GE RM24970 Instruction Manual
GE RM24970 - Remote Control For Home Theater Manual
 |
UPC - 030878249706
View all GE RM24970 manuals
Add to My Manuals
Save this manual to your list of manuals |
GE RM24970 manual content summary:
- GE RM24970 | Instruction Manual - Page 1
RM24970 Universal Remote Instruction Manual - GE RM24970 | Instruction Manual - Page 2
own Volume/Mute..... 15 Troubleshooting 16 Congratulations on your purchase of a 7 function Universal Remote Control. This remote is one of the most easy to use remote controls available today. Now juggling multiple remote controls is a thing of the past! Your Universal Remote controls up to seven - GE RM24970 | Instruction Manual - Page 3
press any buttons until batteries are installed in the remote. If buttons are pressed without batteries in the remote, all codes will be lost. Code Setup The CODE SEARCH button is used to setup the remote. You can either setup the remote using the code tables (on separate sheet), or you can search - GE RM24970 | Instruction Manual - Page 4
controlling. E.G. PREV.CH may be called RECALL, or ENTER may be called DISPLAY. These differences depend on the brand and model of your product. Also, this remote DOWN Changes the volume level of the product, normally the TV. CODE SEARCH For setup. 0-9 Enter numbers for direct channel selection. Some - GE RM24970 | Instruction Manual - Page 5
buttons and SELECT used to move through on-screen menuing and guides. With some DBS models the DISP button should be used to FF, PAUSE VCR control buttons operate your VCR even when the remote is set to operate the TV. Also operates DVD Scan -/+. Note the VCR keys also control DVD when in DVD - GE RM24970 | Instruction Manual - Page 6
TAPE, TUNER, TV, VIDEO Used to directly select the device you want to control. (Works in AUDIO mode). AM/FM Lets you select the AM/FM band on work for all brands. Turning on the Receiver or Mini-System Point the remote control at the receiver and press the AUDIO button. The receiver should turn on. - GE RM24970 | Instruction Manual - Page 7
CHAN+ or CHAN- buttons to move up and down channel presets. Home Theater Systems With GE receivers, a second press of the TV button turns the receiver on. 1. Turn the . 4. Press the VOL+ or VOL- buttons to control volume. NOTE: The volume buttons may operate both the TV and the receiver volume - GE RM24970 | Instruction Manual - Page 8
Surround Sound Feature The surround sound feature may be turned ON/ OFF by pressing the SURR ON•OFF button. 1. Press the SURR MODE button until the desired mode is found. 2. Press DELAY+ or DELAY- to achieve the desired delay affect. 3. Press the DSP ON•OFF button to turn DSP (Digital Sound - GE RM24970 | Instruction Manual - Page 9
button (TV, VCR, etc.). The red indicator blinks, then stays lit. 3. Enter the 4 digit code from the code tables (on separate sheet). Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes. 4. With your device on, press ON•OFF. If the device turns - GE RM24970 | Instruction Manual - Page 10
does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following these steps. 1. Manually turn on the device (TV, VCR, etc.) to be controlled. 2. Press and hold the CODE SEARCH button until the red indicator stays on, then - GE RM24970 | Instruction Manual - Page 11
Your Remote Code Identification The Code Identification Feature allows you to identify the four digit library code stored under your device button. For example, if you want to find out what four digit code is stored under your TV device button, follow the six steps below: 1. Press and hold the CODE - GE RM24970 | Instruction Manual - Page 12
after a period of 1 to 99 minutes as shown below. The remote must be in TV mode to set a Sleep Timer. This blink off to indicate button press acceptance. 5. TV Sleep Timer is set. 6. Leave the Remote pointing towards the TV with an unobstructed path. To cancel the Sleep Timer, press and hold - GE RM24970 | Instruction Manual - Page 13
, if you have a TV/ DVD Combo, you might need to set up one code under the TV button to control the TV part AND a separate code (under any other Mode button) to control the DVD part. VCR/DVD Punch-Through This remote allows the 6 VCR transport buttons (i.e. PLAY, PAUSE, STOP, FF, REWIND, and REC) to - GE RM24970 | Instruction Manual - Page 14
Using Your Remote, cont. Volume/Mute Control and PunchThrough This remote lets you select which device Mode controls your Volume/Mute buttons. The remote is initially set for all device Modes to use their own Volume/Mute control if present. If the programmed code has no Volume/Mute operation of its - GE RM24970 | Instruction Manual - Page 15
Using Your Remote, cont. Volume/Mute Control This routine can set any Mode to use only its own Volume/Mute control. Note - If your chosen Mode has no Volume/Mute functions of its own then the Volume/Mute buttons will do nothing. 1. Press and hold the CODE SEARCH button ubnutitlotnh.e red indicator - GE RM24970 | Instruction Manual - Page 16
Troubleshooting Remote does not operate your product. • Press the device button of the product you want to control. • Program the remote with a new code. • Install new batteries. (You might have to reprogram your remote after installing new batteries.) • Remote may not be compatible with your - GE RM24970 | Instruction Manual - Page 17
90 Day Limited Warranty Jasco Products Company warrants this product to be free from manufacturing defects for a period of ninety days from the original date of consumer purchase. This warranty is limited to the repair or replacement of this product only and does not extend to consequential or - GE RM24970 | Instruction Manual - Page 18
RM24970 Universal Remote Instruction Manual Jasco Products Company 311 N.W. 122nd Oklahoma City, OK 73114 Made in China RM24970-
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
 |
 |
Universal Remote
Instruction Manual
RM24970