Gateway T-1616 8512565 - Component Replacement Manual R1

Technical Support

See the label on the bottom of the notebook for Customer Care Information. See

your

Reference Guide

for important safety, regulatory, and legal information.

© 2007 Gateway, Inc. All rights reserved. Gateway and eMachines are trademarks

or registered trademarks of Gateway, Inc. in the United States and other countries.

All other brands and product names are trademarks or registered trademarks of

their respective companies.

Replacing the AC Adapter

To connect the AC adapter:

1

Connect the power cord to the AC adapter.

2

Connect the AC adapter to your notebook’s power connector.

3

Plug the power cord into an AC power outlet. The battery charge

indicator turns on.

If the battery charge indicator does not turn on:

•

Unplug the adapter from your notebook, then plug it back in.

•

Press

F

N

+F1

to toggle the status lights on and off.

•

Make sure the power cord is firmly attached to the AC

adapter.

•

Plug the power cord into a different wall outlet.

Caution

Replace the power cord if it becomes damaged. The replacement cord

must be of the same type and voltage rating as the original cord or your

notebook may be damaged.

Warning

Do not attempt to disassemble the AC adapter. The AC adapter has

no user-replaceable or user-serviceable parts inside. The AC adapter has

dangerous voltages that can cause serious injury or death. Contact Gateway

about returning defective AC adapters.

Important

If the battery charge indicator does not turn blue after three hours,

contact Gateway Customer Care at the Web address or telephone number

shown on the label on the bottom of your notebook.

Battery charge indicator

1