Garmin GTN 650 Pilot's Guide - Page 297
Crossfill
View all Garmin GTN 650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 297 highlights
15.4.6 Crossfill Dual units may be interfaced to crossfill information between the two units. This option will not be available unless dual units are configured. When Crossfill is turned on with one GTN, it is automatically turned on in the other GTN. Some items are always crossfilled regardless of the crossfill setting; others are dependent on the crossfill setting. NOTE: Upon crossfill being activated, the GTNs may take up to 10 seconds to crossfill the flight plans. The pilot must verify the flight plan in each unit prior to use. Foreword Getting Started Xpdr Ctrl Com/Nav FPL This data is always crossfilled: Direct-To • User waypoints Proc • Flight plan catalog Wpt Info • Alerts (traffic popup acknowledgement, missed approach waypoint popup acknowledgement, altitude leg popup acknowledgement) Map • External sensors (transponder status and commands, synchro heading) Traffic • System setup: - Favorite NAV frequencies Terrain - Date/Time convention Weather - Nearest airport criteria - Units (Nav angle, Distance/Speed, etc.) Nearest - Favorite COM frequencies Music - Ownship icon - CDI Scale setting Utilities - ILS CDI Capture setting This data is crossfilled only if crossfill is turned on by the pilot: • Active navigation (flight plan) System Messages Symbols Appendix Index 190-01004-03 Rev. B Garmin GTN 625/635/650 Pilot's Guide 15-19