Gateway 7400 Update: New System Board Retaining Bracket

Documentation Update...

New system board retaining bracket

In newer Gateway 7210 and 7400 servers, a retaining bracket

has been added to increase the stability of the system board

tray. If your system has the retaining bracket installed, (as

shown below), follow these additional instructions to remove

the system board. If it doesn’t, follow the instructions in your

7210 Server System Manual (P/N 8505945)

or

7400 Server System

Manual (P/N 8505740)

.

Removing the retaining bracket:

1

Remove the thumbscrew from the retaining bracket and

lift the bracket from the board support tray.

2

Proceed with the system board removal procedure as

outlined in the

7210 Server System Manual (P/N 8505945)

or

7400 Server System Manual (P/N 8505740)

.