GE PT956SMSS Dimensions
GE PT956SMSS - 30 Inch Double Electric Wall Oven Manual
 |
UPC - 084691150831
View all GE PT956SMSS manuals
Add to My Manuals
Save this manual to your list of manuals |
GE PT956SMSS manual content summary:
- GE PT956SMSS | Dimensions - Page 1
Cutout width PT956SM28-1/2'' MIN. 28-5/8'' MAX. 5 GE Profile™ 30" Built-In Double Cutout depth 23-1/2" MIN Convection/Thermal Wall Oven E Junction box Dimensions aAnd Installation Information l(oicnaitinocnhes) B KW RatinCgonduit 240V 9l.(o07n2g") 208V 6.8 Breaker Size 240V D 40 Amps - GE PT956SMSS | Dimensions - Page 2
PT956SM GE Profile™ 30" Built-In Double Convection/Thermal Wall Oven Features and Benefits • Glass Touch Controls - Features a smooth glass design that is easy-to- operate and easy-to-clean • Precise Air™ Convection System (Upper Oven Only) - Provides even air and heat circulation for superior
-
1 -
2
 |
 |
For answers to your Monogram,
®
GE Profile
™
or
GE
®
appliance questions, visit our website at
ge.com or call GE Answer Center
®
service,
800.626.2000.
Listed by
Underwriters
Laboratories
Specification Revised 6/09
220141
PT956SM
GE Profile
™
30" Built-In Double Convection/Thermal Wall Oven
Note:
Cabinets installed adjacent to wall ovens
must have an adhesion spec of at least a 194°F
temperature rating.
Electric wall ovens are
not approved for installation with a plug and
receptacle. They must be hard wired in accordance
with installation instructions
.
Door handle protrudes 3"
from door face. Cabinets
and drawers on adjacent 45° and 90° walls should be
placed to avoid interference with the handle.
Installation Information:
Before installing, consult
installation instructions packed with product for
current dimensional data.
KW Rating
240V
9.0
208V
6.8
Breaker Size
240V
40 Amps
208V
40 Amps
21" minimum
Door Opening
Allowance
B
B
A
A
Cutout height
51-13/16" MIN.
51-15/16" MAX.
Minimum cutout location
12" from the floor.
Cutout depth
23-1/2" MIN
5
47" to
bottom of
junction box
Cutout width
28-1/2'' MIN.
28-5/8'' MAX.
21
Cabinet
width 30"
C
E
D
MOST 30'' WALL CABINETS CAN BE USED WITH THIS UNIT.
THE OPENING BETWEEN THE INSIDE WALLS MUST BE AT LEAST 28-1/2'' WIDE.
Conduit
48-1/2"
Junction box
location
Dimensions and Installation Information (in inches)
C
L
2 x 4 or
equivalent
runners
Suitable
bracing
to support
runners
21-5/8"
over centerline
of cabinet
(must support 325 lbs.)
Cabinet
30"
A – Overlap of oven over side of edges of cutout
11/16"-3/4"
B – Overlap of oven at top and bottom of cutout
1"
Oven
C – Overall depth*
23-1/2"
D – Overall height with trim
53-3/8"
Overall height without trim
52-7/8"
E
– Overall width
29-3/4"
*Depth including door handle is approximately 26-6/10" min. to
26-9/10" max.