Gateway M305 Replacing the Gateway M305 Optical Drive
Gateway M305 Manual
View all Gateway M305 manuals
Add to My Manuals
Save this manual to your list of manuals |
Gateway M305 manual content summary:
- Gateway M305 | Replacing the Gateway M305 Optical Drive - Page 1
Replacing the Gateway M305 Optical Drive This package includes an optical drive, such as a CD or DVD drive, for your Gateway M305 notebook and these printed instructions. Installing a replacement drive is a process consisting of three procedures that must be done in sequence: 1 Remove the keyboard. - Gateway M305 | Replacing the Gateway M305 Optical Drive - Page 2
Remove the battery. For more information, see "Changing batteries" in your user guide. ■ Disconnect remove the keyboard: 1 Follow the instructions under "Preventing static electricity discharge" on the bottom is facing up. 5 Remove the battery. 6 Turn your notebook over so the top is facing up. - Gateway M305 | Replacing the Gateway M305 Optical Drive - Page 3
as the bezel comes away from your notebook. Be careful not to break off the tabs found on the left end of the bezel. www.gateway.com 3 - Gateway M305 | Replacing the Gateway M305 Optical Drive - Page 4
10 With a small Phillips screwdriver, remove the four keyboard screws and put them in a safe place. Screws 4 www.gateway.com - Gateway M305 | Replacing the Gateway M305 Optical Drive - Page 5
11 Raise the back edge of the keyboard, then slowly rotate it toward you so it lies keys-down on top of your notebook. Be careful not to damage the LCD panel. www.gateway.com 5 - Gateway M305 | Replacing the Gateway M305 Optical Drive - Page 6
Replacing the optical drive To replace the optical drive: 1 Remove the screw that secures the drive to the cooling assembly and the screw that secures the drive to the system board. Screws 6 www.gateway.com - Gateway M305 | Replacing the Gateway M305 Optical Drive - Page 7
2 Slide the drive out of your notebook. 3 Insert the new drive into your notebook, then replace the two screws. www.gateway.com 7 - Gateway M305 | Replacing the Gateway M305 Optical Drive - Page 8
down until it is flat all the way across. The keyboard should easily fall into place. Be careful not to damage the LCD panel. 8 www.gateway.com - Gateway M305 | Replacing the Gateway M305 Optical Drive - Page 9
4 Replace the four keyboard screws. Screws 5 Slide the two tabs on the left end of the bezel under your notebook frame. www.gateway.com 9 - Gateway M305 | Replacing the Gateway M305 Optical Drive - Page 10
be damaged when you try to close the LCD panel. 7 Replace the battery. 8 Connect the power adapter and modem and network cables, then turn on your notebook. Technical Support See your user's guide for Gateway Technical Support information. Safety, Regulatory, and Legal Information See your user - Gateway M305 | Replacing the Gateway M305 Optical Drive - Page 11
www.gateway.com 11 - Gateway M305 | Replacing the Gateway M305 Optical Drive - Page 12
MAN RPL M305 OPTC DRV R0 8/03 12 www.gateway.com
1
www.gateway.com
Replacing the Gateway M305
Optical Drive
This package includes an optical drive, such as a CD or DVD drive, for your
Gateway M305 notebook and these printed instructions.
Installing a replacement drive is a process consisting of three procedures that
must be done in sequence:
1
Remove the keyboard.
2
Replace the drive.
3
Reinstall the keyboard.
Tools you need
You need a small Phillips and small flat-blade screwdriver to install the drive.
Preventing static electricity discharge
The components inside your notebook are extremely sensitive to static
electricity, also known as
electrostatic discharge
(ESD).
Before replacing the optical drive, follow these guidelines:
■
Turn off your notebook.
■
Wear a grounding wrist strap (available at most electronics stores) and
attach it to a bare metal part of your workbench or other grounded
connection.
Warning
ESD can permanently damage electrostatic
discharge-sensitive components in your notebook.
Prevent ESD damage by following ESD guidelines every
time you replace the optical drive.
Warning
To avoid exposure to dangerous electrical voltages and
moving parts, turn off your notebook and unplug the power
cord and modem and network cables before replacing the
optical drive.