GE 24993 Instruction Manual
GE 24993 Manual
UPC - 030878249935
View all GE 24993 manuals
Add to My Manuals
Save this manual to your list of manuals |
GE 24993 manual content summary:
- GE 24993 | Instruction Manual - Page 1
24993 Universal Remote Instruction Manual - GE 24993 | Instruction Manual - Page 2
/Mute Control 12 Troubleshooting 13 Congratulations on your purchase of the 24993 Universal Remote Control. The 24993 is one of the most easy to use remote controls available today. With the 24993, juggling multiple remote controls is a thing of the past! Your 24993 controls up to four devices - GE 24993 | Instruction Manual - Page 3
to 10 minutes to change the batteries in your remote without losing codes you have programmed. However, do not press any buttons until batteries are installed in the remote. If buttons are pressed without batteries in the remote, all codes will be lost. Code Setup The SETUP button is used to setup - GE 24993 | Instruction Manual - Page 4
UP/DOWN Changes the volume level of the product, normally the TV. MUTE Turns off the TV sound while the picture remains. OK Selects menu items for the device you are controlling. PREV. CH Returns to the previously selected channel. TV, DVD, etc. Selects product to be operated. EXIT Exit On-Screen - GE 24993 | Instruction Manual - Page 5
is pressed. CHANNEL Up/Down Changes the channels. INPUT For some TVs, press repeatedly to select from available viewing sources (antenna, cable box, DVR, etc.). ON-OFF Turns device On or Off. INFO button brings up DVD Display or Control Menu for Chapter/Track/ Title number, Time remaining/elapsed - GE 24993 | Instruction Manual - Page 6
descriptions may vary from your original remote descriptions. REW and FF buttons control the speed of Fast Forward and Players support all the functions described above. SAT Functions CHAN+ and CHAN- buttons perform the "Page+" and "Page-" function for on-screen Guide Menus TV/SAT function. - GE 24993 | Instruction Manual - Page 7
4. With your device on, press ON/OFF. If the device turns off, no further programming is required. Note: If some buttons do not operate your equipment, try one of the other codes for your brand. Write your codes down here for easy reference later. Device Device stored Code TV TV DVD CBL/SAT - GE 24993 | Instruction Manual - Page 8
does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following these steps. 1. Manually turn on the device (TV, DVR, etc.) to be controlled. 2. Press and hold the SETUP button until the red indicator stays on, then release - GE 24993 | Instruction Manual - Page 9
Identification Feature allows you to identify the 4-digit library code stored under your device key. For example, if you want to find out what 4-digit code is stored under your TV device key, follow the six steps below: 1. Press and hold the SETUP button until the red indicator stays on. Release - GE 24993 | Instruction Manual - Page 10
both parts of the Combo device. For example, if you have a TV/ DVD Combo, you might need to set up one code under the TV button to control the TV part AND a separate code (under any other Mode button) to control the DVD part. DVR/DVD Punch-Through This remote allows the 6 DVR transport buttons - GE 24993 | Instruction Manual - Page 11
Volume/Mute buttons. The remote is initially set for all device Modes to use their own Volume/Mute control if present. If the programmed code has no Volume/Mute operation of its own then those buttons will punch-through control to the TV Mode device without needing to change to TV Mode. Setting ALL - GE 24993 | Instruction Manual - Page 12
Your Remote, cont. Setting any Mode to use its own Volume/Mute Control This routine can set any Mode to use only its own Volume/Mute control. Note off, then release the button. 3. Press and release the desired Mode button (TV, DVR, etc.), the red indicator blinks then stays on. 4. Press and release - GE 24993 | Instruction Manual - Page 13
Troubleshooting Remote does not operate your product. • Press the mode button of the product you want to control. • Program the remote with a new code. • Install new batteries. (You might have to reprogram your remote after installing new batteries.) • Remote may not be compatible with your product. - GE 24993 | Instruction Manual - Page 14
Notes 14 - GE 24993 | Instruction Manual - Page 15
90 Day Limited Warranty Jasco Products Company warrants this product to be free from manufacturing defects for a period of ninety days from the original date of consumer purchase. This warranty is limited to the repair or replacement of this product only and does not extend to consequential or - GE 24993 | Instruction Manual - Page 16
24993 Universal Remote Instruction Manual Jasco Products Company 10 E. Memorial Road Oklahoma City, OK 73114-2205 Made in China 24993-2/09
Universal Remote
Instruction Manual
24993