Garmin echo 201 Owners Manual

Garmin echo 201 Manual

Garmin echo 201 manual content summary:

  • Garmin echo 201 | Owners Manual - Page 1
    echo™ 200, 300, and 500 Series Owner's Manual March 2014 190-01709-00_0B Printed in Taiwan
  • Garmin echo 201 | Owners Manual - Page 2
    content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current Garmin® and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. echo™ is a trademark of Garmin
  • Garmin echo 201 | Owners Manual - Page 3
    Your Device 1 Contacting Garmin Product Support 1 Manual Conventions 1 Entering Numerical Values 1 Getting Started 1 Keys 1 Turning on the Device Automatically 1 Adjusting the Backlight 1 Adjusting the Color Scheme 1 Setting the Color Mode 1 Selecting the Transducer Type 1 Adjusting the
  • Garmin echo 201 | Owners Manual - Page 4
  • Garmin echo 201 | Owners Manual - Page 5
    scheme. Setting the Color Mode For the echo 300 and 500 series devices, you can set the sonar screen color mode for day or night use. 1 Select MENU > Setup > System > Color Mode. 2 Select Day or Night. Selecting the Transducer Type Before you can select the transducer type, you must know what
  • Garmin echo 201 | Owners Manual - Page 6
    a Page 1 Select MENU > Pages. 2 Select a page. TIP: For the echo 200 and 500 series devices, you can access the pages menu quickly by selecting or from any screen. Full Screen Page You can see a full-view graph of sonar readings from a transducer on the full screen page. From the pages menu
  • Garmin echo 201 | Owners Manual - Page 7
    Sonar View NOTE: Not all models support DownVü sonar technology and transducers. NOTE: To receive DownVü scanning sonar, you need a compatible chartplotter or fishfinder and a compatible transducer. DownVü high-frequency sonar the range manually, select Manual, and bottom in auto mode only. Locking
  • Garmin echo 201 | Owners Manual - Page 8
    transducers. From the full screen page, select MENU > Setup > Sonar Setup > A-Scope > On. A-Scope À Diameter of the sonar cone at the present depth Á Sonar applies the setting to all the pages. Setting the Gain Manually 1 Select MENU > Gain > Manual. 2 Select until you begin to see noise in the
  • Garmin echo 201 | Owners Manual - Page 9
    transducer is installed at the bottom of the keel , Á measure the distance from the transducer to the water line. Enter this value in step 3 as a negative number. Sonar > Calibration > Calibrate Water Speed. 2 Follow the on-screen instructions. NOTE: You must enter the top speed as measured by
  • Garmin echo 201 | Owners Manual - Page 10
    echo 201 and 301 10 in. (250 mm) echo 500 series 15. 75 in. (400 mm) echo 101 From 10 to 20 V echo 201, 301, and From 10 to 28 V 500 series All models 1 A All models AGC/3AG - 3. 0 A echo 151 1600 ft (488 m) @ 77 kHz echo 201, 201dv . Garmin Ltd. and its subsidiaries ("Garmin")
  • Garmin echo 201 | Owners Manual - Page 11
    power 1 L language 5 O offset, keel 5 P page. See sonar pages. See sonar pausing 3 power key 1 product registration 1 Q quick adjust 1 R registering 4 views 2 zoom 2, 3 specifications 6 system information 5 T timeout 1 transducer 1-3 U units of measure 5 W water speed 5 temperature offset 5 Z zoom
  • Garmin echo 201 | Owners Manual - Page 12
    www.garmin.com/support +43 (0) 820 220230 + 32 2 672 52 54 0800 770 4960 +385 1 5508 272 +385 1 5508 0233937 +47 815 69 555 00800 4412 454 +44 2380 662 915 (+35) 1214 447 460 +386 4 27 92 500 0861 GARMIN (427 646) +27 (0)11 251 9999 +34 93 275 44 97 + 46 7744 52020 +886 2 2642-9199 ext 2
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

echo
200, 300, and 500 Series
Owner’s Manual
March 2014
190-01709-00_0B
Printed in Taiwan