GE PFIC1NFZBV Quick Specs

GE PFIC1NFZBV Manual

GE PFIC1NFZBV manual content summary:

  • GE PFIC1NFZBV | Quick Specs - Page 1
    forward Water hook-up on the refrigerator IMPORTANT: Before finalizing specifications for your GE Profile counter-depth refrigerator, please NOTE: • A minimum width of 36" is required for refrigerator installation • Be sure to allow for 1/2" or 3/4" side panels in addition to the 36" minimum
  • GE PFIC1NFZBV | Quick Specs - Page 2
    3/4 2-1/2 nel Panel Panel Panel Panel Freezer Door Freezer Door Freezer Door Filler Filler 3/4 2-1/2 Filler 3/4 2-1/2 3/4 2-1/2 Panel Panel For answersPtaoneylour Monogram,® GE Profile™ or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800
  • GE PFIC1NFZBV | Quick Specs - Page 3
    Ceiling Water Electrical 3/4" Airspace (1/2" Gap + 1/4" Wall Plates) 13" to 14" Cabinet 25" Counter Top Fig 2A eps Trim 70-1/4"* 21 cu. ft. models For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800
  • GE PFIC1NFZBV | Quick Specs - Page 4
    . • Cabinet pieces to order: (2) side panels and (1) wall cabinet. • Side panels will typically be attached to adjacent cabinets and/or cleated to rear wall and floor. • Refer to GE refrigerator installation instructions for proper plumbing, and electrical and air clearances. • (1) Some framed
  • GE PFIC1NFZBV | Quick Specs - Page 5
    GE Profile™ Counter-Depth 20.7 Cu. Ft. Bottom-Freezer Drawer Refrigerator door • NeverClean™ condenser - Encased coils take the dirty work out of maintaining your refrigerator • Model PFIC1NFZWV - White on white • Model PFIC1NFZBV - Black on black PFIC1NBWWV PFIC1NBWBV PFIC1NFWWV Specification
  • 1
  • 2
  • 3
  • 4
  • 5

Dimensions and Installation Information (in inches)
For answers to your Monogram,
®
GE Profile
or
GE
®
appliance questions, visit our website at
geappliances.com or call GE Answer Center
®
service, 800.626.2000.
Specification Revised 8/10
210820
Overall
Dimensions
Height to top of hinge (in.)
A
69-5/8
Height to top of case (in.)
B
69
Case depth without door (in.)
C
23-7/8
Case depth less door handle (in.)
D
26-3/4*
Case depth with door handle (in.)
E
31
Depth with fresh food door open 90° (in.)
F
43-1/2
Width (in.)
G
35-7/8
Width with door open 90° inc. door handle (in.)
H
44
Air
Clearances
Each side (in.)
1/8
Top (in.)
1
Back (in.)
1/2
A
Front View
Top View
G
D
C
F
B
E
H
PFIC1NFZ
GE Profile
Counter-Depth 20.7 Cu. Ft. Bottom-Freezer Drawer Refrigerator
Listed by
Underwriters
Laboratories
Note:
Anti-tip bracket part number 200D8494P001 will be shipped with
every counter-depth model
*Does NOT include a decorative panel
IMPORTANT:
Before finalizing specifications
for your GE Profile counter-depth refrigerator,
please NOTE:
• A minimum width of 36" is required for
refrigerator installation
• Be sure to allow for 1/2" or 3/4" side panels
in addition to the 36" minimum
Installation of water outlets
Recommended water line
location using recess
in rear wall
Recommended single loop
of 1/4" pex water line
Water hook-up
on the refrigerator
Rear Wall View
18"
24"
Allow 48" minimum water
line to enable refrigerator
to be pulled forward
Alternate
water
line location
through floor
1/2"
Top View
Above illustration intended for dimensional
reference only. Refer to photography for
actual product appearance.