GE NX-148E-RF User Manual
GE NX-148E-RF - Security NetworX NX-8E System Manual
 |
UPC - 782136715262
View all GE NX-148E-RF manuals
Add to My Manuals
Save this manual to your list of manuals |
GE NX-148E-RF manual content summary:
- GE NX-148E-RF | User Manual - Page 1
NetworX™ Series NX-148E-CF Commercial Fire LCD Keypad User manual - GE NX-148E-RF | User Manual - Page 2
is "on" to indicate fire alarm, flashes to indicate a trouble condition with your fire system. COMMERCIAL FIRE SYSTEM LCD KEYPAD Model NX-148E-CF READY light is "on" when the system is ready to arm, flashes if ready to "force arm". ARMED light is "on" when armed, "off" when disarmed, flashes to - GE NX-148E-RF | User Manual - Page 3
Installing/Service Company For Service Call Central Station This system is is not partitioned. EMERGENCY ACTIVATION KEYS (check if enabled) Fire Auxiliary Emergency Police PROGRAMMED FUNCTIONS Abort Delay (s) Battery Test Cancel Alarm Chime Forced Arming (s) Group Bypass (s) Quick Arm (s) - GE NX-148E-RF | User Manual - Page 4
- GE NX-148E-RF | User Manual - Page 5
4 UNDERSTANDING THE LIGHTS 6 KEYPAD FUNCTIONS 7 Arming Your System In The "Away" Mode 7 Making Your System Ready To Arm 7 Arming Your System In The "Stay" Mode 8 Using The Quick Arm 9 Disarming Your System 9 Cancel / Abort Feature 10 Bypassing Zones 10 Group Bypass 11 Unbypassing 11 - GE NX-148E-RF | User Manual - Page 6
the A.C. Transformer after testing. PLEASE READ THE FOLLOWING INFORMATION AND INSTRUCTIONS CAREFULLY BEFORE OPERATING YOUR SECURITY CONTROL SYSTEM. IF YOU DO NOT UNDERSTAND ANY PORTION OF THIS MANUAL, OR IF YOU HAVE ANY QUESTIONS ABOUT YOUR SYSTEM, CONTACT THE INSTALLING COMPANY. 4 NX-148E-CF - GE NX-148E-RF | User Manual - Page 7
protected area. Quick Arm: An option that allows you to turn on (ARM) the security system by pressing either the [STAY] or [EXIT] key on the keypad control (for ARMING only) as programmed by the installing company. User Code: A 4- or 6-digit entry used to arm or disarm the system. NX148E-CF 5 - GE NX-148E-RF | User Manual - Page 8
all interior zones are bypassed. Instant Message The LCD display will read "Instant" when the entry/exit door(s) have no delay. (See "Arming System in Stay Mode", page 8.) The doors can be changed from instant to delay (toggled) by pressing the [STAY] key when the system is armed. 6 NX-148E-CF - GE NX-148E-RF | User Manual - Page 9
Mode: Step 1 Close all protected doors and windows. Ready light will be on or flashing when all protected zones and sensors are secure. NOTE: If any zones System Ready Type Code to Arm are bypassed, a sensor in that zone can be violated without affecting the ready light. The security system - GE NX-148E-RF | User Manual - Page 10
that a zone(s) may be unprotected and can be faulted without an alarm. Step 4 To toggle from a "delayed entry" mode to an "Instant" mode, press the [STAY] key again. The LCD display will read "Instant" meaning the entry/exit doors do NOT have an entry System Armed Instant delay. 8 NX-148E-CF - GE NX-148E-RF | User Manual - Page 11
USING THE QUICK ARM The Quick Arm feature may be used if it is enabled. Quick Arm will allow the user to arm the security system in the AWAY mode by pressing the [EXIT] key. The system can be quick armed in the STAY mode by pressing the [STAY] key. This feature is used for ARMING ONLY, and will not - GE NX-148E-RF | User Manual - Page 12
for any other zone(s) that need to be bypassed. Press the [BYPASS] key again OR press # to exit the Bypass Mode. The bypass light will stop flashing upon exiting the Bypass Mode. Pressing the • - scroll keys will display all bypassed zones. Press the # key to exit this viewing mode. 10 NX-148E-CF - GE NX-148E-RF | User Manual - Page 13
the Fire alarm by pressing the Emergency Activation [Fire] key for two seconds. If your system is connected to a monitoring center, an emergency report could be sent to that center. This key should only be pressed in an emergency situation requiring response by fire department personnel. NX148E-CF - GE NX-148E-RF | User Manual - Page 14
reflects the available functions. ù=Zone Review 0=Set Tone 1=Master Mode 2=Service Check 3=Alarm Memory 44=Test 45=Display Test 46=Light Control 49=Español 5=User PIN 6=User Authority CHIME=Walk Test 7=Detector Reset EXIT=Silent Exit 90=Log Review 91=View Settings 97=Set Date/Time 12 NX-148E-CF - GE NX-148E-RF | User Manual - Page 15
the "Adjust Tone" mode. VIEW ALARM MEMORY Step 1 Press r 3 to display the zone(s) on the keypad that created the last alarm. Step 2 The LCD Screen will description for those display zones. the zone Alarm Memory ZONE 1 1 Step 3 Press [#] to exit the alarm memory. TEST FUNCTION (Optional - GE NX-148E-RF | User Manual - Page 16
you to switch between the two languages programmed in your keypad. NOTE: You must exit any other function mode before attempting to change languages. Step 1 Press r 4 9 . The LCD keypad is now toggled to the second language. Step 2 Repeat Step 1 to revert to the first language. 14 NX-148E-CF - GE NX-148E-RF | User Manual - Page 17
will now prompt for a code. Step 2 Enter [master code]. The LCD Screen will prompt for a user number. Step 3 Enter the 2-digit user number. Always use leading zeros when necessary, i.e. "04" for user number 4. The LCD will now prompt you for the attributes in the following chart. NX148E-CF 15 - GE NX-148E-RF | User Manual - Page 18
have now been performed. Step 3 If the keypad begins beeping, the reset did not execute properly. Enter your code to silence the keypad. Wait a few minutes and repeat step 2 to attempt another reset. If the keypad still beeps after repeated attempts, please contact your installer. 16 NX-148E-CF - GE NX-148E-RF | User Manual - Page 19
of the LCD, you can raise or lower the viewing angle of the text. Step 4 To advance to the Brightness option, press [r]. The LCD will prompt you to brighten or dim the LCD lighting. Use the scroll keys again to adjust to desired brightness. Step 5 When completed, exit by pressing [r]. NX148E-CF 17 - GE NX-148E-RF | User Manual - Page 20
SETTING THE SYSTEM CLOCK Step 1 Enter r 9 7 . The LCD Screen will prompt for a code. Step 2 Enter [ light will be illuminated. If the chime is off, the chime light will be off. Each press of the [CHIME] key will toggle the chime feature on/off and produce a momentary ding-dong sound. 18 NX-148E-CF - GE NX-148E-RF | User Manual - Page 21
if ANY area has the sounder on. This includes Entry delay, Exit delay, Chime, and Alarm. DISPLAYS IN THE PARTITIONING MASTER MODE ARMED and READY STATUS The LCD screen will display the Armed and Ready status of ALL eight (8) partitions if any or all of the areas is armed or not ready. NX148E-CF 19 - GE NX-148E-RF | User Manual - Page 22
, press [r][Area number]. For example: If Area 4 is armed, [r] [4] will disarm Area 4. If Area 4 is disarmed, [r] [4] will arm it. Press [STAY] during the exit delay to bypass all interior zones in the exit delay. To control the individual areas, refer to the following section. 20 NX-148E-CF - GE NX-148E-RF | User Manual - Page 23
ALARMS IN THE MULTI-PARTITION MODE If the keypad is sounding an alarm or the siren is running, it can be silenced by entering a code with the authority for the area(s) that are in alarm. NOTE: The [EXIT], [BYPASS], and [STAY] keys will only work if an individual partition is selected. NX148E-CF - GE NX-148E-RF | User Manual - Page 24
will suppress the sounder for 12 hours. Entering a valid code will silence the keypad sounder when it is pulsing. The arm/disarm state of your system will not change when entering a code to silence a pulsing keypad sounder. Please contact your installer if a trouble condition exists. 22 NX-148E-CF - GE NX-148E-RF | User Manual - Page 25
Power trouble Control Siren trouble Expansion Aux. comm. fail NX148E-CF (Optional) The Box Tamper circuit has activated. The control attempted to communicate a message to the Central Station, but was unsuccessful. A short to ground has been detected on a control circuit. Your system has lost total - GE NX-148E-RF | User Manual - Page 26
reporting to the control. Press [r] to identify the zone. A wireless device has a low battery. Press [r] to identify the zone. A zone is tampered. Press [r] to identify the tampered zone. A zone is experiencing some form of trouble (probably wiring). Press [r] to identify the zone. 24 NX-148E-CF - GE NX-148E-RF | User Manual - Page 27
Start Dnld End Dnld NX148E-CF DESCRIPTION Transmitter Low Battery The transmitter has a low battery. Zone Lost A wireless or multiplexed zone device is not reporting to the control. Duress The control has been armed or disarmed with a Duress code. Manual Fire Keypad "Fire" has been activated - GE NX-148E-RF | User Manual - Page 28
is on site. Technician is off site. A code has been entered. Reports when the first partition is disarmed. Reports when the last partition is armed. Instant sprinkler supervisory report Clock has been reset. A wireless expansion module is jammed A smoke detector requires cleaning. 26 NX-148E-CF - GE NX-148E-RF | User Manual - Page 29
fire alarm condition. For example, the following steps are recommended by the National Fire Protection Association and can be used as a guide Call the Fire Department from a neighbor's phone. NOTE: After the installation of your Security System has been completed, notify your local Fire and Police - GE NX-148E-RF | User Manual - Page 30
SYSTEM NOTES - GE NX-148E-RF | User Manual - Page 31
- GE NX-148E-RF | User Manual - Page 32
NX-148E-CF USERS MANUAL NX148ECFUB03 REV B (MAY2003)
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
 |
 |
NetworX
™
Series
NX-148E-CF Commercial Fire
LCD Keypad
User manual