Garmin GTN 650 Pilot's Guide - Page 92

Foreword 5.5 Direct-To Map Waypoint A Direct-To course may be set to any waypoint selected on the Map page. The Getting Started waypoint is selected by touching an item such as an airport, VOR, or NDB or any other location. Touching the map page at any place not having an existing Xpdr Ctrl location name will create a waypoint with the name "MAPWPT." Touching the Direct-To key will automatically insert the selected waypoint as the Direct-To Com/Nav waypoint. The MAPWPT will be saved as a User Waypoint. FPL 1. On the Map page, touch the map at the location intended to be the Direct-To waypoint. Direct-To 2. Press the Direct-To key on the right side of the unit. Proc Waypoint Tab Direct-To Waypoint Name Wpt Info Map Touch To Remove The Direct-To Course Direct-To Waypoint Map Symbol Touch To Traffic Activate The Direct-To Course Terrain Figure 5-9 Touch the Map to Create a MAPWPT as the Direct-To Course Destination Weather 3. Touch the Activate key or press the small right knob to activate the selection. Nearest Music Utilities System Messages Symbols Appendix Index 5-6 Garmin GTN 625/635/650 Pilot's Guide 190-01004-03 Rev. B