Garmin GTN 650 Pilot's Guide - Page 295
Nearest Airport Criteria
View all Garmin GTN 650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 295 highlights
15.4.4 Nearest Airport Criteria Foreword Nearest Airport Criteria defines the surface type and minimum runway length used when determining the 25 nearest airports to display on the Nearest Airport Getting Page. A minimum runway length and/or surface type may be entered to prevent Started airports with small runways, or runways that do not have an appropriate surface, Xpdr Ctrl from being displayed. The default settings are "0 feet (or meters)" for runway length and "any" for runway surface type. Com/Nav 1. While viewing the System Setup page, touch the Nearest Airport key. FPL Touch To Select Runway Surface Type Touch To Select Minimum Runway Length Direct-To Proc Wpt Info Figure 15-21 Select Nearest Airport Criteria 2. Touch the Runway Surface key to display the options. Touch Map the desired surface type. Traffic Touch to Select Any Runway Surface Touch to Select Hard Runway Surfaces Only Terrain Weather Nearest Touch to Select Hard or Soft Runway Surfaces Music Touch to Select Water Surfaces Only (Not Shown) Utilities Figure 15-22 Nearest Airport Runway Surface Type System 3. Touch Minimum Runway Length to display the keypad for selecting the minimum runway length. Select the desired Messages minimum runway length with the numeric keypad. A selection of "0" will allow any length. Symbols Appendix Index 190-01004-03 Rev. B Garmin GTN 625/635/650 Pilot's Guide 15-17