GE GTDS560GFWS Quick Specs
GE GTDS560GFWS Manual
 |
View all GE GTDS560GFWS manuals
Add to My Manuals
Save this manual to your list of manuals |
GE GTDS560GFWS manual content summary:
- GE GTDS560GFWS | Quick Specs - Page 1
fuse is required. Gas Dryer Electric Rating: 120V, 60Hz, 6A Gas (BTU/HR): 22,000. Factory-equipped for natural gas. Tested for LP gas. LP gas supply requires a conversion kit. Check installation instructions for correct kit and have a qualified gas technician install a conversion kit. See - GE GTDS560GFWS | Quick Specs - Page 2
other fuel-burning appliance shall be installed in the same closet with a gas dryer. Bathroom or Bedroom Installation: • The dryer MUST be exhausted to the outdoors. • The installation must conform with the local codes, or in the absence of local codes, with the National Electric Code and National - GE GTDS560GFWS | Quick Specs - Page 3
GTDS560GF GE® 7.0 cu. ft. stainless steel capacity gas dryer with Steam & HE Sensor Dry Features and Benefits • Steam Refresh - Rejuvenate lightly worn clothes by getting rid of option that reduces temperatures on select cycles • Model GTDS560GFWS -White GTDS560EFWS Specification Revised 4/13 370152
-
1 -
2 -
3
 |
 |
For answers to your Monogram,
®
Cafe
™
Series,
Profile
™
Series or GE
®
appliance questions, visit
our website at geappliances.com or call
GE Answer Center
®
service, 800.626.2000.
370152
GTDS560GF
GE
®
7.0 cu. ft. stainless steel capacity gas dryer with Steam & HE Sensor Dry
36
42
27
2
3-1/2
2-1/2
25-1/2*
Side View
Rear View
8-1/2
28-1/4
23-1/2
11-1/2
*24-1/2" from the edge of the side panel to the front.
25-1/2" from front to edge of endcaps.
5
Back View
Power
Cord Hole
4-1/2
Power Cord Locations
Exhaust Option:
When viewed from the front
of the unit, exhaust 3-way via rear, left and
bottom. Dryer is shipped exhausted to the
rear. Alternate exhausting knockouts are
supplied.
Gas:
An individual, properly-grounded
branch circuit, with a three-prong grounding-
type receptacle, protected by a 15 or 20
amp circuit breaker or a time-delay fuse is
required.
Gas Dryer Electric Rating:
120V, 60Hz, 6A
Gas (BTU/HR):
22,000. Factory-equipped for
natural gas. Tested for LP gas. LP gas supply
requires a conversion kit. Check installation
instructions for correct kit and have a
qualified gas technician install a conversion
kit. See dryer ducting information for proper
installation.
Note:
Dryer wall outlet must be located within
36" of service cord entry and accessible when
dryer is mounted in position.
Installation Information:
For complete
information, see installation instructions
packed with your dryer.
Dimensions and Installation Information (in inches)
Specification Revised 4/13