Garmin GTN 650 Pilot's Guide - Page 259

14.1.5 Before/After Target Waypoint Foreword This setting designates whether the offset distance defines a point before you reach the target reference waypoint or after you reach the waypoint. The "After" Getting Started selection is not available for the last waypoint in a flight plan. 1. While viewing the VCALC page, touch the Before/After Xpdr Ctrl key. Com/Nav 2. Touching the Before/After key will toggle between Before FPL and After the Target Waypoint. Direct-To 14.1.6 Target Waypoint Select the waypoint in the flight plan that will be used for planning a descent. Proc When using a flight plan, the target waypoint is a reference that can be specified Wpt Info from the waypoints contained in the flight plan. By default, the last waypoint in the flight plan is selected. Map 1. While viewing the VCALC page, touch Target Waypoint. Traffic Terrain Weather Nearest Figure 14-9 Select VCALC Target Waypoint List Music 2. A list of the remaining waypoints in the flight plan will be shown. Touch the desired waypoint to select it as the Target Utilities Waypoint. System Messages Symbols Appendix Index 190-01004-03 Rev. B Garmin GTN 625/635/650 Pilot's Guide 14-7