Garmin nuvi 52LM Owner's Manual - Page 26

Changing the Fuse in the Vehicle Power Cable, Removing Suction Cup Mount from the Windshield - updates

Page 26 highlights

• Decrease the screen brightness (page 4). • Do not leave your device in direct sunlight. • Decrease the volume (page 4). Changing the Fuse in the Vehicle Power Cable notice When replacing the fuse, do not lose any of the small pieces and make sure they are put back in the proper position. The vehicle power cable does not work unless it is assembled correctly. If your device does not charge in your vehicle, you may need to replace the fuse located at the tip of the vehicle adapter. 1 Unscrew the end piece. TIP: You may need to use a coin to remove the end piece. 2 Remove the end piece, the metal tip, and the fuse (glass and metal cylinder). 22 3 Install a 1 A fast-blow fuse. 4 Place the metal tip in the end piece. 5 Screw the end piece back into the vehicle power cable. Removing Suction Cup Mount from the Windshield Removing the Suction Cup Mount from the Windshield 1 Flip the lever on the suction cup mount toward you. 2 Pull the tab on the suction cup toward you. About nüMaps Lifetime For a one-time payment, you can receive up to four map updates each year for the life of your device. For more information on nüMaps Lifetime and complete terms and conditions, Appendix

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

22
Appendix
Decrease the screen brightness (
page 4
).
Do not leave your device in direct sunlight.
Decrease the volume (
page 4
).
Changing the Fuse in the Vehicle
Power Cable
Notice
When replacing the fuse, do not lose any of the
small pieces and make sure they are put back
in the proper position. The vehicle power cable
does not work unless it is assembled correctly.
If your device does not charge in your vehicle,
you may need to replace the fuse located at the
tip of the vehicle adapter.
1
Unscrew the end piece.
TIP
: You may need to use a coin to remove
the end piece.
2
Remove the end piece, the metal tip, and the
fuse (glass and metal cylinder).
3
Install a 1 A fast-blow fuse.
4
Place the metal tip in the end piece.
5
Screw the end piece back into the vehicle
power cable.
Removing Suction Cup Mount
from the Windshield
Removing the Suction Cup Mount from
the Windshield
1
Flip the lever on the suction cup mount
toward you.
2
Pull the tab on the suction cup toward you.
About nüMaps Lifetime
For a one-time payment, you can receive up
to four map updates each year for the life of
your device. For more information on nüMaps
Lifetime
and complete terms and conditions,