GE PT920 Dimensions
GE PT920 - Profile 30 in. Wall Oven Manual
 |
View all GE PT920 manuals
Add to My Manuals
Save this manual to your list of manuals |
GE PT920 manual content summary:
- GE PT920 | Dimensions - Page 1
2" between cutouts. For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000. CL 2 x 4 or equivalent runners Suitable bracing to support 21-5/8" over centerline C runners of cabinet (must - GE PT920 | Dimensions - Page 2
PT920DR GE Profile™ 30" Built-In Single Convection Wall Oven Optional Undercounter Dimensions and Installation Information With Electric Cooktop 1-1/2" Typical countertop Note: 36" radiant and induction cooktops are approved for use over GE 30" single wall ovens only. 30" radiant and induction - GE PT920 | Dimensions - Page 3
PT920DR GE Profile™ 30" Built-In Single Convection Wall Oven Features and Benefits • Glass Touch LCD Controls-Combine a smooth, easy-to-clean glass design with large, easy-to-read graphics to facilitate easier usage • Black gloss oven interior-Black oven interior adds a stylish touch to any
-
1 -
2 -
3
 |
 |
Listed by
Underwriters
Laboratories
For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
geappliances.com or call GE Answer Center
®
service, 800.626.2000.
Specification Revised 5/11
220249
PT920DR
GE Profile
™
30" Built-In Single Convection Wall Oven
KW Rating
240V
3.8
208V
2.8
Breaker Size
240V
20 Amps
208V
20 Amps
Most 30” Wall Cabinets can be used with this unit.
Note:
These ovens are not approved for
stackable installations.
Cabinets installed
adjacent to wall ovens must have an adhesion
spec of at least a 194°F temperature rating.
Door handle protrudes 3" from door face. Cabinets
and drawers on adjacent 45° and 90° walls should
be placed to avoid interference with the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle. They
must be hard wired in accordance with
installation instructions
.
Installation Information:
Before installing, consult
installation instructions packed with product for
current dimensional data.
Side-by-side installations require at least 2"
between cutouts.
Cutout width
28-1/2'' MIN.
28-5/8'' MAX.
29-3/4
C
30
Recommended
cutout location
32-1/2"
from floor
21
Junction
box
location
Allow minimum of 21'' for clearance
to adjacent corners, drawers, walls, or etc.
A=Allow 1" overlap of oven over top and bottom edges of cutout.
B=Allow 11/16"–3/4" for overlap of oven over side edges of cutout.
C=28-1/4" without trim and 28-3/4" with trim.
Conduit
48-1/2"
5
27-1/4'' MIN.
27-5/16'' MAX.
Cutout height
A
B
23-1/2'' MIN.
Cutout depth
22'' MIN.
C
L
2 x 4 or
equivalent
runners
Suitable
bracing
to support
runners
21-5/8"
over centerline
of cabinet
(must support 275 lbs.)
Dimensions and Installation Information (in inches)