Garmin nuvi 50 Owner's Manual - Page 27

Changing the Fuse in the Vehicle Power Cable notice When replacing the fuse, do not lose any of the small pieces and make sure they are put back in the proper position. The vehicle power cable does not work unless it is assembled correctly. If your device does not charge in your vehicle, you may need to replace the fuse located at the tip of the vehicle adapter. 1 Unscrew the end piece. TIP: You may need to use a coin to remove the end piece. 2 Remove the end piece, the metal tip, and the fuse (glass and metal cylinder). 3 Install a 1 A fast-blow fuse. 4 Place the metal tip in the end piece. 5 Screw the end piece back into the vehicle power cable. nüvi 30/40/50 Owner's Manual Removing the Device, Cradle, and Mount Removing the Device from the Cradle 1 Press up on the tab on the top of the cradle. 2 Tilt the device forward. Removing the Cradle from the Mount 1 Turn the cradle to the right or left. 2 Apply pressure until the socket on the cradle releases the ball on the mount. Removing the Suction Cup Mount from the Windshield 1 Flip the lever on the suction cup mount toward you. 2 Pull the tab on the suction cup toward you. 23