GE 60-924-3-01 Installation Instructions

1

,QVWDOODWLRQ±,QVWUXFWLRQV

*(±6HFXULW\

'

Product

Summary

The wall-mounted wireless Dialog QS1500 Touchtalk Interactive Keypad combines a conven-

tional Learn Mode

™

keypad with an RF receiver, speech chip, and voice amplification circuit for

your Simon 3

®

security system.

The QS1500 Touchtalk Interactive Keypad is an alkaline battery-powered, wireless keypad

designed to provide users a convenient option for the following system operations:

•

Arm the system (doors, windows, and motion sensors).

•

Arm the system with No Entry Delay.

•

Disarm the system.

•

Activate a panic alarm to call the central monitoring station in a non-medical emergency.

•

Check system status.

•

Turn system controlled lights on or off (all or individual).

•

Enables the user to hear the voice feedback that is heard at the Simon 3 Control Panel.

The keypad has two operating modes: key and chime.

In key mode, voice feedback is heard only at the keypad when a system command is entered.

Examples of this would be: system status, arming and disarming. In this mode the keypad does

not repeat siren sounds and will not make any alarm sounds or status beeps. This feature extends

battery life to the keypad and gives feedback only to the user who needs it. When the keypad is

in key mode it is compatible with Simon 3 panels version 3.3 and newer.

In chime mode, all voice feedback that is heard in key mode, plus, trouble beeps, entry/exit

beeps and alarm sounds (Fire, Aux, Police) are heard at the keypad. The keypad will also

respond to panel broadcast messages at multiple keypads. While in chime mode the keypad can

be supervised and will send supervision messages to the panel. In chime mode the keypad is

compatible with Simon 3 panels version 4.0 and newer

Voice feedback depends on how Simon 3 panel options 41 and 87 are set. See the

Simon 3 Instal-

lation Instructions (466-1873)

for more information.

Voice feedback is heard at all keypads. If the keypad is talking, the panel is silent. When the

panel is talking, the keypad is silent.

The keypad has no tamper detection. A low battery condition is automatically detected by the

keypad and communicated to the control panel.

Installation

Installation of the QS1500 Touchtalk Interactive Keypad includes guidelines for installing, pro-

gramming, sensor testing, improving sensor communication and mounting the keypad.

Installation Guidelines

Use the following guidelines when adding this keypad to your Simon 3 system:

•

Program the keypad as key or chime mode.

•

Keypads are learned into the control panel as sensors.

Part No. 60-924-3-01

The keypad has limited audio power. Therefore, the keypad should not be relied on for

alarm announcements and is no substitute for an alarm siren.

!

'RFXPHQW±1XPEHU²±³´´µ¶·¸¹±5HYº±%

6HSWHPEHU±¶¸¸³