Garmin echo 300c Owner's Manual - Page 17
Alarms, SettinG the ShAllow WAter And Deep WAter alArms - battery
View all Garmin echo 300c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Turning On the A-Scope From the Full Screen page (page 4), select MENU > Setup > Sonar Setup > A-Scope > On. Alarms Setting the Shallow Water and Deep Water Alarms You can set an alarm to sound when the depth is shallower or deeper than a specified value. NOTE: Alarm settings are saved when the device is turned off. 1. From any page, select MENU > Setup > Alarms. 2. Select an option: • To sound an alarm when the depth is shallower than the specified depth, select Shallow Water > On. • To sound an alarm when the depth is deeper than the specified depth, select Deep Water > On. 3. Enter the value (page i) of the alarm setting. 4. Select ENTER to accept the value. The alarm setting appears. 5. Select Done or Confirm. Setting the Battery Voltage Alarm You can set an alarm to sound when the battery reaches a specified low voltage. NOTE: Alarm settings are saved when the device is turned off. 1. From any page, select MENU > Setup > Alarms > Battery > On. echo 200, echo 300c, echo 500c, and echo 550c Owner's Manual Using the echo 2. Enter the value of the alarm setting (page i). 3. Select ENTER to accept the value. The alarm setting appears. 4. Select Done or Confirm. Setting Fish Alarms You can set an alarm to sound when the device detects a suspended target. NOTE: Alarm settings are saved when the device is turned off. 1. From any page, select MENU > Setup > Alarms > Fish. 2. Select an option: • Select to sound an alarm for all fish sizes. • Select to sound an alarm for medium and large fish only. • Select to sound an alarm for large fish only. Setting the Water Temperature Alarm If the device is connected to a temperature transducer, you can set an alarm to sound when the water temperature varies more than ± 2 °F (±.1.1 °C). NOTE: Alarm settings are saved when the device is turned off. 1. From any page, select MENU > Setup > Alarms > Water Temperature > On. 2. Enter the value of the alarm setting (page i). 3. Select ENTER to accept the value. The alarm setting appears. 4. Select Done or Confirm. 13