Garmin GTN 650 Pilot's Guide - Page 103
Load Approach, Activate Approach, Preview
View all Garmin GTN 650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
NOTE: As an alternate means of loading an approach, the Channel ID key allows you to select the channel ID for a SBAS approach for the current destination. The channel ID for the SBAS approach is available from an approved approach chart. Foreword Getting Started If duplicate numbers are available for a channel, a list will be available Xpdr Ctrl where you may select the desired approach. Com/Nav 7. Touch the Load Approach key. The Active Flight Plan page will be displayed. The approach waypoints are placed at the FPL end of the flight plan and the unit will automatically sequence to them after the en route waypoints. Direct-To 8. Touch the Activate Approach key, which makes the active Proc leg Direct-To the IAF, or for Vector approaches to activate a leg that is an extended final approach course. You can also "activate" the selected procedure on the Procedures page, if Wpt Info the approach is not activated on this page. Map 9. Touch the Preview key. Traffic Sequence List For The Selected Transition Figure 6-20 Selected Approach Preview Approach Diagram Touch To Load Approach Terrain Weather Nearest Music Utilities System Messages Symbols Appendix Index 190-01004-03 Rev. B Garmin GTN 625/635/650 Pilot's Guide 6-9