Gateway MX6750h 8511371 - Component Replacement Manual
Gateway MX6750h Manual
 |
View all Gateway MX6750h manuals
Add to My Manuals
Save this manual to your list of manuals |
Gateway MX6750h manual content summary:
- Gateway MX6750h | 8511371 - Component Replacement Manual - Page 1
battery charge indicator does not turn blue after three hours, contact Gateway Customer Care at the Web address or telephone number shown on the label on the bottom of your notebook. Technical Support See the label on the bottom of the notebook for Customer Care Information. See your hardware guide - Gateway MX6750h | 8511371 - Component Replacement Manual - Page 2
battery charge indicator does not turn blue after three hours, contact Gateway Customer Care at the Web address or telephone number shown on the label on the bottom of your notebook. Technical Support See the label on the bottom of the notebook for Customer Care Information. See your hardware guide - Gateway MX6750h | 8511371 - Component Replacement Manual - Page 3
and remove any PC Cards. 7 Turn your notebook over so the bottom is facing up, then remove the main and optional secondary batteries. For more information, see "Changing Batteries" in your online hardware guide. 8 Remove the two hard drive bay cover screws, slide the hard drive bay cover, then - Gateway MX6750h | 8511371 - Component Replacement Manual - Page 4
Insert the batteries and turn your notebook over. 16 Connect the power adapter, modem cable, and network cable. 17 Turn on your notebook. 18 If the hard drive was sent to you from Gateway with the operating system, applications, and drivers installed, you will see the Windows startup screen. -OR- If - Gateway MX6750h | 8511371 - Component Replacement Manual - Page 5
devices connected to your notebook and remove any PC Cards. 6 Turn your notebook over so the bottom is facing up, then remove the main and optional secondary batteries. For more information, see "Changing Batteries" in your online hardware guide. Replacing the Keyboard 7 With a small Phillips - Gateway MX6750h | 8511371 - Component Replacement Manual - Page 6
the memory bay cover and wireless network bay cover. 11 Replace the keyboard screw. 12 Insert the batteries, then turn your notebook over. 13 Reconnect the optional port replicator or connect the power adapter, the modem cable, and the network cable, then turn on your notebook. Technical Support - Gateway MX6750h | 8511371 - Component Replacement Manual - Page 7
to your notebook and remove any PC Cards. 6 Turn your notebook over so the bottom is facing up, then remove the main and optional secondary batteries. For more information, see "Changing Batteries" in your online hardware guide. 7 With a small Phillips screwdriver, remove the keyboard screw and - Gateway MX6750h | 8511371 - Component Replacement Manual - Page 8
the memory bay cover, then tighten the cover screws. 14 Replace the keyboard screw. 15 Insert the batteries, then turn your notebook over. 16 Reconnect the optional port replicator. -ORConnect the power adapter, the modem cable, and the network cable. 17 Turn on your notebook. Technical Support See - Gateway MX6750h | 8511371 - Component Replacement Manual - Page 9
the AC adapter, modem cable, and network cable, if connected to your notebook. 5 Disconnect all peripheral devices connected to your notebook and remove any PC Cards. 6 Turn your notebook over so the bottom is facing up, then remove the main and optional secondary batteries. For more information - Gateway MX6750h | 8511371 - Component Replacement Manual - Page 10
batteries, then turn your notebook over. 18 Reconnect the optional port replicator. -OR- Connect the power adapter, the modem cable, and the network cable. 19 Turn on your notebook. Technical Support See the label on the bottom of the notebook for Customer Care Information. See your hardware guide
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
1
www.gateway.com
Replacing the AC Adapter
Technical Support
See the label on the bottom of the notebook for Customer
Care Information. See your hardware guide for important
safety, regulatory, and legal information.
© 2006 Gateway, Inc. All rights reserved. Gateway and
eMachines are trademarks or registered trademarks of
Gateway, Inc. in the United States and other countries.
All other brands and product names are trademarks or
registered trademarks of their respective companies.
Replacing the AC Adapter
To connect the AC adapter:
1
Connect the power cord to the AC adapter.
2
Connect the AC adapter to your notebook’s power
connector.
3
Plug the power cord into a wall outlet. The power
indicator turns on.
If the power indicator does not turn on, unplug the
adapter from your notebook, then plug it back in.
Caution
Replace the power cord if it becomes damaged.
The replacement cord must be of the same type
and voltage rating as the original cord or your
notebook may be damaged.
Warning
Do not attempt to disassemble the AC adapter.
The AC adapter has no user-replaceable or
user-serviceable parts inside. The AC adapter
has dangerous voltages that can cause serious
injury or death. Contact Gateway about returning
defective AC adapters.
Important
If the battery charge indicator does not turn blue
after three hours, contact Gateway Customer
Care at the Web address or telephone number
shown on the label on the bottom of your
notebook.
Power indicator