Garmin GTN 650 Pilot's Guide - Page 97
Selecting a Departure
View all Garmin GTN 650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
6.2 Selecting a Departure Foreword A Departure Procedure (DP) is loaded at the departure airport in the flight plan. Only one departure can be loaded at a time in a flight plan. If a departure Getting Started is loaded when another departure is already in the active flight plan, the new departure replaces the previous departure. The route is defined by selection of a Xpdr Ctrl departure, the transition waypoint, and a runway. Com/Nav NOTE: Vector-only departures are not available in the Procedures database as the GTN 6XX cannot provide navigational guidance on vectored legs. FPL 1. Touch the PROC key on the Home page and then touch the Direct-To Departure key to display the Departure list. Proc Wpt Info Map Touch To Show Departure List Traffic Figure 6-2 Select Departure 2. If necessary, touch the Airport key and enter the departure Terrain airport. Touch the key for the desired Departure. Weather 3. Touch the key for the desired Transition. Touch To Select Desired Departure Transition Nearest Music Utilities Figure 6-3 Selecting a Departure Transition 4. Touch the key for the desired Runway, if necessary. Touch To Select Desired Departure Runway System Messages Symbols Appendix 190-01004-03 Rev. B Figure 6-4 Selecting a Departure Runway Garmin GTN 625/635/650 Pilot's Guide Index 6-3