GE CSB9120SJSS Quick Specs
GE CSB9120SJSS Manual
 |
View all GE CSB9120SJSS manuals
Add to My Manuals
Save this manual to your list of manuals |
GE CSB9120SJSS manual content summary:
- GE CSB9120SJSS | Quick Specs - Page 1
installed adjacent to wall ovens must have an adhesion spec of INSTALLATION INFORMATION: Before installing, consult installation instructions packed with product for current dimensional data. 19-1/8" 2299--33//44"" 21-1/2" To back of Control Conduit (46" long) A B Suitable bracing to support - GE CSB9120SJSS | Quick Specs - Page 2
cutouts may be required. Check to be sure the oven supports above the Warming Drawer location do not obstruct the required interior depth and height. See Warming Drawer installation instructions for details. INSTALLATION OVER A GE/ MONOGRAM OVEN AND WARMING DWRarAmiWng DEraRw:er: Construct Solid - GE CSB9120SJSS | Quick Specs - Page 3
CSB9120SJ GE Café™ Series 30" Single Wall Oven with Advantium® Technology FEATURES AND BENEFITS • S instructions for up to 30 different recipes • A llows for use with JX2200/2201 storage drawer • U nder-the-counter installation flexibility • Model CSB9120SJSS - Stainless steel CSB9120SJSS
-
1 -
2 -
3
 |
 |
Listed by
Underwriters
Laboratories
CSB9120SJ
GE Café
™
Series 30" Single Wall Oven with Advantium
®
Technology
Specification Created 5/15
bs.)
2x4’s or
equivalent
solid floor
4-3/16"
25-1/8"
Cutout width
Junction
box location
17-1/2"
Cutout height
29-3/4"
19-1/8"
21-1/2"
Back of Control
Conduit
(48-1/2"
long)
B
30"
5" min.from
floor 1" min.
above toekick
A= Allow 1" overlap of oven over bottom edge of cutout, and allow
1-1/4" overlap at top edge of cutout.
B= Allow 11/16"-3/4" for overlap of oven over side edges of cutout.
Construct Solid
Bottom Min.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
A
Note:
Cabinets installed adjacent
to wall ovens must have an adhesion
spec of at least 194° F temperature rating.
23-1/2"
Cutout depth
NOTE:
Cabinets
installed adjacent
to wall ovens must
have an adhesion
spec of at least a
194°F temperature
rating.
NOTE:
2" minimum
between cutouts
when installed
above warming
drawer or single
wall oven.
INSTALLATION
INFORMATION:
Before installing,
consult
installation
instructions packed
with product for current
dimensional data.
ADVANTIUM WALL OVEN/GE CAFÉ
™
SERIES COOKING
TOWER DIMENSIONS AND CABINET INSTALLATION
INFORMATION (IN INCHES)
C
L
(Must support 130 lbs.)
2x4’s or
equivalent
solid floor
Suitable
bracing
to support
runners
21-5/8"
over centerline
of cabinet
1
1" Min. above toekick or adjust
to oven installation height
2" MIN between cutouts
2-1/2" MIN between cutouts
recommended—2" MIN required
9-1/4" cutout height
28-1/2" cutout width
Junction box location
A
B
A
B
Construct Solid Bottom
MIN 3/8" Plywood Supported by
2 x 4 or 1 x 2 Runners, all Four Sides.
(Must Support 150 lbs. for Advantium)
(Must Support 200 lbs. for Wall Oven)
4-3/16"
Conduit
(46" long)
Cabinet width
21-1/2"
To back
of Control
19-1/8"
29-3/4"
29-3/4"
NOTE:
Advantium wallovens can be installed below GE/GE Profile Series non-
downdraft gas and electric cooktops. It CANNOT be installed below induction or
Monogram (2GU3841385) gas cooktops.
NOTE:
Advantium wall oven comes with two lower trim pieces. One is for use
above 36-inch height installations and one is for use below 36-inch installations.
Use of the accessory drawer will replace the bottom trim piece for applicable
installations. Please see installation instructions for full details.