Garmin GPSMAP 8530 Black Box | Installation Instructions - Page 12
DSE Expanded digital selective calling HDG Heading, deviation, and variation HDM Heading, magnetic MWD Wind direction and 9LR UK Garmin Corporation No. 68, Zhangshu 2nd Road, Xizhi Dist. New Taipei City, 221, Taiwan (R.O.C.) Garmin®, the Garmin logo, and GPSMAP® are trademarks of Garmin Ltd.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
GPSMAP
®
8500 Installation
Instructions
The GPSMAP 8500 is a highly customizable marine navigation
and information system. These instructions will explain the
connections between the various components of the system so
you can plan and install the best system for your boat.
In addition, these instructions will cover the mounting and wiring
of the primary GPSMAP 8500 device.
Important Safety Information
WARNING
See the
Important Safety and Product Information
guide in the
product box for product warnings and other important
information.
When connecting the power cable, do not remove the in-line
fuse holder. To prevent the possibility of injury or product
damage caused by fire or overheating, the appropriate fuse
must be in place as indicated in the product specifications. In
addition, connecting the power cable without the appropriate
fuse in place will void the product warranty.
CAUTION
Always wear safety goggles, ear protection, and a dust mask
when drilling, cutting, or sanding.
NOTICE
When drilling or cutting, always check what is on the opposite
side of the surface.
Registering Your Device
Help us better support you by completing our online registration
today.
•
Go to
.
•
Keep the original sales receipt, or a photocopy, in a safe
place.
Contacting Garmin Product Support
•
Go to
www.garmin.com/support
and click
Contact Support
for in-country support information.
•
In the USA, call (913) 397.8200 or (800) 800.1020.
•
In the UK, call 0808 2380000.
•
In Europe, call +44 (0) 870.8501241.
Understanding the Components
The GPSMAP 8500 system can be set up in different ways, depending on your needs and the layout of your boat.
The GPSMAP 8500 is the brain of a GPSMAP 8500 system and it connects to other devices and GPSMAP 8500 systems on your
boat. The GPSMAP 8500 can be controlled by a connected GMM™ monitor, a connected GRID™ input device, or combination of
the two.
December 2012
190-01558-02_0A
Printed in Taiwan