Gateway M-62 Replacing the Gateway M675 Keyboard
Gateway M-62 Manual
View all Gateway M-62 manuals
Add to My Manuals
Save this manual to your list of manuals |
Gateway M-62 manual content summary:
- Gateway M-62 | Replacing the Gateway M675 Keyboard - Page 1
M675 Keyboard This package includes a replacement keyboard for your Gateway M675 notebook and these printed instructions. Tools you need You need a small Phillips screwdriver and a small flat-blade screwdriver to replace the keyboard. Preventing static electricity discharge The components inside - Gateway M-62 | Replacing the Gateway M675 Keyboard - Page 2
. For more information, see "Changing batteries" in your user guide. ■ Disconnect all peripheral devices and remove any PC Cards. Removing the keyboard To remove the keyboard: 1 Follow the instructions under "Preventing static electricity discharge" on page 1. 2 Turn position. 2 www.gateway.com - Gateway M-62 | Replacing the Gateway M675 Keyboard - Page 3
9 Slide the keyboard bezel to the right, then lift the bezel off your notebook. 10 With a small Phillips screwdriver, remove the five keyboard screws and put them in a safe place. Screws www.gateway.com 3 - Gateway M-62 | Replacing the Gateway M675 Keyboard - Page 4
cable connects to the system board. Gently lift the hinge off the cable. The cable is now free and you can remove the keyboard. 4 www.gateway.com - Gateway M-62 | Replacing the Gateway M675 Keyboard - Page 5
the white connector. Important The plug is correctly oriented if the cable is not twisted. 4 Press the black plastic hinge onto the keyboard cable. www.gateway.com 5 - Gateway M-62 | Replacing the Gateway M675 Keyboard - Page 6
8 Lay the bezel back in its channel, with the right side of the bezel hanging over the edge of the notebook by approximately 1/4 inch. 6 www.gateway.com - Gateway M-62 | Replacing the Gateway M675 Keyboard - Page 7
turn on your notebook. Safety, Regulatory, and Legal Information See your user's guide for important technical support, safety, regulatory, and legal information. © 2003 Gateway, Inc. All rights reserved. Gateway, Gateway Country, the Gateway stylized logo, and the black-and-white spot design are - Gateway M-62 | Replacing the Gateway M675 Keyboard - Page 8
MAN RPL M675 KB INST R0 11/03 8 www.gateway.com
1
www.gateway.com
Replacing the Gateway M675
Keyboard
This package includes a replacement keyboard for your Gateway M675
notebook and these printed instructions.
Tools you need
You need a small Phillips screwdriver and a small flat-blade screwdriver to
replace the keyboard.
Preventing static electricity discharge
The components inside your notebook are extremely sensitive to static
electricity, also known as
electrostatic discharge
(ESD).
Before replacing the keyboard, follow these guidelines:
■
Turn off your notebook.
■
Wear a grounding wrist strap (available at most electronics stores) and
attach it to a bare metal part of your workbench or other grounded
connection.
■
Touch a bare metal surface on your workbench or other grounded object.
Warning
ESD can permanently damage electrostatic
discharge-sensitive components in your notebook.
Prevent ESD damage by following ESD guidelines every
time you replace the keyboard.
Warning
To avoid exposure to dangerous electrical voltages and
moving parts, turn off your notebook and unplug the power
cord and modem and network cables before replacing the
keyboard.
Warning
To prevent risk of electric shock, do not insert any object
into the vent holes of the notebook.