GE AP950PI Installation Instructions
GE AP950PI - Security High-Security PIR Motion Sensor Manual
 |
UPC - 046188093946
View all GE AP950PI manuals
Add to My Manuals
Save this manual to your list of manuals |
GE AP950PI manual content summary:
- GE AP950PI | Installation Instructions - Page 1
, Mode, and LED. Figure 2. Detection pattern Description The AP950PI is a passive infrared motion detector that is highly sensitive to moving infrared sources. It features superior immunity to RFI, vibration, static electricity, temperature changes, and other false alarm sources. The unit provides - GE AP950PI | Installation Instructions - Page 2
the end of the housing because the mirror may be scratched. See Figure 3. 2 A B 9 1 8 2 7 3 6 5 4 Figure 5. Adhesive labels 7.9 ft (2.4m) 5.0 ft (1.5m) Figure 6. Cardboard undercrawl window mask AP950PI PIR Detector - GE AP950PI | Installation Instructions - Page 3
can be uncovered to place the unit in Standard Curtain Mode. Note Operation of the AP950PI in the Standard Curtain Mode is UL 639 Listed for a range of 35 feet ( ft. (1.1m) Note The LED only lights if an alarm occurs and the jumper is covering both pins. AP950PI PIR Detector Figure 7. Pet Alley 3 - GE AP950PI | Installation Instructions - Page 4
) standard mirror included 12345 SW Leveton Drive Tualatin, OR 97062 www.interlogixsecurity.com www.sentrol.com © 2002 GE Interlogix, Inc. 4 Phone: 503-692-4052 USA & Canada: 800-547-2556 Technical Service: 800-648-7424 FaxBack: 800-483-2495 GE Interlogix 1037263 Rev B 06/02 AP950PI PIR Detector
-
1 -
2 -
3 -
4
 |
 |
1
AP950PI PIR Detector
AP950PI PIR Detector
AP950PI PIR Detector
AP950PI PIR Detector
AP950PI PIR Detector
AP950PI
PIR Detector
Installation Instructions
Description
The AP950PI is a passive infrared motion detector that is highly
sensitive to moving infrared sources. It features superior
immunity to RFI, vibration, static electricity, temperature
changes, and other false alarm sources.
The unit provides jumper-selectable sensitivity, mode, and LED
settings. The unit is designed to accept either the pet immune or
the standard mirror. The masks included allow the coverage
pattern to be modified for a wide variety of applications.
Parts
The following parts are included:
•
PIR detector with pet immune mirror installed
•
Standard mirror
•
Two plastic masks
•
Sheet of adhesive masking labels
•
Cardboard undercrawl window mask
•
One screw to secure the housings
Figure 2. Detection pattern
Selecting a Location
•
The unit can be mounted from 7 to 10 feet (2.1 to 3.0m) high
except for pet alley application (see
Pet Alley Application)
, but
for optimum detection and pet immunity, mount the unit
between 7 and 8 feet (2.1 and 2.4m) high.
•
Mount the unit on a rigid vibration-free surface.
•
Mount the unit so the expected movement of an intruder is
across the fields of the detection pattern. See Figure 2.
•
Do not locate the unit on a surface exposed to moisture.
•
Do not locate the unit where it may be exposed to false alarm
sources, such as:
- direct sunlight
- heat sources (heaters, radiators, etc.) in the field of view
- strong air drafts (fans, air conditioners, etc.) on unit
•
Do not locate the unit where the ambient temperature is below
0° F (-18°C) or above 122°F (50°C).
•
Do not aim the unit at windows or glass doors.
CAUTION
You must be free of static electricity before handling sensor
circuit boards. Touch a grounded, bare metal surface before
touching circuit boards or wear a grounding strap.
Figure 1. Exploded view
Note
The maximum range is 35 feet (10.7m) with pet immune mirror
and Standard Sensitivity selected. The maximum range is 50
feet (15.2m) with standard mirror and Increased Sensitivity
selected. See
Setting the Sensitivity, Mode, and LED.
U
L
¤
C
LISTED
US
10.0 ft.(3.0m) maximum
8.0 ft.(2.4m) typical
7.0 ft. (2.1m) minimum
8 ft. (2.4m)
25 ft. (7.6m)
35 ft. (10.7m)
35 ft. (10.7m)
Hinge tabs
Front housing
LED
Window
Cable entry knockout
Corner mounting knockout
Corner mounting knockout
Flat wall mounting
knockout
Back housing
Flat wall mounting knockout
Slot for opening tab
Note: This knockout
is not for use with the
AP950PI