Garmin GTN 650 Pilot's Guide - Page 268
Flight Plan Mode
View all Garmin GTN 650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 268 highlights
Foreword Getting Started Xpdr Ctrl Com/Nav FPL 9. After completing the Trip Planning selections, touch the Compute Data key to display the trip statistics. Trip Statistics Touch To Toggle Between Statistics and Data Input Figure 14-21 Utility Trip Planning Page With Computed Data (Point-To-Point Mode) Direct-To Proc Wpt Info NOTE: When Local Time is selected in the Setup-Date/Time feature, Sunrise/ Sunset calculations in the Trip Planning feature are based on the From waypoint time zone. For instance, a flight plan originating in the Pacific time zone and ending in the Central time zone would show Sunset/Sunrise times at the destination in Pacific time. This potential offset does not occur when UTC time is used. Map 14.3.2 Traffic Terrain Flight Plan Mode 1. Touch the Mode key to select Flight Plan mode, if required. Touch To Select Flight Plan Leg Weather Nearest Music Utilities Touch To Select Flight Plan From Catalog Touch To Select Departure Time Touch To Select Departure Date Touch To Select Expected Average Ground Speed Touch To Select P-to-P or Flight Plan Mode Touch To Toggle Between Statistics and Data Input System Messages Symbols 14-22 Utility Trip Planning Page Edit Input Data View (Flight Plan Mode) 2. Touch the Flight Plan key to select the flight plan. Touch To Select Flight Plan (Active FPL Shown) Appendix Index Touch To Scroll List Figure 14-23 Select Flight Plan 14-16 Garmin GTN 625/635/650 Pilot's Guide 190-01004-03 Rev. B