GE JBP35SDSS Quick Specs
GE JBP35SDSS Manual
 |
View all GE JBP35SDSS manuals
Add to My Manuals
Save this manual to your list of manuals |
GE JBP35SDSS manual content summary:
- GE JBP35SDSS | Quick Specs - Page 1
locations allow range to be installed directly against wall. Note: 30" ranges conform to instructions packed with product for current dimensional data. For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service - GE JBP35SDSS | Quick Specs - Page 2
JBP35SD GE® 30" Free-Standing Electric Range Features and Benefits • Self-clean oven - Conveniently cleans the oven Removable full-width storage drawer - Store cookware or kitchen accessories • Model JBP35SDSS - Stainless steel (Stainless steel door and control panel /black cooktop) Specification
-
1 -
2
 |
 |
Dimensions and Installation Information (in inches)
For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
geappliances.com or call GE Answer Center
®
service, 800.626.2000.
Listed by
Underwriters
Laboratories
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
Specification Revised 6/12
321537
KW Rating
240V
12.9
208V
9.7
Breaker Size
40 Amps
†
30
25
29-7/8
46-7/8
2-1/2
7-1/2
25-3/8
47-5/8
2-1/2
Acceptable electrical
outlet area
Dimension from wall to
closed oven door hand
Dimension from wall to front of closed door handle is 27-3/4".
JBP35SD
GE
®
30" Free-Standing Electric Range
†
Note:
Check local codes for required breaker size.
Effective January 1, 1996, the National Electrical
Code requires that new construction (not existing)
utilize a 4-conductor connection to an electric range.
Receptacle Locations:
Locally approved flexible
service cord or conduit must be used because
terminals are not accessible after range installation.
See shaded area in drawing for location of electrical
outlet box. Recommended outlet locations allow
range to be installed directly against wall.
Note:
30" ranges conform to U.L. requirements for
0" spacing from adjacent walls above and below
countertops. To reduce possibility of scorching walls,
engineering recommends a minimum of 1-1/2"
spacing to allow for possible extended, high-heat,
no-load heating element operation.
Installation information:
Before installing, consult
installation instructions packed with product for
current dimensional data.