Garmin GTN 650 Pilot's Guide - Page 99

6.3 Selecting an Arrival Foreword A Standard Terminal Arrival (STAR) can be loaded at any airport that has one published. Only one arrival can be loaded at a time in a flight plan. If an arrival Getting Started is loaded when another arrival is already in the active flight plan, the new arrival replaces the previous arrival. The route is defined by selection of an arrival, the Xpdr Ctrl transition waypoint, and a runway. Com/Nav 1. Touch the PROC key on the Home page to display the Procedures page and then touch the Arrival key to display FPL the Arrival page. Direct-To Touch To Display Arrival Page Proc Wpt Info Map Figure 6-8 Procedure Page 2. If necessary, touch the Airport key to select a new airport. Traffic Touch the Arrival key to display the Arrival list for the selected airport. Terrain Touch To Select Airport Touch To Display Arrival List For The Selected Airport Weather Nearest Music Figure 6-9 Arrival Page Utilities 3. Touch the desired Arrival from the Arrival list for the selected System airport. Messages Symbols Touch To Select Arrival Figure 6-10 Select from Arrival List Appendix Index 190-01004-03 Rev. B Garmin GTN 625/635/650 Pilot's Guide 6-5