Garmin GTN 650 Pilot's Guide - Page 320

Foreword Getting Started Xpdr Ctrl Com/Nav FPL Direct-To Proc Wpt Info Map Traffic Terrain Weather Nearest Music Utilities Message REMOTE KEY STUCK Nav remote transfer key is stuck. REMOTE KEY STUCK TAWS inhibit key is stuck. SELECT FREQUENCY Select appropriate NAV frequency for approach. SET COURSE Set course on CDI/ HSI to [current DTK]. Description The remote nav transfer (NAV RMT XFR) key/ switch has been in pressed position for at least 30 seconds. This input will now be ignored. This input is not available in all installations. The TAWS INHIBIT discrete input has been in pressed position for at least 30 seconds. This input will now be ignored. This input is not available in all installations. Correct NAV frequency is not set in the active NAV frequency for the approach procedure. The selected course on the CDI/HSI does not match the current desired track. Action Verify the NAV RMT XFR key/ switch is not stuck. Contact dealer for service if this message persists. Verify the TAWS INHIBIT key/switch is not stuck. Contact dealer for service if this message persists. Insert the correct frequency into the active navigation frequency window. Set the CDI/HIS selected course to the current desired track. System Messages Symbols Appendix Index 16-14 Garmin GTN 625/635/650 Pilot's Guide 190-01004-03 Rev. B