GE JNM7196SKSS Quick Specs

GE JNM7196SKSS Manual

GE JNM7196SKSS manual content summary:

  • GE JNM7196SKSS | Quick Specs - Page 1
    installing, consult installation instructions packed with product/kit for current dimensional data. 30" MIN. width required 13" MAX. 12" MIN. 15-1/2" 16-1/4" (rear) 16" Exhaust outlet connects to 3-1/4"x10" duct For answers to your Monogram, GE Café™ Series, GE Profile™ Series or GE Appliances
  • GE JNM7196SKSS | Quick Specs - Page 2
    width to provide a custom built-in appearance. For installation between ­cabinets only; not for endof-cabinet installation. Each kit ­contains two 3"-wide filler panels. Filter Kit JX81H- Recirculating Charcoal Filter Kit To be used when the microwave oven cannot be vented to the outside. DUCT
  • GE JNM7196SKSS | Quick Specs - Page 3
    inside the microwave are easy to wipe away after steam loosens food grime Weight and time defrost - Simply enter the weight of the food, and the oven automatically sets the optimal defrosting time and power level or set your desired time for defrosting Upfront charcoal filter with indicator light
  • 1
  • 2
  • 3

Listed by
Underwriters
Laboratories
JNM7196SK
GE Appliances 1.9 cu. ft. Over-the-Range Sensor Microwave Oven with Recirculating Venting
Specification Created 2/16
105°
Door open
(without obstruction)
24-1/2
"
29-3/4"
16-1/4"
(rear)
15-1/2"
16"
13"
MAX.
12"
MIN.
66"
MIN.
Mounting
height from
floor
Minimum distance from
door hinge side to
adjacent wall should
equal
1/2"
.
30"
MIN.
width
required
Exhaust outlet
connects to
3-1/4"x10"
duct
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
For answers to your Monogram, GE Café
Series, GE Profile
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
NOTE:
Requires 120V grounded outlet. Electrical receptacle
must be located in cabinet above microwave oven. No
additional wiring, venting or cabinet rebuilding necessary in
many cases. Complete detailed, easy-to-follow installation
instructions and convenient full-size templates are packed
with the microwave oven.
IMPORTANT INFORMATION:
When installing the
microwave oven over a range, allow minimum of 2" from
bottom of microwave oven to top of range backguard to allow
for removal of light covers.
VENTILATION OPTIONS:
The microwave ovens are
designed for adaptation to the following three types of
ventilation:
-Outside exhaust (vertical – as shown)
-Outside exhaust (horizontal)
-Recirculating (non-vented ductless – see Filter Kit drawing)
INSTALLATION INFORMATION:
This information is
not intended to be used for installing unit described. Before
installing, consult installation instructions packed with
product/kit for current dimensional data.