GE NX-148E User Manual

GE NX-148E - Security NetworX LCD Keypad Manual

Get GE NX-148E - Security NetworX LCD Keypad PDF manuals and user guides
UPC - 782136404340
View all GE NX-148E manuals
Add to My Manuals
Save this manual to your list of manuals

GE NX-148E manual content summary:

  • GE NX-148E | User Manual - Page 1
    NetworX™ Series NX-148E-CF Commercial Fire LCD Keypad User manual
  • GE NX-148E | User Manual - Page 2
    is "on" to indicate fire alarm, flashes to indicate a trouble condition with your fire system. COMMERCIAL FIRE SYSTEM LCD KEYPAD Model NX-148E-CF READY light is "on" when the system is ready to arm, flashes if ready to "force arm". ARMED light is "on" when armed, "off" when disarmed, flashes to
  • GE NX-148E | User Manual - Page 3
    company to find out how your system is programmed. To Arm or Disarm or Silence Alarm: Enter your user code. To Quick Arm and Stay: Press "Stay" key. To Quick Arm and Exit: Press "Exit" key. Door Chime: Press "Chime" key to activate. Reset Smoke Detector and Panel Reset: Press 7 NX-148E-CF 1
  • GE NX-148E | User Manual - Page 4
  • GE NX-148E | User Manual - Page 5
    The System Clock 18 Using The Door Chime Feature 18 PARTITIONED SYSTEMS OPERATION 19 Lights In Partitioning Master Mode 19 Displays In The Partitioning Master Mode 19 KEYPAD CONTROL TONES (BEEPS 22 SERVICE DISPLAY 23 APPENDIX A - EVENT LOG 25 EMERGENCY EVACUATION PLANS 27 NX-148E-CF 3
  • GE NX-148E | User Manual - Page 6
    the A.C. Transformer after testing. PLEASE READ THE FOLLOWING INFORMATION AND INSTRUCTIONS CAREFULLY BEFORE OPERATING YOUR SECURITY CONTROL SYSTEM. IF YOU DO NOT UNDERSTAND ANY PORTION OF THIS MANUAL, OR IF YOU HAVE ANY QUESTIONS ABOUT YOUR SYSTEM, CONTACT THE INSTALLING COMPANY. 4 NX-148E-CF
  • GE NX-148E | User Manual - Page 7
    protected area. Quick Arm: An option that allows you to turn on (ARM) the security system by pressing either the [STAY] or [EXIT] key on the keypad control (for ARMING only) as programmed by the installing company. User Code: A 4- or 6-digit entry used to arm or disarm the system. NX148E-CF 5
  • GE NX-148E | User Manual - Page 8
    in order to prevent an alarm. The user may then re-arm the system and exit before the delay expires.) Fire Light A steady fire light means a fire zone has been faulted. A rapidly flashing fire light means that a fire zone is in a trouble condition. Power Light The power light is on if the
  • GE NX-148E | User Manual - Page 9
    power if possible. If not, contact the installing company. Step 2 Enter your 4 or 6 digit user code to arm the system. The armed and exit lights will illuminate. You may now leave the building. System Armed All Zones Secure IMPORTANT! The exit light will flash rapidly for the last 10 seconds
  • GE NX-148E | User Manual - Page 10
    that a zone(s) may be unprotected and can be faulted without an alarm. Step 4 To toggle from a "delayed entry" mode to an "Instant" mode, press the [STAY] key again. The LCD display will read "Instant" meaning the entry/exit doors do NOT have an entry System Armed Instant delay. 8 NX-148E-CF
  • GE NX-148E | User Manual - Page 11
    designated Entry/Exit doors, the keypad control will sound a continuous tone for the duration of the entry delay time, or until you enter a valid code. Step 1 Step 2 Enter a valid user code. Type code to The red armed light will go off and Disarm the tone will stop. The security system is now
  • GE NX-148E | User Manual - Page 12
    : Step 1 Press the [BYPASS] key. Step 2 When the LCD prompts for a code (optional, if programmed), enter your user code. Step 3 The bypass light flashes. Step 4 Enter the zone you wish to bypass. (Example: Press 6 for zone 6 or 1 1 2 for zone 112.) Step 5 Step 6 Step 7 Press the [BYPASS] key
  • GE NX-148E | User Manual - Page 13
    the Fire alarm by pressing the Emergency Activation [Fire] key for two seconds. If your system is connected to a monitoring center, an emergency report could be sent to that center. This key should only be pressed in an emergency situation requiring response by fire department personnel. NX148E-CF
  • GE NX-148E | User Manual - Page 14
    reflects the available functions. ù=Zone Review 0=Set Tone 1=Master Mode 2=Service Check 3=Alarm Memory 44=Test 45=Display Test 46=Light Control 49=Español 5=User PIN 6=User Authority CHIME=Walk Test 7=Detector Reset EXIT=Silent Exit 90=Log Review 91=View Settings 97=Set Date/Time 12 NX-148E-CF
  • GE NX-148E | User Manual - Page 15
    r 3 to display the zone(s) on the keypad that created the last alarm. Step 2 The LCD Screen will description for those display zones. the zone Alarm Memory ZONE 1 1 Step 3 Press [#] to exit the alarm memory. TEST FUNCTION (Optional, if programmed) If programmed, this function will perform
  • GE NX-148E | User Manual - Page 16
    you to switch between the two languages programmed in your keypad. NOTE: You must exit any other function mode before attempting to change languages. Step 1 Press r 4 9 . The LCD keypad is now toggled to the second language. Step 2 Repeat Step 1 to revert to the first language. 14 NX-148E-CF
  • GE NX-148E | User Manual - Page 17
    will now prompt for a code. Step 2 Enter [master code]. The LCD Screen will prompt for a user number. Step 3 Enter the 2-digit user number. Always use leading zeros when necessary, i.e. "04" for user number 4. The LCD will now prompt you for the attributes in the following chart. NX148E-CF 15
  • GE NX-148E | User Manual - Page 18
    have now been performed. Step 3 If the keypad begins beeping, the reset did not execute properly. Enter your code to silence the keypad. Wait a few minutes and repeat step 2 to attempt another reset. If the keypad still beeps after repeated attempts, please contact your installer. 16 NX-148E-CF
  • GE NX-148E | User Manual - Page 19
    of the LCD, you can raise or lower the viewing angle of the text. Step 4 To advance to the Brightness option, press [r]. The LCD will prompt you to brighten or dim the LCD lighting. Use the scroll keys again to adjust to desired brightness. Step 5 When completed, exit by pressing [r]. NX148E-CF 17
  • GE NX-148E | User Manual - Page 20
    SETTING THE SYSTEM CLOCK Step 1 Enter r 9 7 . The LCD Screen will prompt for a code. Step 2 Enter [ light will be illuminated. If the chime is off, the chime light will be off. Each press of the [CHIME] key will toggle the chime feature on/off and produce a momentary ding-dong sound. 18 NX-148E-CF
  • GE NX-148E | User Manual - Page 21
    will illuminate if ANY one area has a Fire condition. The fire light will flash if ANY area has a Fire Trouble condition. POWER will illuminate if the primary power is connected to the NX-8 control panel. It will flash if the system has a low standby battery condition. STAY will illuminate if ANY
  • GE NX-148E | User Manual - Page 22
    be Force Armed. System Ready Type code to arm If ALL areas are disarmed and ready to arm, this display will appear on the LCD screen. ARMING AND ] during the exit delay to bypass all interior zones in the exit delay. To control the individual areas, refer to the following section. 20 NX-148E-CF
  • GE NX-148E | User Manual - Page 23
    ALARMS IN THE MULTI-PARTITION MODE If the keypad is sounding an alarm or the siren is running, it can be silenced by entering a code with the authority for the area(s) that are in alarm. NOTE: The [EXIT], [BYPASS], and [STAY] keys will only work if an individual partition is selected. NX148E-CF
  • GE NX-148E | User Manual - Page 24
    will suppress the sounder for 12 hours. Entering a valid code will silence the keypad sounder when it is pulsing. The arm/disarm state of your system will not change when entering a code to silence a pulsing keypad sounder. Please contact your installer if a trouble condition exists. 22 NX-148E-CF
  • GE NX-148E | User Manual - Page 25
    Power trouble Control Siren trouble Expansion Aux. comm. fail NX148E-CF (Optional) The Box Tamper circuit has activated. The control attempted to communicate a message to the Central Station, but was unsuccessful. A short to ground has been detected on a control circuit. Your system has lost total
  • GE NX-148E | User Manual - Page 26
    reporting to the control. Press [r] to identify the zone. A wireless device has a low battery. Press [r] to identify the zone. A zone is tampered. Press [r] to identify the tampered zone. A zone is experiencing some form of trouble (probably wiring). Press [r] to identify the zone. 24 NX-148E-CF
  • GE NX-148E | User Manual - Page 27
    Start Dnld End Dnld NX148E-CF DESCRIPTION Transmitter Low Battery The transmitter has a low battery. Zone Lost A wireless or multiplexed zone device is not reporting to the control. Duress The control has been armed or disarmed with a Duress code. Manual Fire Keypad "Fire" has been activated
  • GE NX-148E | User Manual - Page 28
    . A code has been entered. Reports when the first partition is disarmed. Reports when the last partition is armed. Instant sprinkler supervisory report Clock has been reset. A wireless expansion module is jammed A smoke detector requires cleaning. 26 NX-148E-CF
  • GE NX-148E | User Manual - Page 29
    . Be ready to slam the door if smoke or heat rush in. Practice escaping to the outdoors and meeting in an assigned spot. Call the Fire Department from a neighbor's phone. NOTE: After the installation of your Security System has been completed, notify your local Fire and Police Departments to give
  • GE NX-148E | User Manual - Page 30
    SYSTEM NOTES
  • GE NX-148E | User Manual - Page 31
  • GE NX-148E | User Manual - Page 32
    NX-148E-CF USERS MANUAL NX148ECFUB03 REV B (MAY2003)
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
NetworX
™
Series
NX-148E-CF Commercial Fire
LCD Keypad
User manual