Garmin GTX 327 GTX 327 Pilot's Guide
Garmin GTX 327 Manual
 |
View all Garmin GTX 327 manuals
Add to My Manuals
Save this manual to your list of manuals |
Garmin GTX 327 manual content summary:
- Garmin GTX 327 | GTX 327 Pilot's Guide - Page 1
GTX™ 327 Mode A/C Transponder pilot's guide - Garmin GTX 327 | GTX 327 Pilot's Guide - Page 2
document is subject to change without notice. Visit the GARMIN web site (www.garmin.com) for current updates and supplemental information concerning the operation of this and other GARMIN products. Software License Agreement BY USING THE GTX 327, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS - Garmin GTX 327 | GTX 327 Pilot's Guide - Page 3
: +44/0870.8501251 NOTE: It is the responsibility of the GTX 327 owner to obtain proper licensing before using the transponder. NOTE: The coverage expected from the GTX 327 is limited to line of sight. Low altitude or aircraft antenna shielding by the aircraft itself may result in reduced range - Garmin GTX 327 | GTX 327 Pilot's Guide - Page 4
mode may be selected in aircraft not equipped with an optional altitude encoder; however, the reply signal will not include altitude information. Any time the function ON or ALT is selected the transponder to the fourth digit. The numbers 8 and 9 are not used for code entry, only for entering - Garmin GTX 327 | GTX 327 Pilot's Guide - Page 5
Keys for Other GTX 327 Functions IDENT Pressing the IDENT key activates the Special Position Identification (SPI) Pulse for 18 seconds, identifying your transponder return from others on the air traffic controller's screen. The word IDENT will appear in the upper left corner of the display during - Garmin GTX 327 | GTX 327 Pilot's Guide - Page 6
Function Display NOTE: Transponder options are normally set at time of installation. For changes to the GTX 327 parameters, contact your Garmin authorized service center. PRESSURE ALT: Displays the altitude data supplied to the GTX 327 in feet, hundreds of feet (i.e., flight level), or meters, - Garmin GTX 327 | GTX 327 Pilot's Guide - Page 7
the timer. 5. Press CLR to reset the timer to zero. To operate the Count Down timer: 1. Press the FUNC key until COUNT DOWN is displayed. 2. Press CRSR and use the 0 - 9 keys to set the initial time. All digits must be entered (use the 0 key to enter leading zeros). 3. Press START/STOP begin to - Garmin GTX 327 | GTX 327 Pilot's Guide - Page 8
International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U.S.A. Garmin (Europe) Ltd. Liberty House, Bulls Copse Road, Hounsdown Business Park, Southampton, SO40 9RB, U.K. Garmin Corporation No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan www.garmin.com Part Number 190-00187-00 Rev. D
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
Mode A/C Transponder
pilot’s guide
GTX
™
327