Garmin GTN 650 Pilot's Guide - Page 27
Database Verification and Fuel Settings
View all Garmin GTN 650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
1.4.2 Database Verification and Fuel Settings Foreword 1. When the System and Database Version page appears, check to ensure databases are current. Then, touch Continue. Getting Started Software and GPS Engine Versions Check For Any Messages Check To Ensure Required Databases Are Present And Current Touch To Continue To Home Page Xpdr Ctrl Com/Nav FPL Direct-To Figure 1-10 System Startup Pages Proc 2. When the Instrument Panel Self-Test and Fuel Setting page appears, check to ensure that the CDI/HSI outputs and Wpt Info other displayed data are correct on the external interfaced equipment. Map Start-Up Instrument Panel Test Conditions 3. Touch each of the Fuel value keys and set the appropriate Traffic values as desired. Fuel capacity is shown in either gallons or pounds as set in the Units feature of System mode. Terrain Touch To Set Current Fuel Quantity Weather Touch To Set Fuel Flow Nearest Touch To Continue Music To Home Page Figure 1-11 Instrument Panel Self-Test & Fuel Settings Page Utilities System Messages Symbols Appendix Index 190-01004-03 Rev. B Garmin GTN 625/635/650 Pilot's Guide 1-7