GE PB905STSS Quick Specs

Dimensions and Installation Information (in inches)

For answers to your Monogram,

®

GE Profile

™

or

GE

®

appliance questions, visit our website at

geappliances.com or call GE Answer Center

®

service, 800.626.2000.

Listed by

Underwriters

Laboratories

All GE ranges are equipped with

an Anti-Tip device. The installation

of this device is an important,

required step in the installation

of the range.

†

Note:

Check local codes for required breaker size.

Effective January 1, 1996, the National Electrical Code requires that new

construction (not existing) utilize a 4-conductor connection to an electric range.

Receptacle Locations

Locally approved flexible service cord or conduit must be used because terminals

are not accessible after range installation. See shaded area in drawing for location

of electrical outlet box. Recommended outlet locations allow range to be installed

directly against wall.

Note:

30" ranges conform to U.L. requirements for 0" spacing from adjacent

walls below countertops. To reduce possibility of scorching walls, engineering

recommends a minimum of 1-1/2" spacing to allow for possible extended, high-

heat, no-load heating element operation.

Installation Information:

Before installing, consult installation instructions

packed with product for current dimensional data.

KW Rating

240V

12.9

208V

9.7

Breaker Size

40 Amps

†

PB905ST

GE Profile

™

30” Free-Standing Convection Range

Specification Revised 7/11

221032