GE PSB9240EFES Quick Specs
GE PSB9240EFES Manual
 |
View all GE PSB9240EFES manuals
Add to My Manuals
Save this manual to your list of manuals |
GE PSB9240EFES manual content summary:
- GE PSB9240EFES | Quick Specs - Page 1
over centerline of cabinet (Must support 130 lbs.) 1" Min. above installations. Please see installation instructions for full details. Cabinet width GE Café™ Series, GE Profile™ Series or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service - GE PSB9240EFES | Quick Specs - Page 2
the required interior depth and height. See Warming Drawer installation instructions for details. INSTALLATION OVER A GE/ MONOGRAM OVEN AND WARMING DRAWER: Warming Drawer: Construct Solid 30" 23-1/2" Bottom Min. 3/8" Plywood Supported by 2x4 or 2x2 Runners all 25-1/4" Four Sides Min - GE PSB9240EFES | Quick Specs - Page 3
PSB9240EF GE Profile™ Series 30 in. Single Wall Oven with Advantium® Technology FEATURES AND BENEFITS menu selections - Preprogrammed selections make meals easy Custom recipe saver - Conveniently store cooking instructions for up to 30 different recipes Three-Speed, 300-CFM venting system Allows for
-
1 -
2 -
3
 |
 |
Listed by
Underwriters
Laboratories
PSB9240EF
GE Profile
™
Series 30 in. Single Wall Oven with Advantium
®
Technology
Specification Created 2/16
For answers to your Monogram, GE Café
™
Series, GE Profile
™
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
NOTE:
Cabinets
installed adjacent
to wall ovens must
have an adhesion
spec of at least a
194°F temperature
rating.
NOTE:
2" minimum
between cutouts
when installed
above warming
drawer or single
wall oven.
INSTALLATION
INFORMATION:
Before installing,
consult
installation
instructions packed
with product for current
dimensional data.
lbs.)
2x4’s or
equivalent
solid floor
e
25-1/8"
Cutout width
cabinet
width
Required
cutout location
36-3/4"
minimum
from floor
Junction box
location
(240-volt
models only)
4-3/16"
21-1/2"
To Back of Control
17-1/2"
Cutout height
A
B
23-1/2"
Cutout depth
Note:
Cabinets installed adjacent
to wall ovens must have an adhesion
spec of at least 194° F temperature rating.
Construct Solid
Bottom Min.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
Conduit
(48-1/2"
long)
19-1/8"
29-3/4"
A=Allow 1" overlap of oven over bottom edge of cutout.
B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.
ADVANTIUM WALL OVEN/GE PROFILE
™
SERIES COOKING
TOWER DIMENSIONS AND CABINET INSTALLATION
INFORMATION (IN INCHES)
C
L
(Must support 130 lbs.)
2x4’s or
equivalent
solid floor
Suitable
bracing
to support
runners
21-5/8"
over centerline
of cabinet
1" Min. above toekick or adjust
to oven installation height
2" MIN between cutouts
2-1/2" MIN between cutouts
recommended—2" MIN required
9-1/4" cutout height
28-1/2" cutout width
Junction box location
A
B
A
B
Construct Solid Bottom
MIN 3/8" Plywood Supported by
2 x 4 or 1 x 2 Runners, all Four Sides.
(Must Support 150 lbs. for Advantium)
(Must Support 200 lbs. for Wall Oven)
4-3/16
Conduit
(46" long)
Cabinet width
(240-volt models only)
21-1/2"
To back
of Control
19-1/8"
29-3/4"
NOTE:
Advantium 240 volt models cannot be installed under 36 inches height.
NOTE:
Use of the accessory drawer will replace the bottom trim piece for
applicable installations. Please see installation instructions for full details.