GE PT9050SFSS Quick Specs
GE PT9050SFSS Manual
 |
View all GE PT9050SFSS manuals
Add to My Manuals
Save this manual to your list of manuals |
GE PT9050SFSS manual content summary:
- GE PT9050SFSS | Quick Specs - Page 1
27-5/16" MAX. Recommended cutout location from floor CEonduit 40" D 22" Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions. Recommended cutout location from floor 32-1/23" 0'' 32-1/2" 23" minimum - GE PT9050SFSS | Quick Specs - Page 2
and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle. Gas or electric cooktops may be installed over this oven. See cooktop installation instructions for cutout size. See label on top of oven for approved cooktop models. 240V / 208V Junction box 25 - GE PT9050SFSS | Quick Specs - Page 3
GE Profile™ Series 30 in. Built-In Single Convection Wall Oven Features and Benefits • True European Convection with Direct Air - Bakes evenly as warm air blows from the top in and around bakeware • Connected - Wirelessly control oven functions from your smartphone • Notification Lighting
-
1 -
2 -
3
 |
 |
Listed by
Underwriters
Laboratories
*ADA qualified based
on Uniform Federal
Accessibility Standards
For answers to your Monogram
®
or GE appliance
questions, visit our website at geappliances.com
or call GE Answer Center
®
service, 800.626.2000.
*
F
E
22
"
Conduit
40"
D
Cutout depth
23-1/2" MIN
B
C
2
2
23" minimum
door opening
allowance
22" to
bottom of
junction box
Junction box
location
9-1/2"
MAX.
Dimensions and Installation Information (in inches)
Most 30” Wall Cabinets can be used with this
unit.
Note:
These ovens are not approved for
stackable installations.
Cabinets installed
adjacent to wall ovens must have an adhesion
spec of at least a 194°F temperature rating.
Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45° and 90°
walls should be placed to avoid interference
with the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle. They
must be hard wired in accordance with
installation instructions
.
Installation Information:
Before installing,
consult installation instructions packed with
product for current dimensional data.
Side-by-side installations rerquire at least 2"
between cutouts.
B
30''
A
C
Cutout width
28-1/2" MIN.
28-5/8" MAX.
Recommended
cutout location
from floor
32-1/2"
Cutout height
27-1/4" MIN.
27-5/16" MAX.
f
box
KW Rating
240V
4.5
208V
3.4
Breaker Size
240V
20 Amps
208V
20 Amps
C
L
Suitable
bracing
to support
runners
(must support 200 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Cabinet
30"
A – Overlap of oven at top of cutout
1-1/4"
B – Overlap of oven over side of edges of cutout
3/4"
C – Overlap of oven at bottom of cutout
1-1/4"
Oven
D – Overall depth with handle
27-3/16"
E – Overall height with trim
28-3/8"
F
– Overall width
29-3/4"
PT9050
Specification Revised 4/13
220253
PT9050SF
GE Profile
™
Series 30 in. Built-In Single Convection Wall Oven